Halo HFJ11-S101E-S1LS21RL Compatible LINK-PP LPJ0215AANL 10 Base-TX RJ45 Magjack Connector Single Port
P/N:
LPJ0215AANL
Manufacturer:
LINK-PP
Compatible Brand:
Halo
Compatible P/N:
LPJ0215AANL
- Compatible Brands: Halo
- Number of Ports: 1X1
- Speed: 10Base-T
- PoE: Non-PoE
- Latch: Down
- Mounting Type: THT
- LED Option: Yellow / Green
- Shield EMI Tabs: YES
- Temperature: 0℃ to 70℃
- P/N: LPJ0215AANL
- Manufacturer: LINK-PP
- Compatible Brand: Halo
- Compatible P/N: HFJ11-S101E-S1LS21RL
Packaging Details:
N.W/pCS:
0.007kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1200pcs
Carton size:
32*30*31cm
G.W/carton:
8.5kg
Product Specifications
| LINK-PP Part Number | LPJ0215AANL | Halo Part Number | HFJ11-S101E-S1LS21RL |
| Part Status | Active | Connector Type | Jack |
| Number of Positions/Contacts | 8p8c (RJ45, Ethernet) | Application-Lan | Ethernet(Non PoE) |
| Number of Ports | 1x1 Port | Speed | 10 Base-TX |
| Latch | Down | Cores per Port | 4 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | SIDE ENTRY |
| Shield EMI Tabs | With | LED Option | Yellow/Green |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.528/13.40 | Package Length (Inches/mm) | 0.839/21.30 |
| Package Width (Inches/mm) | 0.626/15.90 | Temperature | 0 TO 70℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
Halo HFJ11-S101E-S1LS21RL Compatible LINK-PP LPJ0215AANL 10BASE-T RJ45 Magjack Technical Overview
The LINK-PP LPJ0215AANL (engineered as a direct 100% pin-to-pin drop-in replacement for Halo Electronics HFJ11-S101E-S1LS21RL) is a single-port (1x1) Tab-Down female RJ45 Integrated Connector Module (ICM) with built-in 10Base-TX Ethernet magnetics, Yellow/Green status LEDs, EMI shield tabs, and a Bob Smith Termination (BST) circuit. Compliant with IEEE 802.3 standards, it integrates a 4-core transformer/choke matrix (1CT:1CT turns ratio, 350µH OCL min), delivering 10 Mbps Ethernet signal isolation, 1500Vrms Hi-Pot protection, and 360-degree panel grounding for smart utility meters, security monitoring systems, LAN-on-Motherboard (LOM), and SOHO switches.
- 10BASE-T Magnetics Architecture: 8p8c RJ45 connector integrated with a 4-core magnetic matrix (1CT:1CT turns ratio, 350µH min OCL) supporting 10 Mbps communication over Cat3/Cat5 wiring.
- Chassis EMI Grounding & Tab-Down Geometry: Side-entry right-angle through-hole mounting with a Tab-Down mechanical latch, T-Post PCB retention, Yellow/Green status LEDs, and front EMI spring tabs for continuous panel bezel grounding.
- Built-In Circuit Protection & Noise Rejection: Features an integrated Bob Smith Termination (BST) network and Auto-MDIX logic for enhanced common-mode EMI suppression and automatic cable crossover detection.
- Direct Cross-Reference Replacement: Fully qualified footprint and electrical drop-in replacement for Halo Electronics HFJ11-S101E-S1LS21RL for BOM cost optimization and secondary sourcing.
LINK-PP LPJ0215AANL 10BASE-T Female RJ45 Magjack Connector Overview
LINK-PP LPJ0215AANL is a right-angle side-entry 1x1 Tab-Down female RJ45 integrated connector module (ICM) designed for non-PoE 10BASE-T Ethernet networking platforms. Housing signal transformers, common-mode chokes, Yellow/Green visual status LEDs, and Bob Smith Termination directly inside a metal-shielded jack with EMI spring tabs, this connector simplifies motherboard layout by replacing discrete PHY magnetics. It provides a highly reliable, pin-compatible secondary-source alternative to Halo Electronics HFJ11-S101E-S1LS21RL in smart grid utility meters, security monitoring gateways, SOHO routers, and industrial control cards.
