HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJ0011GDNL (1).jpg
  • LPJ0011GDNL (4).jpg
  • LPJ0011GDNL (5).jpg
  • LPJ0011GDNL (2).jpg
  • LPJ0011GDNL (3).jpg

Halo HFJ11-2450E-L21V3 Compatible LINK-PP LPJ0011GDNL 10/100 Base-T Tab Down Yellow/Green Led 1 Port 8P8C Ethernet Isolation Modules

P/N:

LPJ0011GDNL

Manufacturer:

LINK-PP

Compatible Brand:

Halo

Compatible P/N:

LPJ0011GDNL

  • Compatible Brands: Halo
  • Number of Ports: 1X1
  • Speed: 10Base-T,100Base-TX
  • PoE: Non-PoE
  • Latch: Down
  • Mounting Type: THT
  • LED Option: Yellow / Green
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJ0011GDNL
  • Manufacturer: LINK-PP
  • Compatible Brand: Halo
  • Compatible P/N: HFJ11-2450E-L21V3

Packaging Details:

N.W/pCS:

0.007kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1200pcs

Carton size:

32*30*31cm

G.W/carton:

8.5kg

Product Specifications

LINK-PP Part Number LPJ0011GDNL Halo Part Number Equivalent HFJ11-2450E-L21V3
Connector Type RJ45 MagJack (Integrated Magnetics) Part Status Active
Number of Positions/Contacts 8P8C (RJ45, Ethernet) Application-LAN Ethernet (Non-PoE)
Number of Ports Single Port (1×1) Speed 10/100BASE-T
Latch Orientation Down (Tab-Down) Cores per Port 4
Orientation 90° Angle (Right) PCB Mount Angle Side Entry (Through Hole)
Shield EMI Tabs With EMI Tabs LED Option Yellow / Green
PCB Material FR4 PCB Retaining Post T-Post
Package Height (Inches/mm) 0.524 / 13.30 Package Length (Inches/mm) 0.837 / 21.25
Package Width (Inches/mm) 0.627 / 15.93 Operating Temperature 0°C to +70°C (Commercial)
BST Circuit Yes AutoMDX Yes
Diodes No Contact Mating Area Plating Gold 6µ" / 15µ" / 30µ"
Turns Ratio (RX/TX) 1CT:1CT Configuration (RX/TX) T, C

Single-Port 10/100BASE-T Fast Ethernet RJ45 MagJack (Tab-Down, Side Entry)

The LINK-PP LPJ0011GDNL is a single-port 10/100BASE-T Fast Ethernet RJ45 integrated connector module (MagJack) engineered in a right-angle, side-entry through-hole package with a Tab-Down latch profile. For hardware design engineers, it consolidates a 4-core magnetic architecture, 1CT:1CT turns ratio, integrated Bob Smith termination (BST), AutoMDX support, and distinct Yellow/Green status LEDs to ensure full IEEE 802.3 compliance and robust signal integrity. For procurement and sourcing teams, the LPJ0011GDNL serves as a direct, form-fit-function cross-reference to the Halo HFJ11-2450E-L21V3, offering active production status, multiple gold plating options (6µ", 15µ", or 30µ"), and AVL diversification to safeguard against supply chain interruptions. For OEM system integrators, the compact 13.30 mm package height, perimeter shield EMI tabs, and molded T-Post PCB anchors deliver mechanical stability and clean front-panel alignment across network firewalls, digital cameras, smart home hubs, entrance guard systems, and server appliances.

Operating across a commercial temperature range of 0°C to +70°C, the LPJ0011GDNL provides dedicated non-PoE Fast Ethernet connectivity. Hardware engineering teams should review the mechanical drawings, PCB drill land patterns, LED forward voltage ratings, and PHY transceiver guidelines before issuing production release.

