LU1S114 Compatible LINK-PP LPJ0120DNL 10/100 Base-T Tab Down Without Led 1 Port Cat5 8P8C Modular Connector Jacks
P/N:
LPJ0120DNL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJ0120DNL
- Number of Ports: 1X1
- Speed: 10Base-T,100Base-TX
- PoE: Non-PoE
- Latch: Down
- Mounting Type: THT
- LED Option: No LEDs
- Shield EMI Tabs: NO
- Temperature: 0℃ to 70℃
- P/N: LPJ0120DNL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LU1S114
Packaging Details:
N.W/pCS:
0.007kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1200pcs
Carton size:
32*30*31cm
G.W/carton:
8.5kg
Product Specifications
| LINK-PP Part Number: | LPJ0120DNL | Bothhand Part Number | LU1S114 |
| Part Status | Active | Connector Type | RJ45 MagJack (Integrated Magnetics) |
| Number of Positions/Contacts | 8P8C (RJ45, Ethernet) | Application-LAN | Ethernet (Non-PoE) |
| Number of Ports | 1×1 Port | Speed | 10/100BASE-T |
| Latch | Tab-Down | Cores per Port | 4 |
| Orientation | 90° Right Angle | PCB Mount Angle | Side Entry |
| Shield EMI Tabs | Without | LED Option | Without |
| PCB | FR4 | PCB Retaining Post | T-Post |
| Package Height (Inches/mm) | 0.528 / 13.40 | Package Length (Inches/mm) | 0.839 / 21.30 |
| Package Width (Inches/mm) | 0.630 / 16.00 | Operating Temperature | 0°C to +70°C |
| BST Circuit | Yes | AutoMDX | Yes |
| Diodes | No | Contact Mating Area Plating | Gold 6µ" / 15µ" / 30µ" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T, C |
Single-Port 10/100BASE-T RJ45 MagJack
The LINK-PP LPJ0120DNL is a single-port 10/100BASE-T Fast Ethernet RJ45 MagJack in a right-angle, side-entry through-hole configuration. The Ethernet interface incorporates an internal 4-core magnetic structure with a 1CT:1CT turns ratio and T, C configuration. The connector also includes Bob Smith termination (BST), AutoMDX support, an unilluminated (LED-free) front face, and a specified operating temperature range of 0°C to +70°C.
The mechanical package features a housing height of 13.40 mm (0.528 inches), a length of 21.30 mm (0.839 inches), and a width of 16.00 mm (0.630 inches). Designed with an 8P8C interface, Tab-Down latch orientation, a smooth metal shield without external EMI tabs, and molded T-Posts for PCB retention, the LPJ0120DNL provides a compact board-level Ethernet interface for solar inverters, digital cameras, fieldbus gateways with Ethernet interfaces, and gaming devices.
Compatibility and Design Positioning
The LINK-PP LPJ0120DNL is positioned as a cross-reference and alternative sourcing option for the Bothhand LU1S114 single-port 10/100BASE-T RJ45 MagJack. It provides a comparable 1×1 port architecture, 10/100BASE-T interface, 1CT:1CT turns ratio, 4-core-per-port configuration, Tab-Down latch orientation, an unilluminated non-LED front face, and a 0°C to +70°C operating range. Engineering and procurement teams should verify pin assignment, PCB footprint, electrical characteristics, and mechanical dimensions against the applicable official drawings before approving a component substitution.
Procurement and OEM Qualification
For sourcing teams and OEM engineering programs evaluating the LPJ0120DNL as a second-source or BOM alternative, key qualification parameters include PCB mechanical footprint, pinout alignment, electrical characteristics, operating temperature rating, and expected volume demand. LINK-PP can support sample evaluation, mechanical drawing review, and documentation requirements for prototype validation, AVL qualification, and volume production planning. Sourcing teams should verify lead-time requirements, applicable packaging requirements, and contact plating selection (6µ", 15µ", or 30µ") based on project lifecycle demands.
Tab-Down Latch Topology and Enclosure Front-Panel Optimization
Integrating Fast Ethernet magnetics into a Tab-Down RJ45 connector assembly provides practical packaging and mechanical layout considerations for embedded hardware:
- Tab-Down Latch Orientation: The RJ45 plug release latch is positioned on the lower side of the port. Board and enclosure designers should provide sufficient clearance beneath the connector for plug insertion, latch engagement, and cable removal.
