Belfuse SI-50154-F Compatible LINK-PP LPJ1014AHNL 10/100 Base-T Integrated RJ45 Magnetics Connector 1x1 Port Tab Up
P/N:
LPJ1014AHNL
Manufacturer:
LINK-PP
Compatible Brand:
Belfuse
Compatible P/N:
LPJ1014AHNL
- Compatible Brands: Belfuse
- Number of Ports: 1X1
- Speed: 100Base-TX,10Base-T
- PoE: Non-PoE
- Latch: Up
- Mounting Type: THT
- LED Option: Green / Yellow
- Shield EMI Tabs: YES
- Temperature: 0℃ to 70℃
- P/N: LPJ1014AHNL
- Manufacturer: LINK-PP
- Compatible Brand: Belfuse
- Compatible P/N: SI-50154-F
Packaging Details:
N.W/pCS:
0.009kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1000pcs
Carton size:
32*30*31cm
G.W/carton:
8.5kg
Product Specifications
| LINK-PP Part Number | LPJ1014AHNL | Belfuse Part Number | SI-50154-F |
| Part Status | Active | Connector Type | Jack |
| Number of Positions/Contacts | 8P8C (RJ45, Ethernet) | Application-LAN | Ethernet (Non-PoE) |
| Number of Ports | 1x1 Port | Speed | 10/100BASE-T |
| Latch | Up | Cores per Port | 4 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | Side Entry |
| Shield EMI Tabs | With | LED Option | Green / Yellow |
| PCB | FR4 | PCB Retaining Post | T-Post |
| Package Height (Inches/mm) | 0.530 / 13.45 | Package Length (Inches/mm) | 0.994 / 25.25 |
| Package Width (Inches/mm) | 0.636 / 16.15 | Temperature | 0°C to +70°C |
| BST Circuit | Yes | AutoMDX | Yes |
| Diodes | No | Contact Mating Area Plating | Gold 6µ" / 15µ" / 30µ" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T, C |
Belfuse SI-50154-F Compatible Single-Port 10/100BASE-T Integrated RJ45 MagJack
The LINK-PP LPJ1014AHNL is a single-port integrated RJ45 MagJack designed for 10/100BASE-T Fast Ethernet applications in non-PoE network architectures. Featuring a Tab-Up (top latch) orientation and an 8P8C modular interface, it combines 4-core isolation magnetics, Bob Smith termination, and Green/Yellow status LEDs inside a shielded through-hole housing.
The connector features a 90° right-angle, side-entry profile with perimeter EMI grounding tabs, T-Post mechanical PCB retention, and a commercial operating temperature range of 0°C to +70°C. It is positioned as a compatible alternative to the Belfuse SI-50154-F for smart cameras, game controllers, solar inverters, and embedded networking hardware where standard board-edge mounting and integrated physical-layer filtering are primary design considerations.
Hardware designers should verify the mechanical drawing, pin assignment, PCB land pattern, and PHY manufacturer interface guidelines against product documentation before releasing PCB layouts for production.
Belfuse SI-50154-F Compatible Design Positioning
The LPJ1014AHNL is positioned as a compatible alternative to the Belfuse SI-50154-F for 10/100BASE-T Fast Ethernet applications, providing hardware engineering and procurement teams with a potential second-source option for designs requiring comparable package, footprint, and electrical interface characteristics.
To ensure proper integration on existing or new motherboard designs, engineering teams should cross-reference the mechanical drawing, pin assignment, solder pad geometry, and electrical characteristics against original design requirements prior to volume release.
10/100BASE-T Signal Transmission and 4-Core Magnetics Architecture
Fast Ethernet (100BASE-TX) communication utilizes two differential pairs: one dedicated to transmit (TX) and one to receive (RX). The LPJ1014AHNL incorporates an internal 4-core magnetic structure with a 1CT:1CT turns ratio (T, C configuration), providing galvanic isolation and common-mode filtering specifically for these active pairs.
Because the connector is engineered specifically for non-PoE architectures, the internal magnetic layout is dedicated to differential data transmission without allocating space or thermal margins to high-current DC power paths. This supports balanced physical-layer signal coupling across the operating temperature range.
Hardware designers should evaluate the MagJack in conjunction with the host Fast Ethernet PHY transceiver, differential trace layout, ground plane design, and enclosure EMC strategy to ensure proper physical-layer performance.
Mechanical and PCB Design Considerations
Physical mounting orientation and board anchoring are key considerations when integrating right-angle through-hole RJ45 jacks:
1. 8P8C Interface and PCB Termination
The 8P8C configuration features an 8-contact RJ45 mating face alongside through-hole termination pins on the PCB side. The terminal pins accommodate differential data lines, common-mode termination references, and integrated LED connections.
Engineers should consult the official mechanical drawing to verify pin pitch, drill diameters, and trace clearance requirements before releasing board artwork.
2. Tab-Up Latch Orientation
The Tab-Up configuration positions the RJ45 plug latch release toward the upper side of the connector. This orientation provides unobstructed latch access when the connector is mounted along the bottom edge of a circuit board or near the lower boundary of an equipment faceplate.
3. T-Post Mechanical Retention
A molded T-Post locating peg anchors the connector body securely to the FR4 PCB. It assists in absorbing lateral and axial forces during cable insertion and extraction, supporting solder-joint reliability under mechanical stress.
