HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJ0011GBNL(1714198828832).jpg
  • LPJ0011GBNL-4(1714198829023).jpg
  • LPJ0011GBNL-3(1714198828909).jpg
  • LPJ0011GBNL-2(1714198828877).jpg
  • LPJ0011GBNL-1(1714198828896).jpg

RJ-005B Compatible LINK-PP LPJ0011GBNL 10/100 Base-T Tab Down Green/Yellow Led Single Port Modular Jack RJ45 Connector

P/N:

LPJ0011GBNL

Manufacturer:

LINK-PP

Compatible Brand:

Taimag

Compatible P/N:

LPJ0011GBNL

  • Number of Ports: 1X1
  • Speed: 10Base-T,100Base-TX
  • PoE: Non-PoE
  • Latch: Down
  • Mounting Type: THT
  • LED Option: Green / Yellow
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJ0011GBNL
  • Manufacturer: LINK-PP
  • Compatible Brand: Taimag
  • Compatible P/N: RJ-005B

Packaging Details:

N.W/pCS:

0.007kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1200pcs

Carton size:

32*30*31cm

G.W/carton:

8.5kg

Product Specifications

LINK-PP Part Number LPJ0011GBNL Taimag Equivalent Part Number RJ-005B
Connector Type RJ45 MagJack (Integrated Magnetics) Part Status Active
Number of Positions/Contacts 8P8C (RJ45, Ethernet) Application-LAN Ethernet (Non-PoE)
Number of Ports Single Port (1×1) Speed 10/100BASE-T
Latch Orientation Down (Tab-Down) Cores per Port 4
Orientation 90° Angle (Right) PCB Mount Angle Side Entry (Through Hole)
Shield EMI Tabs With EMI Tabs LED Option Green / Yellow
PCB Material FR4 PCB Retaining Post T-Post
Package Height (Inches/mm) 0.528 / 13.40 Package Length (Inches/mm) 0.839 / 21.30
Package Width (Inches/mm) 0.626 / 15.90 Operating Temperature 0°C to +70°C (Commercial)
BST Circuit Yes AutoMDX Yes
Diodes No Contact Mating Area Plating Gold 6µ" / 15µ" / 30µ"
Turns Ratio (RX/TX) 1CT:1CT Configuration (RX/TX) T, C

Single-Port 10/100BASE-T Fast Ethernet RJ45 MagJack (Tab-Down, Side Entry, Green/Yellow LEDs)

The LINK-PP LPJ0011GBNL is a single-port 10/100BASE-T Fast Ethernet RJ45 integrated connector module (MagJack) engineered in a right-angle, side-entry through-hole profile with a Tab-Down latch configuration. For hardware design engineers, it consolidates a 4-core magnetic architecture, 1CT:1CT turns ratio, integrated Bob Smith termination (BST), AutoMDX support, and Green/Yellow status LEDs, delivering reliable IEEE 802.3 compliant signal isolation and common-mode noise suppression. For procurement and sourcing managers, the LPJ0011GBNL serves as a direct, form-fit-function cross-reference to the Taimag RJ-005B, providing active lifecycle status, flexible gold plating options (6µ", 15µ", or 30µ") for BOM cost optimization, and multi-source AVL supply resilience. For OEM system integrators, its 13.40 mm low-profile housing, perimeter shield EMI tabs, and molded T-Post retaining pins facilitate clean front-panel grounding and mechanical durability across intercom stations, smart home hubs, entrance guard access terminals, and network firewalls.

Operating across a commercial temperature range of 0°C to +70°C, the LPJ0011GBNL is dedicated to non-PoE Fast Ethernet data communications. Hardware engineering teams should verify the PCB footprint, pinout mapping, LED forward drive currents, and PHY transceiver guidelines against the official LINK-PP mechanical drawing before volume manufacturing release.

