BS-RB10202 Compatible LINK-PP LPJ0085AHNL 10/100 Base-T Tab Down Green/Yellow Led Single Port PoE RJ 45 Ethernet Connection
P/N:
LPJ0085AHNL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJ0085AHNL
- Number of Ports: 1X1
- Speed: 10Base-T,100Base-TX
- PoE: PoE
- Latch: Down
- Mounting Type: THT
- LED Option: Green / Yellow
- Shield EMI Tabs: YES
- Temperature: 0℃ to 70℃
- P/N: LPJ0085AHNL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: BS-RB10202
Packaging Details:
N.W/pCS:
0.007kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1200pcs
Carton size:
32*30*31cm
G.W/carton:
8.5kg
Product Specifications
| LINK-PP Part Number | LPJ0011GDNL | Halo Part Number Equivalent | HFJ11-2450E-L21-RL |
| Connector Type | RJ45 MagJack (Integrated Magnetics) | Part Status | Active |
| Number of Positions/Contacts | 8P8C (RJ45, Ethernet) | Application-LAN | Ethernet (Non-PoE) |
| Number of Ports | Single Port (1×1) | Speed | 10/100BASE-T (Cat5e) |
| Latch Orientation | Down (Tab-Down) | Cores per Port | 4 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | Side Entry (Through Hole) |
| Shield EMI Tabs | With EMI Tabs | LED Option | Yellow / Green |
| PCB Material | FR4 | PCB Retaining Post | T-Post |
| Package Height (Inches/mm) | 0.524 / 13.30 | Package Length (Inches/mm) | 0.837 / 21.25 |
| Package Width (Inches/mm) | 0.627 / 15.93 | Operating Temperature | 0°C to +70°C (Commercial) |
| BST Circuit | Yes | AutoMDX | Yes |
| Diodes | No | Contact Mating Area Plating | Gold 6µ" / 15µ" / 30µ" |
| Turns Ratio (RX/TX) | 1CT:1CT | Configuration (RX/TX) | T, C |
Single-Port 10/100BASE-T Fast Ethernet RJ45 MagJack (Tab-Down, Side Entry)
The LINK-PP LPJ0011GDNL is a single-port 10/100BASE-T Fast Ethernet RJ45 integrated connector module (MagJack) engineered in a right-angle, side-entry through-hole format with a Tab-Down latch configuration. For hardware design engineers, it integrates a 4-core magnetic structure, 1CT:1CT turns ratio, internal Bob Smith termination (BST), AutoMDX support, and Yellow/Green status LEDs to ensure full IEEE 802.3 compliance and stable signal integrity. For procurement and sourcing professionals, the LPJ0011GDNL provides a direct form-fit-function cross-reference to the Halo HFJ11-2450E-L21-RL, supporting active production availability, tailored gold plating options (6µ", 15µ", or 30µ"), and multi-source AVL resilience to safeguard against delivery lead-time fluctuations. For OEM system integrators, its 13.30 mm profile, perimeter shield EMI tabs, and molded T-Post retaining pins facilitate clean chassis grounding and mechanical robustness across switched-mode power supplies (SMPS), building entrance guard terminals, smart home hubs, and commercial networking appliances.
Operating within a commercial temperature range of 0°C to +70°C, the LPJ0011GDNL is dedicated to non-PoE Fast Ethernet communication paths. Hardware design teams should verify the PCB footprint, pinout mapping, LED forward drive currents, and PHY transceiver interface notes against the official LINK-PP mechanical drawing before finalizing volume production layouts.
Compatibility and Design Positioning
The LINK-PP LPJ0011GDNL is positioned as an electrically and mechanically compatible alternative to the Halo HFJ11-2450E-L21-RL. Both connectors share the standard 8P8C pinout, 1CT:1CT turns ratio on transmit and receive channels, Tab-Down mechanical latching, side-entry through-hole profile, and Yellow/Green LED configuration. Sourcing and engineering teams seeking an approved second source or cost-optimized alternative can integrate the LPJ0011GDNL with minimal board-level changes. Engineering teams should cross-reference footprint pad coordinates, T-Post hole diameters, and front-panel cutout dimensions with official LINK-PP technical drawings prior to production release.
