XFMRS XFATM2E-Clxu1-4MS Compatible LINK-PP LPJ4011GENL 10/100 Base-T Tab Down Green/Yellow Led 1 Port Integrated Connector RJ45 Modules
P/N:
LPJ4011GENL
Manufacturer:
LINK-PP
Compatible Brand:
XFMRS
Compatible P/N:
LPJ4011GENL
- Compatible Brands: XFMRS
- Number of Ports: 1X1
- Speed: 10Base-T,100Base-TX
- PoE: Non-PoE
- Latch: Down
- Mounting Type: THT
- LED Option: Green / Yellow
- Shield EMI Tabs: YES
- Temperature: -40℃ to +85°C
- P/N: LPJ4011GENL
- Manufacturer: LINK-PP
- Compatible Brand: XFMRS
- Compatible P/N: XFATM2E-Clxu1-4MS
Packaging Details:
N.W/pCS:
0.007kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1200pcs
Carton size:
32*30*31cm
G.W/carton:
8.5kg
Product Specifications
| LINK-PP Part Number | LPJ4011GENL | XFMRS Equivalent Part Number | XFATM2E-Clxu1-4MS |
| Connector Type | RJ45 MagJack (Integrated Magnetics) | Part Status | Active |
| Number of Positions/Contacts | 8P8C (RJ45, Ethernet) | Application-LAN | Ethernet (Non-PoE) |
| Number of Ports | Single Port (1×1) | Speed | 10/100BASE-T |
| Latch Orientation | Down (Tab-Down) | Cores per Port | 4 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | Side Entry (Through Hole) |
| Shield EMI Tabs | With EMI Tabs | LED Option | Green / Yellow |
| PCB Material | FR4 | PCB Retaining Post | T-Post |
| Package Height (Inches/mm) | 0.524 / 13.30 | Package Length (Inches/mm) | 0.837 / 21.25 |
| Package Width (Inches/mm) | 0.627 / 15.93 | Operating Temperature | -40°C to +85°C (Industrial) |
| BST Circuit | Yes | AutoMDX | Yes |
| Diodes | No | Contact Mating Area Plating | Gold 6µ" / 15µ" / 30µ" |
| Turns Ratio (RX/TX) | 1CT:1CT | Configuration (RX/TX) | T, C |
Single-Port 10/100BASE-T Industrial RJ45 MagJack (Tab-Down, Side Entry, Green/Yellow LEDs)
The LINK-PP LPJ4011GENL is an industrial-grade single-port 10/100BASE-T Fast Ethernet RJ45 integrated connector module (MagJack) engineered in a right-angle, side-entry through-hole profile with a Tab-Down latch orientation. For hardware design engineers, it consolidates a 4-core magnetic structure, 1CT:1CT turns ratio, integrated Bob Smith termination (BST), AutoMDX support, Green/Yellow status LEDs, and an extended industrial operating temperature range of -40°C to +85°C, ensuring signal integrity and IEEE 802.3 compliant isolation under severe thermal stress. For procurement and sourcing teams, the LPJ4011GENL provides a direct form-fit-function cross-reference to the XFMRS XFATM2E-Clxu1-4MS, featuring active lifecycle availability, customizable gold plating options (6µ", 15µ", or 30µ") for BOM cost optimization, and multi-source AVL supply resilience. For OEM system integrators, its 13.30 mm low-profile housing, perimeter shield EMI tabs, and molded T-Post retaining pins facilitate secure chassis grounding and mechanical durability across outdoor security monitoring systems, entrance guard terminals, industrial network firewalls, and Ethernet switches.
Specified for operation across -40°C to +85°C, the LPJ4011GENL delivers non-PoE Fast Ethernet connectivity suitable for unconditioned outdoor enclosures and industrial control cabinets. Hardware engineering teams should verify the PCB footprint, pinout mapping, LED drive circuitry, and PHY transceiver reference guidelines against the official LINK-PP mechanical drawing before volume production release.
Compatibility and Design Positioning
The LINK-PP LPJ4011GENL is engineered as an electrically and mechanically compatible second-source alternative to the XFMRS XFATM2E-Clxu1-4MS 10/100BASE-T RJ45 MagJack. Both connectors share identical 8P8C through-hole pinouts, 1CT:1CT turns ratios across transmit and receive channels, Tab-Down latching, Green/Yellow LED configurations, and an industrial -40°C to +85°C operating temperature range. Sourcing and engineering teams seeking an approved second source or cost-optimized alternative can integrate the LPJ4011GENL into existing layouts with minimal modifications. Design teams should cross-check footprint pad coordinates, T-Post hole diameters, and front-panel cutout dimensions against the official LINK-PP technical drawing to confirm compatibility.