- 13.40 mm Vertical Height: The 13.40 mm (0.528 inches) housing height supports space-constrained board-edge and embedded hardware designs where enclosure clearance is limited.
- 0°C to +70°C Operating Range: The 0°C to +70°C specification defines the stated operating temperature range of the connector assembly. Final system qualification should consider the expected internal equipment temperature together with the PHY, PCB, enclosure, and airflow conditions.
- Shield Without External EMI Tabs: The connector uses a metal shield without external EMI tabs. Enclosure designers should verify the shield profile, front-panel cutout, PCB shield connections, and mechanical clearances against the official product drawing.
- Mechanical T-Post Retention: Molded plastic T-Posts help locate and mechanically retain the connector on the host PCB during assembly and field operation.
Internal Magnetics Architecture, 10/100BASE-T Signaling, and AutoMDX
The Ethernet port incorporates an internal 4-core magnetic structure with a 1CT:1CT turns ratio and T, C configuration. The integrated magnetics provide the electrical interface between the Ethernet PHY and the cable-side RJ45 connection while reducing the need for separate discrete magnetic components on the host board.
The connector includes a Bob Smith termination (BST) circuit and is specified for Ethernet interfaces supporting AutoMDX operation. Hardware designers should evaluate the MagJack together with the selected PHY reference design, differential-pair routing, PCB grounding, and system-level EMC requirements. The LPJ0120DNL is specified for non-PoE Ethernet applications.
Mechanical Envelope and PCB Layout Considerations
When integrating the LPJ0120DNL into host hardware layouts, engineering teams should observe the following structural and layout parameters:
1. Package Dimensions and Front-Panel Cutout
The connector body measures 13.40 mm (0.528 inches) in height, 21.30 mm (0.839 inches) in length, and 16.00 mm (0.630 inches) in width. Front-panel openings should provide appropriate clearance for the connector shield profile and cable plug latch operation.
2. Tab-Down Latch Headroom and Servicing
Because the release latch is oriented on the bottom face, designers should provide adequate clearance beneath the connector port to ensure field technicians can easily depress the plug latch during servicing.
3. 8P8C Interface and PCB Footprint
The LPJ0120DNL provides an 8P8C RJ45 Ethernet interface in a through-hole connector configuration without integrated status LEDs. Designers should use the official product drawing to verify terminal numbering, drill-hole diameters, T-Post locations, shield connections, PCB land pattern, and required copper keep-out and clearance dimensions before releasing the footprint.
4. Shield and Chassis Grounding Integration
The connector features a metal shield without external EMI tabs. System designers should evaluate shield-pin connections, enclosure geometry, and chassis-ground strategy as part of the complete system-level EMC design.
Design Consideration Comparison: Integrated MagJack vs. Discrete Solution
| Design Consideration | LPJ0120DNL Integrated Tab-Down MagJack |
Discrete 10/100 Magnetics + Modular RJ45 Jack |
|---|---|---|
| Component Integration | Magnetics and RJ45 connector integrated in one housing | Separate magnetics and RJ45 connector components |
| PCB Assembly | Single integrated connector assembly | Separate magnetics and RJ45 connector components |
| Connector Selection | Integrated RJ45 port geometry | Flexible external connector selection |
| Board-Edge Layout | Consolidated footprint at board edge | Requires trace routing between discrete magnetics and connector |
| Vertical Height Envelope | Fixed 13.40 mm profile | Model-dependent |
| Front-Panel Shielding | Integrated metal shield without external EMI tabs | Dependent on chosen external RJ45 shield design |
| Primary Engineering Focus | Consolidated 10/100BASE-T interface and integrated connector architecture | Independent component placement and routing flexibility, depending on the selected implementation |
Application Considerations for LPJ0120DNL
| Target Application Profile | Primary Engineering Consideration |
|---|---|
| Solar Inverters & Energy Monitoring | Integrated 10/100BASE-T magnetics and BST circuitry provide a consolidated physical interface for network-enabled power management units. |
| Digital Cameras & Vision Equipment | Tab-Down latch orientation supports compact board-edge layouts where top-panel clearance is limited by optical or display bezels. |
| Fieldbus Gateways with Ethernet Interfaces | Integrated 10/100BASE-T magnetics provide a consolidated Ethernet physical interface for gateway hardware operating within the specified 0°C to +70°C temperature range. |
| Game Controllers & Dedicated Terminals | The LED-free connector configuration can be considered for systems that use separate board-level or front-panel status indicators. |
Engineering Verification Checklist
Before releasing a PCB layout or finalizing a bill of materials using the LPJ0120DNL, hardware engineers should confirm the following design parameters against official documentation:
- Footprint and Pinout Verification: Verify the 8P8C signal pin layout, T-Post drill sizes, and shield pin locations against the official LINK-PP LPJ0120DNL drawing.