Ethernet Speed: Single-Port 10/100BASE-T
Latch Orientation: Tab-Down (Bottom Latch)
Direct Cross Reference: Taimag RJ-005B
Magnetics Architecture: 4-Core Integrated Design
Shield Configuration: Metal Shield (With EMI Tabs)
Status Indication: Green / Yellow LEDs

Compatibility and Design Positioning

The LINK-PP LPJ0011GBNL is engineered as an electrically and mechanically compatible alternative to the Taimag RJ-005B 10/100BASE-T RJ45 MagJack. Both connectors feature an 8P8C interface, 1CT:1CT turns ratio on transmit and receive channels, Tab-Down latch orientation, side-entry through-hole mounting, integrated BST circuits, and Green/Yellow LED configurations. Engineering and procurement teams qualifying a secondary source or consolidating BOM items can integrate the LPJ0011GBNL into existing layouts with minimal modifications. Design teams should cross-check footprint pad coordinates, T-Post hole diameters, and front-panel cutout dimensions against the official LINK-PP technical drawing to confirm compatibility.

Tab-Down Latch Topology and Enclosure Front-Panel Optimization

The Tab-Down connector geometry offers significant layout and packaging benefits for compact devices, rackmount hardware, and wall-mounted security terminals:

  • Ergonomic Latch Clearance: Orienting the latch release tab downward prevents mechanical interference with upper enclosure bezels, display frames, or protruding chassis overhangs during cable disconnection.
  • Low 13.40 mm Height Envelope: The compact vertical height supports shallow 1U rack enclosures, flush intercom faceplates, and slim security gateway enclosures.
  • Perimeter EMI Spring Tabs: Surrounding spring tabs create continuous multi-point contact with the metal front panel, suppressing radiated emissions and shunting high-frequency noise away from internal circuitry.
  • Mechanical T-Post Anchoring: Molded plastic T-Posts anchor the housing to the FR4 PCB, absorbing mating insertion and cable pull forces to prevent stress fractures on through-hole solder joints.

Integrated 4-Core Fast Ethernet Magnetics and AutoMDX Support

The LPJ0011GBNL incorporates an internal 4-core magnetic design (two cores for the transmit pair and two cores for the receive pair) in a T, C configuration. With a symmetrical 1CT:1CT turns ratio, the connector provides broad compatibility with standard current-mode and voltage-mode Fast Ethernet PHY transceivers.

An internal Bob Smith termination (BST) network damps common-mode energy and suppresses line-side noise. Full AutoMDX support allows automatic detection and correction of crossed transmit/receive lines without external configuration. Integrated isolation transformers provide IEEE 802.3-compliant galvanic isolation, protecting the host system from cable-induced transients, ground offset voltages, and electrostatic discharge.

Mechanical Envelope and PCB Layout Considerations

When implementing the LPJ0011GBNL in high-reliability hardware platforms, layout and mechanical engineers should observe the following guidelines:

1. Package Dimensions and Front-Panel Cutout

The connector body measures 13.40 mm (0.528 inches) in height, 21.30 mm (0.839 inches) in length, and 15.90 mm (0.626 inches) in width. Enclosure openings must be sized to ensure uniform compression of the perimeter EMI spring tabs without mechanical deformation.

2. Tab-Down Latch Clearance and Field Servicing

Because the release latch is positioned on the bottom edge, designers should maintain adequate clearance between the underside of the connector and any protruding enclosure lip or bottom bezel to ensure easy thumb access during field maintenance.

3. Through-Hole T-Post Anchoring

The molded plastic T-Posts provide positive physical retention and alignment on the FR4 PCB. Accurate drill diameters and hole spacing on the host PCB ensure correct vertical positioning and mechanical stress redistribution during repeated cable mating.

4. Shield Grounding and Status LED Routing

The exterior metal shield features dedicated through-hole ground pins that should tie directly to chassis ground with short, low-impedance traces. Green and Yellow LED through-hole terminals interface with the host PHY driver outputs; series current-limiting resistors should be calculated according to target drive voltages and required brightness levels.

Architecture Comparison: Single-Port MagJack vs. Alternative Implementations

Evaluation Metric LPJ0011GBNL
Tab-Down Integrated MagJack
Discrete Magnetics +
Modular RJ45 Jack
Tab-Up Integrated
RJ45 MagJack
Component Architecture Integrated (Magnetics + Jack) Separate (Transformer + Jack) Integrated (Magnetics + Jack)
Latch Orientation Tab-Down (Bottom Latch) Design-dependent Tab-Up (Top Latch)
Placement Operations Single connector assembly Two individual placements Single connector assembly
Board-Edge Footprint Consolidated 15.90 mm width Extended (Inter-chip routing required) Comparable ~16.00 mm width
Chassis Bezel Ergonomics Clearance for top bezels/overhangs Connector-dependent Clearance for bottom bezels
Primary Design Focus Front-panel Fast Ethernet integration Modular routing flexibility Standard top-latch preference