Tab-Down Latch Topology and Enclosure Front-Panel Optimization
The Tab-Down connector geometry offers significant layout and packaging benefits for compact devices, power electronics, and wall-mounted systems:
- Ergonomic Latch Clearance: Orienting the latch release tab downward prevents mechanical conflict with upper enclosure bezels, protruding top lips, or tightly stacked daughtercards during cable disconnection.
- Low-Profile 13.30 mm Height: The compact vertical height fits into shallow 1U rack enclosures, DIN-rail communication modules, and low-profile power supply control bays.
- Perimeter EMI Spring Tabs: Surrounding spring tabs create continuous multi-point contact with the metal front panel, suppressing radiated emissions and shunting high-frequency noise away from internal circuitry—a critical feature in noisy SMPS environments.
- Mechanical T-Post Anchoring: Molded T-Posts anchor the housing to the FR4 PCB, absorbing mating insertion and cable pull forces to prevent stress fractures on through-hole solder joints.
Integrated 4-Core Fast Ethernet Magnetics and AutoMDX Support
The LPJ0011GDNL incorporates an internal 4-core magnetic design (two cores for the transmit pair and two cores for the receive pair) in a T, C configuration. With a symmetrical 1CT:1CT turns ratio, the connector provides broad compatibility with standard current-mode and voltage-mode Fast Ethernet PHY transceivers.
An internal Bob Smith termination (BST) network damps common-mode energy and suppresses line-side noise. Full AutoMDX support allows automatic detection and correction of crossed transmit/receive lines without external configuration. Integrated isolation transformers provide IEEE 802.3-compliant galvanic isolation, protecting the host system from cable-induced transients, ground offset voltages, and electrostatic discharge.
Mechanical Envelope and PCB Layout Considerations
When implementing the LPJ0011GDNL in high-reliability applications, layout and mechanical engineers should observe the following guidelines:
1. Package Dimensions and Front-Panel Cutout
The connector body measures 13.30 mm (0.524 inches) in height, 21.25 mm (0.837 inches) in length, and 15.93 mm (0.627 inches) in width. Enclosure openings must be sized to ensure uniform compression of the perimeter EMI spring tabs without mechanical deformation.
2. Tab-Down Latch Clearance and Field Servicing
Because the release latch is positioned on the bottom edge, designers should maintain adequate clearance between the underside of the connector and any protruding enclosure lip or bottom bezel to ensure easy thumb access during field maintenance.
3. Through-Hole T-Post Anchoring
The molded plastic T-Posts provide positive physical retention and alignment on the FR4 PCB. Accurate drill diameters and hole spacing on the host PCB ensure correct vertical positioning and mechanical stress redistribution during repeated cable mating.
4. Shield Grounding and Status LED Routing
The exterior metal shield features dedicated through-hole ground pins that should tie directly to chassis ground with short, low-impedance traces. Yellow and Green LED through-hole terminals interface with the host PHY driver outputs; series current-limiting resistors should be calculated according to target drive voltages and required brightness levels.
Architecture Comparison: Single-Port MagJack vs. Alternative Implementations
| Evaluation Metric | LPJ0011GDNL Tab-Down Integrated MagJack |
Discrete Magnetics + Modular RJ45 Jack |
Tab-Up Integrated RJ45 MagJack |
|---|---|---|---|
| Component Architecture | Integrated (Magnetics + Jack) | Separate (Transformer + Jack) | Integrated (Magnetics + Jack) |
| Latch Orientation | Tab-Down (Bottom Latch) | Design-dependent | Tab-Up (Top Latch) |
| Placement Operations | Single connector assembly | Two individual placements | Single connector assembly |
| Board-Edge Footprint | Consolidated 15.93 mm width | Extended (Inter-chip routing required) | Comparable ~16.00 mm width |
| Chassis Bezel Ergonomics | Clearance for top bezels/overhangs | Connector-dependent | Clearance for bottom bezels |
| Primary Design Focus | Front-panel Fast Ethernet integration | Modular routing flexibility | Standard top-latch preference |
Application Considerations for LPJ0011GDNL
| Target Application Profile | Primary Engineering Consideration |
|---|---|
| Switched-Mode Power Supplies (SMPS) & Power Monitors | Integrated Bob Smith termination and robust perimeter EMI tabs provide noise immunity against high-frequency power switching. |
| Entrance Guard & Building Access Control | Tab-Down orientation facilitates ergonomic cable disconnection in flush-mount wall boxes and security terminals. |
| Smart Home Hubs & Residential Gateways | Compact 13.30 mm height allows low-profile enclosure designs with standardized status LED visibility. |
| Network Switches, Hubs & Embedded Appliances | Direct drop-in compatibility with industry-standard footprints streamlines multi-source procurement. |
Engineering Verification Checklist
Before completing PCB layout or issuing volume purchase orders for the LPJ0011GDNL, hardware engineers should verify the following design parameters:
- Footprint and Pin Assignment: Cross-check the 8P8C signal pin pattern, T-Post hole diameters, and shield ground pin drill locations against the official LINK-PP LPJ0011GDNL product drawing.