Ethernet Speed: Single-Port 10/100BASE-T
Latch Orientation: Tab-Down (Bottom Latch)
Direct Cross Reference: Halo HFJ11-2450E-L21V3
Magnetics Architecture: 4-Core Integrated Design
Shield Configuration: Metal Shield (With EMI Tabs)
Operating Temperature: 0°C to +70°C Commercial

Compatibility and Design Positioning

The LINK-PP LPJ0011GDNL is designed as an electrically and mechanically aligned equivalent to the Halo HFJ11-2450E-L21V3. Both connectors feature an 8P8C single-port footprint, side-entry through-hole termination, Tab-Down latching, 1CT:1CT turns ratio on transmit and receive channels, integrated BST circuits, and Yellow/Green LED indication. Hardware design and procurement teams evaluating second-source qualification or cost-optimization initiatives can integrate the LPJ0011GDNL directly into existing PCB layouts. Engineers should verify terminal pin mapping, T-Post hole locations, and panel bezel cutout tolerances against the official LINK-PP mechanical drawing to confirm seamless replacement.

Tab-Down Latch Topology and Enclosure Front-Panel Optimization

Choosing a Tab-Down RJ45 connector topology provides distinct advantages for specific mechanical enclosures, panel bezels, and user ergonomics:

  • Ergonomic Latch Clearance: The Tab-Down latch orientation positions the release tab toward the bottom of the connector, preventing interference with enclosure bezels, overhangs, or stacked upper components during cable disconnection.
  • Low 13.30 mm Height Envelope: The 13.30 mm vertical height supports compact 1U chassis, low-profile security gateways, and slim camera housings where vertical PCB clearance is strictly restricted.
  • Perimeter EMI Spring Tabs: Integrated ground spring tabs ensure continuous electrical contact with the chassis front panel, minimizing electromagnetic emissions and increasing electrostatic discharge (ESD) immunity.
  • Mechanical T-Post Retention: Molded T-Posts anchor the housing securely to the FR4 substrate, absorbing insertion, extraction, and cable pull forces to prevent stress cracking on electrical solder joints.

Integrated 4-Core Fast Ethernet Magnetics and AutoMDX Support

The LPJ0011GDNL Ethernet interface integrates a 4-core magnetic structure (two cores for the transmit pair and two cores for the receive pair) with a symmetrical 1CT:1CT turns ratio and T, C configuration. This architecture matches industry-standard 10/100BASE-T physical layer transceivers (PHYs) operating in either current-mode or voltage-mode configurations.

The integrated Bob Smith termination (BST) circuit damps common-mode resonances and provides a 75Ω termination network paired with high-voltage decoupling, suppressing radiated emissions and absorbing cable-discharge transients. Full AutoMDX support enables automatic transmit/receive line swapping, while IEEE 802.3-compliant galvanic isolation shields host circuitry from line-side electrical disturbances.

Mechanical Envelope and PCB Layout Considerations

When integrating the LPJ0011GDNL into high-reliability hardware platforms, engineers should account for the following mechanical and layout parameters:

1. Package Dimensions and Front-Panel Cutout

The connector envelope measures 13.30 mm (0.524 inches) in height, 21.25 mm (0.837 inches) in length, and 15.93 mm (0.627 inches) in width. Front-panel cutouts should accommodate the body envelope while ensuring uniform spring deflection on all perimeter EMI tabs.

2. Tab-Down Latch Clearance and Mating Ergonomics

Because the release latch is positioned on the bottom edge, designers must ensure sufficient clearance between the connector bottom and any protruding enclosure lip or PCB edge to allow unhindered thumb access for RJ45 plug extraction.

3. Through-Hole T-Post Anchoring

The molded plastic T-Posts provide positive PCB location and structural anchoring. Drill holes for these retention posts should adhere to specified tolerances on the manufacturing drawing to maintain connector perpendicularity during wave or selective soldering.

4. EMI Shielding and Status LEDs

The exterior metal shield features grounding pins that must tie directly to chassis ground on the host PCB. Separate Yellow and Green LED through-hole pins interface with the host PHY driver; series current-limiting resistors should be sized to meet target forward current and brightness levels.