Key Benefits of LINK-PP LPJ0215AANL / Halo HFJ11-S101E-S1LS21RL Compatible Magjack
- Fully Integrated Magjack ICM Architecture (Reduces SMT Component Count): Consolidates discrete isolation transformers, common-mode chokes, resistors, and capacitors inside the RJ45 jack, reducing motherboard component count and SMT placement cycles.
- 10BASE-T Ethernet Performance (IEEE 802.3 Compliant): Embeds a 4-core transformer and common-mode choke matrix (350µH OCL min) that isolates and filters transmit/receive lines, ensuring clean 10 Mbps eye diagrams with minimal differential insertion loss.
- Tab-Down Mechanical Latch & EMI Shield Spring Tabs: Tab-Down mechanical latch orientation aligns with standard front-panel enclosures, while EMI spring tabs on the metal shield frame press against chassis cutouts to suppress radiated emissions.
- Integrated Yellow/Green Visual Status LEDs: Built-in LED indicators provide clear visual diagnostics for Ethernet link establishment, port speed, and data activity status.
- Integrated Bob Smith Termination (BST) & Auto-MDIX: Built-in 75-ohm BST circuit routes common-mode EMI noise and ESD transients safely to ground, while Auto-MDIX logic supports automatic straight-through or crossover cable detection.
- Direct Second Sourcing for Halo Electronics HFJ11-S101E-S1LS21RL: Identical 8p8c through-hole PCB land pattern and pinout allow seamless drop-in secondary sourcing to reduce procurement lead times.
Integrated Magnetics & 10BASE-T Signal Architecture
The LINK-PP LPJ0215AANL utilizes an advanced Integrated Connector Module (ICM) architecture that embeds 10BASE-T magnetics directly behind the 8p8c contact pins, eliminating high-frequency noise radiation caused by long trace runs on the motherboard.
4-Core 10BASE-T Transformer & Choke Configuration
Featuring a 1CT:1CT transmit and receive turns ratio with 4 magnetic cores per port and 350µH minimum open-circuit inductance (OCL), the LPJ0215AANL establishes 1500Vrms galvanic isolation between the Ethernet PHY transceiver chip and the external network cable. The 4-core layout provides precise impedance matching across transmit and receive differential pairs, suppressing inter-channel crosstalk and common-mode noise.
Bob Smith Termination (BST) & ESD Rejection
The integrated Bob Smith Termination (BST) network utilizes high-voltage capacitors and precision resistors to balance line impedance on unused cable pairs. This prevents common-mode noise reflection, reduces radiated EMI emissions, and enhances system ESD immunity during cable plugging.
PCB Mounting & Mechanical Specifications
Designed for automated Through-Hole Technology (THT) assembly, the LPJ0215AANL incorporates robust mechanical features to ensure structural integrity on FR4 substrates.
Tab-Down Latch Geometry & EMI Shield Tabs
With package dimensions of 13.40mm H x 21.30mm L x 15.90mm W, the LPJ0215AANL provides a compact footprint. Integrated Yellow/Green LEDs provide clear visual link status and data activity diagnostics, while T-Post mechanical pegs anchor the housing firmly to the motherboard during cable plugging.
Target Applications: Smart Meters, Monitoring Systems, and SOHO Hubs
Combining IEEE 802.3 10BASE-T speed, BST noise suppression, EMI shield tabs, and Halo HFJ11-S101E-S1LS21RL compatibility, the LINK-PP LPJ0215AANL supports diverse embedded systems:
- Smart Grid Utility Meters & AMR Data Concentrators: Ideal for electric/gas metering infrastructure, smart grid AMR gateways, and power quality monitoring units.
- Security Monitoring Systems & Surveillance Gateways: Deployed in security NVRs, smart camera controllers, and video monitoring gateways.