- Cross-Reference Validation: Confirm pin-for-pin compatibility and package dimensions against the Halo HFJ11-2450E-L21-RL drawing when qualifying as an alternative sourcing option.
- Chassis Bezel Clearance: Verify that the front-panel cutout provides sufficient clearance beneath the connector for unhindered operation of the Tab-Down RJ45 latch.
- LED Polarity and Drive Circuitry: Confirm host PHY LED driver polarity (common anode vs. common cathode) and implement appropriate current-limiting resistors for the Yellow and Green LEDs.
- Chassis Ground Continuity: Ensure that the front-panel bezel makes uniform contact with the metal shield EMI tabs without mechanical binding.
- Operating Thermal Profile: Verify that the equipment operating environment remains within the specified 0°C to +70°C commercial temperature range.
Frequently Asked Questions
What are the primary specifications of the LINK-PP LPJ0011GDNL?
The LINK-PP LPJ0011GDNL is a single-port 10/100BASE-T Cat5e RJ45 MagJack featuring an 8P8C contact configuration, 4-core internal magnetics, 1CT:1CT turns ratio, Tab-Down latch orientation, side-entry through-hole mounting, Yellow/Green LEDs, integrated BST circuit, AutoMDX support, and an operating temperature range of 0°C to +70°C.
Is the LINK-PP LPJ0011GDNL compatible with the Halo HFJ11-2450E-L21-RL?
Yes. The LPJ0011GDNL is designed as an electrically and mechanically compatible alternative to the Halo HFJ11-2450E-L21-RL. Both connectors share identical 8P8C pinouts, 1CT:1CT turns ratios, Tab-Down latch profiles, Yellow/Green LED arrangements, and through-hole PCB footprints. Engineering teams should cross-check official drawings before production changeovers.
What are the practical advantages of a Tab-Down latch orientation?
A Tab-Down latch positions the RJ45 plug release latch on the bottom of the jack. This prevents mechanical interference with upper enclosure lips, display bezels, or stacked hardware boards, making it easier for technicians and users to depress the release tab and disconnect the cable in tight enclosures.
What is the function of the internal 4-core magnetics and BST circuit?
The 4-core magnetics provide two isolation transformers and two common-mode chokes for the Fast Ethernet transmit and receive channels, ensuring IEEE 802.3 signal integrity and 1500Vrms isolation. The integrated Bob Smith termination (BST) network damps common-mode energy and provides high-voltage capacitive decoupling to meet strict EMC and EMI limits.
Can the LPJ0011GDNL be used in Power over Ethernet (PoE) applications?
No. The LPJ0011GDNL is rated for Non-PoE Ethernet applications. Its internal magnetic components and wiring are designed exclusively for Fast Ethernet differential data communication and galvanic isolation, and are not rated to handle the DC currents specified under IEEE 802.3af/at/bt PoE standards.
What gold plating options are available for the contact mating area?
The LPJ0011GDNL is available with Gold 6 micro-inch, 15 micro-inch, or 30 micro-inch plating options on the contact mating area. Design and procurement teams can select the appropriate gold thickness based on required mating cycles, environmental corrosiveness, and target device service life.
Model 21:18 ThinkingThoughts Expand to view model thoughts chevron_right
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