Tab-Down Latch Topology and Industrial Enclosure Optimization
The combination of a Tab-Down latch, perimeter EMI shielding, and industrial-grade temperature rating provides key operational benefits for ruggedized and space-constrained hardware:
- Ergonomic Latch Clearance: Positioning the latch release tab on the bottom edge prevents mechanical interference with upper enclosure bezels, display frames, or protruding chassis overhangs during cable disconnection.
- -40°C to +85°C Industrial Operating Range: Engineered with high-stability magnetic cores and industrial-grade dielectric materials, ensuring consistent inductance (OCL ≥ 350 µH) and link performance in unventilated or outdoor enclosures.
- Compact 13.30 mm Height Profile: The low vertical profile easily accommodates slim 1U chassis, outdoor camera housings, and wall-mounted security access boxes.
- Perimeter EMI Spring Tabs: Surrounding spring tabs maintain positive multi-point contact with the chassis front panel, suppressing radiated emissions and shunting high-frequency noise away from internal circuitry.
- Mechanical T-Post Anchoring: Molded plastic T-Posts secure the housing to the FR4 PCB, absorbing mating insertion and extraction forces to protect electrical solder joints from fatigue and stress fractures.
Integrated 4-Core Fast Ethernet Magnetics and AutoMDX Support
The LPJ4011GENL incorporates an internal 4-core magnetic design (two cores for the transmit pair and two cores for the receive pair) in a T, C configuration. With a symmetrical 1CT:1CT turns ratio, the connector provides broad compatibility with standard current-mode and voltage-mode Fast Ethernet PHY transceivers.
An internal Bob Smith termination (BST) network damps common-mode energy and suppresses line-side noise. Full AutoMDX support allows automatic detection and correction of crossed transmit/receive lines without external configuration. Integrated isolation transformers provide IEEE 802.3-compliant galvanic isolation, protecting the host system from cable-induced transients, ground offset voltages, and electrostatic discharge across the full industrial temperature window.
Mechanical Envelope and PCB Layout Considerations
When implementing the LPJ4011GENL in high-reliability hardware platforms, layout and mechanical engineers should observe the following guidelines:
1. Package Dimensions and Front-Panel Cutout
The connector body measures 13.30 mm (0.524 inches) in height, 21.25 mm (0.837 inches) in length, and 15.93 mm (0.627 inches) in width. Front-panel openings must be sized to ensure uniform compression of the perimeter EMI spring tabs without mechanical binding or distortion.
2. Tab-Down Latch Clearance and Field Servicing
Because the release latch is positioned on the bottom edge, designers should maintain adequate clearance between the underside of the connector and any protruding enclosure lip or bottom bezel to ensure easy thumb access during field maintenance.
3. Through-Hole T-Post Anchoring
The molded plastic T-Posts provide positive physical retention and alignment on the FR4 PCB. Accurate drill diameters and hole spacing on the host PCB ensure correct vertical positioning and mechanical stress redistribution during repeated cable mating.
4. Shield Grounding and Status LED Routing
The exterior metal shield features dedicated through-hole ground pins that should tie directly to chassis ground with short, low-impedance traces. Green and Yellow LED through-hole terminals interface with the host PHY driver outputs; series current-limiting resistors should be calculated according to target drive voltages and required brightness levels.
Architecture Comparison: Industrial Tab-Down MagJack vs. Alternative Implementations
| Evaluation Metric | LPJ4011GENL Industrial Tab-Down MagJack |
Commercial Tab-Down RJ45 MagJack |
Discrete Magnetics + Modular RJ45 Jack |
|---|---|---|---|
| Operating Temperature | -40°C to +85°C (Industrial) | 0°C to +70°C (Commercial) | Model-dependent |
| Thermal Core Stability | High (Certified across full range) | Standard commercial stability | Component-dependent |
| Component Architecture | Integrated (Magnetics + Jack) | Integrated (Magnetics + Jack) | Separate (Transformer + Jack) |
| SMT/THT Placements | Single connector assembly | Single connector assembly | Two individual placements |
| Board-Edge Footprint | Consolidated 15.93 mm width | Consolidated ~16.00 mm width | Extended (Inter-chip routing required) |
| Primary Design Focus | Ruggedized industrial Ethernet I/O | Cost-sensitive indoor networking | Modular routing flexibility |
Application Considerations for LPJ4011GENL
| Target Application Profile | Primary Engineering Consideration |
|---|---|
| Security Monitoring Systems & Outdoor IP Cameras | -40°C to +85°C rating maintains network link reliability in unheated outdoor housings subject to severe temperature cycles. |
| Entrance Guard & Building Access Terminals | Tab-Down orientation facilitates ergonomic cable disconnection in flush-mount wall boxes and security terminals. |
| Industrial Network Firewalls & Gateways | Integrated Bob Smith termination and perimeter EMI tabs provide high noise margin on dense front panels in noisy factory environments. |
| Industrial Ethernet Switches & Edge Nodes | Direct drop-in compatibility with industry-standard footprints streamlines multi-source procurement and AVL qualification. |
Engineering Verification Checklist
Before completing PCB layout or issuing volume purchase orders for the LPJ4011GENL, hardware engineers should verify the following design parameters:
- Footprint and Pin Assignment: Cross-check the 8P8C signal pin pattern, T-Post hole diameters, and shield ground pin drill locations against the official LINK-PP LPJ4011GENL product drawing.