4. Shielding and Status LEDs
The integrated metal shield incorporates perimeter EMI grounding tabs that establish contact with the front panel cutout. Green and Yellow status LEDs provide visual indication of link status and network activity directly at the connector interface.
Architecture Comparison: 10/100 MagJack vs. Alternative Implementations
| Evaluation Metric | LPJ1014AHNL 10/100BASE-T MagJack |
Gigabit 1000BASE-T MagJack |
Discrete 10/100 Magnetics + Non-Magnetic Jack |
|---|---|---|---|
| Ethernet Data Rate | 10/100BASE-T (Fast Ethernet) | 10/100/1000BASE-T (Gigabit) | Depends on discrete transformer |
| Magnetics Architecture | Integrated 4-Core Magnetics | Integrated 8-Core or 12-Core | Separate discrete magnetic module on PCB |
| Active Twisted Pairs | 2 Pairs (TX / RX) | 4 Pairs (Full Duplex) | 2 Pairs (10/100) |
| PCB Component Count | Reduced — consolidates jack, magnetics, LEDs | Reduced | Higher — multiple discrete placements required |
| Shielding Style | Metal shield with EMI tabs | Typically with EMI tabs | Varies by connector selection |
| Primary Advantage | Cost-effective integrated Fast Ethernet I/O | Higher Gigabit throughput | Independent layout of transformer module |
Application Considerations for LPJ1014AHNL
| Target Application Profile | Potential Plating Option | Primary Engineering Consideration |
|---|---|---|
| Smart Cameras & Vision Systems | Gold 15µ" | Reliable 10/100BASE-T Fast Ethernet connectivity, integrated status LEDs, and perimeter EMI tabs for panel bonding. |
| Game Hardware & Multi-Media Controllers | Gold 6µ" / 15µ" | Standard 25.25 mm package length, low component count, and standard 0°C to +70°C commercial operating range. |
| Solar Inverters & Energy Data Gateways | Gold 15µ" / 30µ" | Stable physical-layer isolation, T-Post mechanical PCB anchoring against vibration. |
| Embedded Routers & Modems | Gold 6µ" / 15µ" | Consolidates physical-layer magnetics and termination into a small footprint, simplifying board routing. |
Engineering Verification Checklist
Before releasing a PCB layout or finalizing a bill of materials (BOM) using the LPJ1014AHNL, hardware engineers should confirm the following design parameters against the official product drawing:
- Package Dimensions & Clearances: Verify the 13.45 mm height, 25.25 mm length, and 16.15 mm width against internal enclosure clearances.
- Pinout and Schematic Alignment: Verify the terminal numbering, center-tap connections, and differential-pair assignments against the official product drawing and selected PHY reference design.
- Tab-Up Latch Clearance: Ensure adequate clearance above the front-panel cutout for RJ45 plug latch disengagement during maintenance.
- PCB Land Pattern: Check through-hole pad diameters, T-Post hole locations, and shield ground pin drill sizes on the manufacturer's footprint drawing.
- EMI Tab Contact Geometry: Confirm front-panel cutout dimensions ensure continuous mechanical contact with the shield EMI spring tabs.
- LED Drive Circuitry: Implement suitable series current-limiting resistors and drive circuits on the host PCB matched to the selected PHY.
- Thermal Operating Environment: Validate that the component operating environment remains within the specified 0°C to +70°C range.
Frequently Asked Questions
Is the LINK-PP LPJ1014AHNL a compatible alternative to the Belfuse SI-50154-F?
The LPJ1014AHNL is designed as a compatible alternative to the Belfuse SI-50154-F with a single-port 10/100BASE-T MagJack configuration, Tab-Up latch, 25.25 mm package length, 8P8C pinout, Green/Yellow LEDs, T-Post PCB retention, and metal shield with EMI tabs. Engineers should verify the mechanical drawing, pin assignments, and PCB land pattern before production use.
What is the function of the 4-core magnetic design?
The 4-core magnetic structure provides isolation transformers and common-mode chokes for the two differential pairs (transmit and receive) used in 10/100BASE-T Fast Ethernet, providing physical-layer signal coupling and common-mode noise filtering.
What mechanical advantage does the Tab-Up latch orientation offer?
The Tab-Up latch orientation places the plug release latch on the top of the connector. This provides easy finger access when the connector is mounted along the bottom edge of a printed circuit board or near the base of an enclosure.
What role do the integrated EMI shielding tabs play?
The perimeter EMI tabs act as spring-finger contacts that press against the metal front panel or bezel cutout, establishing a low-impedance ground connection to the chassis to support the equipment's overall shielding and EMC strategy.
Is the LPJ1014AHNL suitable for Power over Ethernet (PoE)?
No. The LPJ1014AHNL is specified as a Non-PoE connector for data-only Fast Ethernet interfaces. For systems requiring PoE power delivery, a MagJack with dedicated PoE-rated magnetics and DC current paths should be selected.
What contact plating options are available for the LPJ1014AHNL?
The LPJ1014AHNL is available with 6 micro-inch, 15 micro-inch, or 30 micro-inch gold plating options at the contact mating area. Selection should be evaluated based on the expected mating cycles, operating environment, and application durability requirements.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Download
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