- SOHO Routers, Network Switches, & LAN-on-Motherboard: Suitable for commercial Wi-Fi routers, desktop Ethernet switches, and single-board computers (SBCs).
How to Select and Verify LPJ0215AANL vs. Halo HFJ11-S101E-S1LS21RL
Hardware design engineers and procurement specialists evaluating the LINK-PP LPJ0215AANL as a second-source replacement for Halo Electronics HFJ11-S101E-S1LS21RL should verify the following core parameters:
- 4-Core Magnetics & OCL Compatibility: Confirm that a 4-core magnetic matrix (350µH min OCL) and a 1CT:1CT turns ratio match your 10BASE-T PHY transceiver reference design.
- Mechanical Latch & Footprint Alignment: Verify that the Tab-Down latch direction, 8p8c through-hole pin arrangement, and T-Post peg locations match the HFJ11-S101E-S1LS21RL PCB land pattern.
- LED Option & Driving Polarity: Confirm that the Yellow/Green LED configuration and pin polarity match your host SMT LED driving circuit.
- Package Height & EMI Tab Clearance: Ensure that the 13.40mm package height and external EMI spring tabs fit within your front-panel bezel window.
Frequently Asked Questions
Is LINK-PP LPJ0215AANL a direct drop-in replacement for Halo HFJ11-S101E-S1LS21RL, and what are the BOM cost advantages?
Yes. LINK-PP LPJ0215AANL is engineered as a 100% mechanical, electrical, and footprint drop-in replacement for Halo Electronics HFJ11-S101E-S1LS21RL. Sourcing managers can achieve 30% to 50% BOM cost savings without requiring PCB re-layout or front-panel enclosure modifications. Standard production lead time is 2 to 3 weeks compared to 12-20 weeks for tier-1 OEMs. Contact our sales team for instant cross-reference verification, 3D STEP models, and tiered volume pricing.
What key mechanical and electrical parameters must design engineers verify before dropping in this 10BASE-T connector?
Design engineers should verify four core parameters: 1) 4-core 10BASE-T magnetics layout with 1CT:1CT turns ratio and 350µH minimum OCL; 2) Tab-Down mechanical latch orientation and 13.40mm package height; 3) Yellow/Green LED configuration and pin driving polarity; and 4) Shield EMI spring tabs clearance with front-panel bezel windows. Complete 3D STEP models and Cadence/Altium PCB footprints (.PcbLib) are available for CAD design-in verification.
What quality certifications, environmental compliance, and manufacturing standards does LINK-PP provide?
LINK-PP LPJ0215AANL is manufactured in ISO9001:2008 and ISO14001 certified facilities and complies fully with UL, RoHS, REACH, and SGS standards. Every connector undergoes 100% automated electrical testing, including 1500Vrms Hi-Pot dielectric isolation, 350µH OCL inductance verification, and optical LED testing before shipment to ensure zero-defect line assembly on your production floor.
How does LPJ0215AANL ensure electrical reliability and EMI protection in commercial environments?
Rated for an operating temperature range of 0°C to +70°C, the LPJ0215AANL utilizes high-temperature thermoplastic housings, gold-plated contacts (6u", 15u", or 30u" options), and a full metal shield. The built-in 75-ohm Bob Smith Termination (BST) circuit and external EMI spring tabs provide a continuous low-impedance ground loop to suppress radiated emissions and protect host Ethernet PHY chips against ESD transients.
How can procurement teams request free samples, datasheets, and lead time estimates for LPJ0215AANL?
LINK-PP offers free sample kits for qualified engineering and procurement teams for prototype testing and First Article Inspection (FAI). We maintain ready-to-ship buffer stock for common parts and offer flexible MOQs for low-volume trial runs. Click "Request Free Sample" or contact our sourcing specialists today to receive official engineering drawings, qualification reports, and formal price quotations within 24 hours.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