Application Considerations for LPJ0011GBNL

Target Application Profile Primary Engineering Consideration
Residential Intercom & Video Door Entry Tab-Down orientation prevents interference with top-mounted microphone arrays, camera housings, and display bezels.
Smart Home Hubs & Residential Gateways Compact 13.40 mm height enables sleek enclosure packaging while delivering standard Green/Yellow link activity indication.
Entrance Guard & Building Access Terminals Integrated Bob Smith termination and robust metal shielding protect against electrostatic discharge in wall-mounted units.
Network Firewalls & Security Edge Devices Direct drop-in compatibility with industry-standard footprints streamlines multi-source procurement.

Engineering Verification Checklist

Before completing PCB layout or issuing volume purchase orders for the LPJ0011GBNL, hardware engineers should verify the following design parameters:

  • Footprint and Pin Assignment: Cross-check the 8P8C signal pin pattern, T-Post hole diameters, and shield ground pin drill locations against the official LINK-PP LPJ0011GBNL product drawing.
  • Cross-Reference Validation: Confirm pin-for-pin compatibility and package dimensions against the Taimag RJ-005B drawing when qualifying as an alternative sourcing option.
  • Chassis Bezel Clearance: Verify that the front-panel cutout provides sufficient clearance beneath the connector for unhindered operation of the Tab-Down RJ45 latch.
  • LED Polarity and Drive Circuitry: Confirm host PHY LED driver polarity (common anode vs. common cathode) and implement appropriate current-limiting resistors for the Green and Yellow LEDs.
  • Chassis Ground Continuity: Ensure that the front-panel bezel makes uniform contact with the metal shield EMI tabs without mechanical binding.
  • Operating Thermal Profile: Verify that the equipment operating environment remains within the specified 0°C to +70°C commercial temperature range.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LPJ0011GBNL?

The LINK-PP LPJ0011GBNL is a single-port 10/100BASE-T Fast Ethernet RJ45 MagJack featuring an 8P8C contact configuration, 4-core internal magnetics, 1CT:1CT turns ratio, Tab-Down latch orientation, side-entry through-hole mounting, Green/Yellow LEDs, integrated BST circuit, AutoMDX support, and an operating temperature range of 0°C to +70°C.

Is the LINK-PP LPJ0011GBNL compatible with the Taimag RJ-005B?

Yes. The LPJ0011GBNL is engineered as an electrically and mechanically compatible cross-reference for the Taimag RJ-005B. Both connectors share matching 8P8C pinouts, 1CT:1CT turns ratios, Tab-Down latch profiles, Green/Yellow LED configurations, and through-hole PCB footprints. Engineering teams should cross-reference official product drawings before volume changeovers.

What are the engineering benefits of the Tab-Down latch orientation in intercom and access control hardware?

A Tab-Down latch positions the RJ45 plug release latch on the underside of the connector. This orientation avoids mechanical interference with upper enclosure bezels, display frames, cameras, or protruding chassis lips, making it significantly easier for technicians and operators to disconnect network cables in compact wall-mounted equipment.

What is the function of the internal 4-core magnetics and BST circuit?

The 4-core magnetics provide two isolation transformers and two common-mode chokes for the Fast Ethernet transmit and receive channels, ensuring IEEE 802.3 signal integrity and 1500Vrms isolation. The integrated Bob Smith termination (BST) network damps common-mode energy and provides high-voltage capacitive decoupling to meet strict EMC limits.

Can the LPJ0011GBNL be used in Power over Ethernet (PoE) applications?

No. The LPJ0011GBNL is rated for Non-PoE Ethernet applications. Its internal magnetic components and wiring are designed exclusively for Fast Ethernet differential data communication and galvanic isolation, and are not rated to carry the DC currents defined under IEEE 802.3af/at/bt PoE standards.

What contact plating options are available for the LPJ0011GBNL?

The LPJ0011GBNL is offered with Gold 6 micro-inch, 15 micro-inch, or 30 micro-inch plating options on the contact mating area. Design and procurement teams can select the appropriate gold thickness based on required mating cycles, environmental corrosiveness, and target device service life.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.