HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • 13F-63GYDSZ2NL YDS.jpg
  • HFJ11-2450E-LS12RL.jpg
  • HY911105H.jpg
  • J0011D21BNL.jpg
  • J00-0065NL.jpg

HR911105H Compatible LINK-PP LPJ4011ABNL 10/100 Base-T 1x1 Port Integrated RJ 45 connector Tab Down Green/Yellow Led

P/N:

LPJ4011ABNL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJ4011ABNL

  • Number of Ports: 1X1
  • Speed: 10Base-T,100Base-TX
  • PoE: Non-PoE
  • Latch: Down
  • Mounting Type: THT
  • LED Option: Green / Yellow
  • Shield EMI Tabs: YES
  • Temperature: -40℃ to +85°C
  • P/N: LPJ4011ABNL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: HR911105H

Packaging Details:

N.W/pCS:

0.007kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1200pcs

Carton size:

32*30*31cm

G.W/carton:

8.5kg

Product Specifications

LINK-PP Part Number LPJ4011ABNL Part Number HR911105H
Part Status Active Connector Type Jack
Number of Positions/Contacts 8P8C (RJ45, Ethernet) Application-LAN Ethernet (Non-PoE)
Number of Ports 1x1 Port Speed 10/100BASE-T
Latch Down Cores per Port 4
Orientation 90° Angle (Right) PCB Mount Angle Side Entry
Shield EMI Tabs With LED Option Green / Yellow
PCB FR4 PCB Retaining Post T-Post
Package Height (Inches/mm) 0.524 / 13.30 Package Length (Inches/mm) 0.837 / 21.25
Package Width (Inches/mm) 0.627 / 15.93 Temperature -40°C to +85°C
BST Circuit Yes AutoMDX Yes
Diodes No Contact Mating Area Plating Gold 6µ" / 15µ" / 30µ"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T, C

HR911105H Compatible Single-Port Industrial 10/100BASE-T Integrated RJ45 MagJack

The LINK-PP LPJ4011ABNL is a single-port integrated RJ45 MagJack engineered for 10/100BASE-T Fast Ethernet applications in harsh, wide-temperature non-PoE network designs. Featuring a Tab-Down (bottom latch) orientation, a compact 21.25 mm (0.837 inches) package length, and an extended operating temperature range of -40°C to +85°C, it combines an 8P8C modular interface, 4-core isolation magnetics, Bob Smith termination, and Green/Yellow status LEDs inside a shielded through-hole housing.

The connector features a 90° right-angle, side-entry profile with perimeter EMI grounding tabs and T-Post mechanical PCB retention. It is positioned as a compatible alternative to the HR911105H for smart cameras, industrial PCs, game controllers, embedded mainboards, and network interface cards (NICs) where board depth, thermal resilience, and upper panel clearances are primary design constraints.

Hardware designers should verify the mechanical drawing, pin assignment, PCB land pattern, and PHY manufacturer interface guidelines against product documentation before releasing PCB layouts for production.

Ethernet Speed: 10/100BASE-T Fast Ethernet
Reference Part: HR911105H
Latch Orientation: Tab-Down (Bottom Latch)
Package Depth: Compact 21.25 mm Length
Operating Temperature: -40°C to +85°C Industrial
Shield Configuration: Metal Shield (With EMI Tabs)

HR911105H Compatible Design Positioning

The LPJ4011ABNL is positioned as a compatible alternative to the HR911105H for 10/100BASE-T Fast Ethernet applications, providing hardware engineering and procurement teams with a potential second-source option for designs requiring comparable package, footprint, and electrical interface characteristics.

To ensure proper integration on existing or new motherboard designs, engineering teams should cross-reference the mechanical drawing, pin assignment, solder pad geometry, and electrical characteristics against original design requirements prior to volume release.