Architecture Comparison: Single-Port MagJack vs. Alternative Implementations

Evaluation Metric LPJ0011GDNL
Tab-Down Integrated MagJack
Discrete Magnetics +
Modular RJ45 Jack
Tab-Up Integrated
RJ45 MagJack
Component Architecture Integrated (Magnetics + Jack) Separate (Transformer + Jack) Integrated (Magnetics + Jack)
Latch Orientation Tab-Down (Bottom Latch) Typically Tab-Down or Tab-Up Tab-Up (Top Latch)
SMT/THT Placements Single connector placement Two placements required Single connector placement
Board-Edge Footprint 15.93 mm width consolidated Extended (Routing between chips) Comparable ~16.00 mm width
Chassis Cutout Optimization Clearance for top bezels Connector-dependent Clearance for bottom bezels
Primary Design Focus Front-panel Fast Ethernet consolidation Modular routing flexibility Alternative ergonomic profile

Application Considerations for LPJ0011GDNL

Target Application Profile Primary Engineering Consideration
Network Firewalls & VPN Routers Consolidates 10/100 magnetics, status LEDs, and EMI shielding into a compact 13.30 mm package for dense front panels.
Digital Cameras & IP Surveillance Tab-Down orientation provides ergonomic cable disconnection in tight camera enclosures and outdoor dome housings.
Smart Home Hubs & IoT Gateways Active lifecycle and multi-sourcing support provide cost efficiency and long-term procurement stability.
Entrance Guard & Access Control Terminals Integrated Bob Smith termination and robust metal shielding protect against ESD in wall-mounted access interfaces.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing procurement for the LPJ0011GDNL, hardware engineers should confirm the following technical factors:

  • Footprint and Pinout Verification: Verify the 8P8C signal pin layout, T-Post hole diameters, and shield ground pin drill locations against the official LINK-PP LPJ0011GDNL mechanical drawing.
  • Cross-Reference Validation: Confirm pin-for-pin and dimension compatibility against the Halo HFJ11-2450E-L21V3 drawing if qualifying as a second source.
  • Front-Panel Latch Access: Check that the chassis cutout allows sufficient vertical clearance below the connector for easy finger access to the Tab-Down latch.
  • LED Polarity and Current Limiting: Confirm host PHY LED driver polarity (common anode vs. common cathode) and calculate series resistor values for the Yellow and Green indicators.
  • Chassis Ground Continuity: Ensure that the perimeter EMI spring tabs make uniform contact with the metallic front-panel cutout without binding during assembly.
  • Operating Thermal Environment: Verify that local ambient conditions inside the system chassis remain within the specified 0°C to +70°C commercial operating window.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LPJ0011GDNL?

The LINK-PP LPJ0011GDNL is a single-port 10/100BASE-T RJ45 MagJack featuring an 8P8C contact arrangement, 4-core internal magnetics, 1CT:1CT turns ratio, Tab-Down latch orientation, side-entry through-hole mounting, Yellow/Green LEDs, integrated BST circuit, AutoMDX support, and an operating temperature range of 0°C to +70°C.

Is the LINK-PP LPJ0011GDNL compatible with the Halo HFJ11-2450E-L21V3?

Yes. The LPJ0011GDNL is engineered as a direct form-fit-function replacement for the Halo HFJ11-2450E-L21V3. Both connectors share identical 8P8C pinouts, 1CT:1CT turns ratios, Tab-Down latch profiles, Yellow/Green LED configurations, and through-hole footprints. Engineers should review official drawings before volume changeovers.

What are the engineering advantages of a Tab-Down latch orientation?

A Tab-Down latch positions the RJ45 plug release latch on the underside of the connector. This orientation prevents interference with top enclosure bezels, display housings, or protruding chassis lips, making it easier for users and field technicians to disconnect Ethernet cables in tight spaces.

What is the function of the internal 4-core magnetics and BST circuit?

The 4-core magnetics provide two isolation transformers and two common-mode chokes for the Fast Ethernet transmit and receive channels, ensuring signal integrity and 1500Vrms isolation. The integrated Bob Smith termination (BST) network damps common-mode energy and provides high-voltage decoupling, helping meet electromagnetic compatibility (EMC) standards.

Is the LPJ0011GDNL suitable for Power over Ethernet (PoE)?

No. The LPJ0011GDNL is specified as a Non-PoE connector. Its internal magnetic components and wiring are designed exclusively for Fast Ethernet differential data communication and galvanic isolation, and cannot carry DC currents defined under IEEE 802.3af/at/bt PoE standards.

What gold plating options are available for the mating contacts?

The LPJ0011GDNL is offered with Gold 6 micro-inch, 15 micro-inch, or 30 micro-inch plating options on the contact mating area. Design teams can select the appropriate gold thickness based on expected mating cycles, operating environment corrosiveness, and target hardware durability requirements.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.