- Tab-Down Headroom Clearance: Confirm that the enclosure cutout provides sufficient vertical clearance beneath the port for cable plug latch engagement and release.
- Unilluminated Configuration: Confirm that the schematic symbol and PCB footprint match the LED-free LPJ0120DNL configuration shown in the official product drawing.
- Shield and Chassis Grounding: Verify the connector shield-pin implementation against the host system grounding, enclosure, and EMC design requirements.
- PHY Magnetics Compatibility: Confirm that the 1CT:1CT turns ratio and BST termination topology align with the transceiver manufacturer's reference schematic.
- Thermal Environment: Ensure that the operating environment inside the equipment chassis remains within the specified 0°C to +70°C commercial temperature range.
Frequently Asked Questions
What are the primary specifications of the LINK-PP LPJ0120DNL?
The LPJ0120DNL is a single-port 10/100BASE-T non-PoE Ethernet RJ45 MagJack. It features an 8P8C interface, 4-core integrated magnetics, a 1CT:1CT turns ratio, Tab-Down latch orientation, side-entry through-hole mounting, an unilluminated (Without LEDs) design, a metal shield without external EMI tabs, an integrated BST circuit, AutoMDX support, and a specified operating temperature range of 0°C to +70°C.
Is the LINK-PP LPJ0120DNL compatible with the Bothhand LU1S114?
The LPJ0120DNL is positioned as a cross-reference and alternative sourcing option for the Bothhand LU1S114 single-port 10/100BASE-T RJ45 MagJack. It provides a comparable 1×1 port architecture, 10/100BASE-T interface, 1CT:1CT turns ratio, 4-core-per-port configuration, Tab-Down latch orientation, unilluminated design, and 0°C to +70°C operating range. Engineering and procurement teams should verify pin assignment, PCB footprint, electrical characteristics, and mechanical dimensions against the applicable official drawings before approving a component substitution.
What are the design considerations for a Tab-Down latch orientation?
A Tab-Down orientation positions the RJ45 plug release latch on the underside of the connector. Board and enclosure designers should verify sufficient clearance beneath the port for plug insertion, latch engagement, and cable removal against the applicable mechanical drawing.
What does the unilluminated (LED-free) configuration mean?
The LPJ0120DNL is specified without integrated status LEDs in the RJ45 connector housing. This configuration can be considered for equipment that uses separate board-level or front-panel indicators. Engineers should refer to the official product drawing and schematic to verify the connector pin configuration and PCB footprint.
What is the function of the internal 4-core magnetics architecture?
The LPJ0120DNL specifies a 4-core integrated magnetic structure for its 10/100BASE-T Ethernet interface, with a 1CT:1CT turns ratio and T, C configuration. The integrated magnetics provide the electrical interface between the Ethernet PHY and the cable-side RJ45 connection. Engineers should refer to the applicable LINK-PP schematic and electrical documentation for the exact magnetic topology and termination arrangement.
Does the LPJ0120DNL support Power over Ethernet (PoE)?
No. The LPJ0120DNL is specified as a non-PoE Ethernet data interface. For applications requiring PoE power delivery, a connector and magnetics solution specifically rated for the required IEEE 802.3 PoE standard and DC current conditions should be selected.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