Tab-Down Latch Geometry and Short-Depth Enclosure Integration

Mechanical layout constraints often dictate the required latch orientation and component depth of front-panel RJ45 jacks:

  • Tab-Down Accessibility: In systems where the connector is positioned near the upper edge of an enclosure, under an overhang, or beneath an LCD display bezel, a standard Tab-Up latch can be difficult to reach. The Tab-Down (bottom latch) configuration places the plug release tab on the lower side, ensuring unobstructed cable disengagement.
  • Compact 21.25 mm Package Length: Standard Fast Ethernet MagJacks commonly feature package lengths of 25.25 mm or greater. The LPJ4011ABNL's compact 21.25 mm depth frees valuable PCB space directly behind the connector, facilitating shorter trace routing to PHY transceivers, decoupling capacitors, and power management circuits.
  • Metal Shielding with EMI Tabs: Spring-finger grounding tabs around the perimeter of the metal shell establish multi-point contact with the equipment front panel or bezel cutout, supporting the system-level shielding and grounding architecture.

10/100BASE-T Signal Transmission and 4-Core Magnetics Architecture

Fast Ethernet (100BASE-TX) communication utilizes two differential pairs: one dedicated to transmit (TX) and one to receive (RX). The LPJ4011ABNL incorporates an internal 4-core magnetic structure with a 1CT:1CT turns ratio (T, C configuration), providing galvanic isolation and common-mode filtering specifically for these active pairs.

Specified for operation across -40°C to +85°C, the magnetic core materials maintain stable open-circuit inductance (OCL) and baseline wander compensation across harsh thermal excursions. Because the connector is engineered specifically for non-PoE architectures, the internal magnetic layout is dedicated to differential data transmission without allocating space or thermal margins to high-current DC power paths.

Hardware designers should evaluate the MagJack in conjunction with the host Fast Ethernet PHY transceiver, differential trace layout, ground plane design, and enclosure EMC strategy to ensure proper physical-layer performance.

Mechanical and PCB Design Considerations

Physical mounting orientation and board anchoring are key considerations when integrating short-body RJ45 jacks:

1. 8P8C Interface and PCB Termination

The 8P8C configuration features an 8-contact RJ45 mating face alongside through-hole termination pins on the PCB side. The terminal pins accommodate differential data lines, common-mode termination references, and integrated LED connections.

Engineers should consult the official mechanical drawing to verify pin pitch, drill diameters, and trace clearance requirements before releasing board artwork.

2. T-Post Mechanical Retention

A molded T-Post locating peg anchors the connector body securely to the FR4 PCB. It assists in absorbing lateral and axial forces during cable insertion and extraction, supporting solder-joint reliability under mechanical stress.

3. Status LED Indicators

The connector incorporates Green and Yellow LEDs for visual link and network activity indication. Current-limiting resistors and drive circuits must be implemented on the host PCB in accordance with PHY specifications and LED electrical ratings.

Architecture Comparison: Industrial Short-Body MagJack vs. Alternative Implementations

Evaluation Metric LPJ4011ABNL
Industrial Tab-Down 10/100 MagJack
Standard Commercial
Tab-Up 10/100 MagJack
Gigabit 1000BASE-T
MagJack
Operating Temperature -40°C to +85°C (Industrial) 0°C to +70°C (Commercial) Model-dependent
Package Length (Depth) Compact (21.25 mm / 0.837 in) Standard (25.25 mm / 0.994 in) Typically 25.40 mm – 32.50 mm
Latch Orientation Tab-Down (Bottom Latch) Tab-Up (Top Latch) Tab-Up or Tab-Down
Active Twisted Pairs 2 Pairs (TX / RX) 2 Pairs (TX / RX) 4 Pairs (Full Duplex)
PCB Component Count Reduced — consolidates jack, magnetics, LEDs Reduced Reduced
Primary Advantage Wide thermal range & compact depth for industrial I/O Standard commercial applications Higher Gigabit throughput