- Cross-Reference Validation: Confirm pin-for-pin compatibility and package dimensions against the XFMRS XFATM2E-Clxu1-4MS drawing when qualifying as an alternative sourcing option.
- Chassis Bezel Clearance: Verify that the front-panel cutout provides sufficient clearance beneath the connector for unhindered operation of the Tab-Down RJ45 latch.
- LED Polarity and Drive Circuitry: Confirm host PHY LED driver polarity (common anode vs. common cathode) and implement appropriate current-limiting resistors for the Green and Yellow LEDs.
- Chassis Ground Continuity: Ensure that the front-panel bezel makes uniform contact with the metal shield EMI tabs without mechanical binding.
- Thermal Operating Envelope: Verify that the equipment operating environment remains within the specified -40°C to +85°C industrial temperature range under sustained data traffic.
Frequently Asked Questions
What are the primary specifications of the LINK-PP LPJ4011GENL?
The LINK-PP LPJ4011GENL is an industrial single-port 10/100BASE-T Fast Ethernet RJ45 MagJack featuring an 8P8C contact configuration, 4-core internal magnetics, 1CT:1CT turns ratio, Tab-Down latch orientation, side-entry through-hole mounting, Green/Yellow LEDs, integrated BST circuit, AutoMDX support, and an extended operating temperature range of -40°C to +85°C.
Is the LINK-PP LPJ4011GENL compatible with the XFMRS XFATM2E-Clxu1-4MS?
Yes. The LPJ4011GENL is engineered as an electrically and mechanically compatible cross-reference for the XFMRS XFATM2E-Clxu1-4MS. Both connectors share matching 8P8C pinouts, 1CT:1CT turns ratios, Tab-Down latch profiles, Green/Yellow LED configurations, -40°C to +85°C temperature ratings, and through-hole PCB footprints. Engineering teams should cross-reference official product drawings before volume changeovers.
What is the significance of the -40°C to +85°C industrial temperature rating?
The -40°C to +85°C industrial operating temperature rating ensures that the internal magnetic cores maintain their inductance (OCL ≥ 350 µH) and signal isolation characteristics across severe thermal swings. This makes the LPJ4011GENL suitable for unconditioned outdoor enclosures, roadside cabinets, and industrial factory floor environments where commercial 0°C to +70°C components could experience signal degradation.
What are the engineering benefits of the Tab-Down latch orientation?
A Tab-Down latch positions the RJ45 plug release latch on the underside of the connector. This orientation avoids mechanical interference with upper enclosure bezels, display frames, cameras, or protruding chassis lips, making it significantly easier for technicians and operators to disconnect network cables in compact wall-mounted equipment.
What is the function of the internal 4-core magnetics and BST circuit?
The 4-core magnetics provide two isolation transformers and two common-mode chokes for the Fast Ethernet transmit and receive channels, ensuring IEEE 802.3 signal integrity and 1500Vrms isolation. The integrated Bob Smith termination (BST) network damps common-mode energy and provides high-voltage capacitive decoupling to meet strict EMC limits.
Can the LPJ4011GENL be used in Power over Ethernet (PoE) applications?
No. The LPJ4011GENL is rated for Non-PoE Ethernet applications. Its internal magnetic components and wiring are designed exclusively for Fast Ethernet differential data communication and galvanic isolation, and are not rated to carry the DC currents defined under IEEE 802.3af/at/bt PoE standards.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