Application Considerations for LPJ4011ABNL

Target Application Profile Potential Plating Option Primary Engineering Consideration
Smart Cameras & Outdoor Vision Systems Gold 15µ" / 30µ" -40°C to +85°C operating range, compact 21.25 mm length, and perimeter EMI tabs for panel grounding.
Industrial PCs & Automation Controllers Gold 15µ" / 30µ" Thermal cycling resilience, robust T-Post PCB anchoring against vibration, and reliable Fast Ethernet isolation.
Game Hardware & Multi-Media Controllers Gold 6µ" / 15µ" High-speed 10/100BASE-T throughput, space-saving board footprint, and integrated status LEDs.
Embedded Single-Board Computers & NICs Gold 6µ" / 15µ" Consolidates physical-layer magnetics and termination into a small footprint, freeing PCB routing space.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials (BOM) using the LPJ4011ABNL, hardware engineers should confirm the following design parameters against the official product drawing:

  • Package Dimensions & Clearances: Verify the 13.30 mm height, 21.25 mm length, and 15.93 mm width against internal enclosure clearances.
  • Pinout and Schematic Alignment: Verify the terminal numbering, center-tap connections, and differential-pair assignments against the official product drawing and selected PHY reference design.
  • Tab-Down Latch Clearance: Ensure adequate clearance below the front-panel cutout for RJ45 plug latch disengagement during maintenance.
  • PCB Land Pattern: Check through-hole pad diameters, T-Post hole locations, and shield ground pin drill sizes on the manufacturer's footprint drawing.
  • EMI Tab Contact Geometry: Confirm front-panel cutout dimensions ensure continuous mechanical contact with the shield EMI spring tabs.
  • LED Drive Circuitry: Implement suitable series current-limiting resistors and drive circuits on the host PCB matched to the selected PHY.
  • Thermal Operating Environment: Confirm the operating environment remains within the specified -40°C to +85°C industrial temperature range.

Frequently Asked Questions

Is the LINK-PP LPJ4011ABNL a compatible alternative to the HR911105H?

The LPJ4011ABNL is designed as a compatible alternative to the HR911105H with a single-port 10/100BASE-T MagJack configuration, Tab-Down latch, compact 21.25 mm package length, 8P8C pinout, Green/Yellow LEDs, T-Post PCB retention, metal shield with EMI tabs, and an industrial operating temperature range of -40°C to +85°C. Engineers should verify the mechanical drawing, pin assignments, and PCB land pattern before production use.

What is the significance of the -40°C to +85°C operating temperature rating?

The -40°C to +85°C rating indicates that the internal magnetics, winding insulation, and housing materials maintain required electrical isolation, baseline wander compensation, and signal coupling across industrial temperature extremes, making the connector suitable for outdoor cameras, factory automation, and harsh commercial environments.

What is the mechanical advantage of the Tab-Down latch and 21.25 mm package length?

The Tab-Down latch places the release tab on the bottom of the connector, facilitating plug removal when mounted near the upper edge of an enclosure or under a display bezel. The compact 21.25 mm length reduces board depth requirements, freeing space behind the connector for host-board routing.

What is the function of the 4-core magnetic design?

The 4-core magnetic structure provides isolation transformers and common-mode chokes for the two differential pairs (transmit and receive) used in 10/100BASE-T Fast Ethernet, providing physical-layer signal coupling and common-mode noise filtering.

Is the LPJ4011ABNL suitable for Power over Ethernet (PoE)?

No. The LPJ4011ABNL is specified as a Non-PoE connector for data-only Fast Ethernet interfaces. For systems requiring PoE power delivery, a MagJack with dedicated PoE-rated magnetics and DC current paths should be selected.

What contact plating options are available for the LPJ4011ABNL?

The LPJ4011ABNL is available with 6 micro-inch, 15 micro-inch, or 30 micro-inch gold plating options at the contact mating area. Selection should be evaluated based on the expected mating cycles, operating environment, and application durability requirements.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.