LINK-PP LPJ0011FBNL cross Hanrun HR911105A 10/100 Base-T 1x1 Port RJ45 Magnetics Modular Jack Tab Down Green/Yellow Led
P/N:
LPJ0011FBNL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJ0011FBNL
- Number of Ports: 1X1
- Speed: 10Base-T,100Base-TX
- PoE: Non-PoE
- Latch: Down
- Mounting Type: THT
- LED Option: Green / Yellow
- Shield EMI Tabs: NO
- Temperature: 0℃ to 70℃
- P/N: LPJ0011FBNL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: HR911105A
Packaging Details:
N.W/pCS:
0.007kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1200pcs
Carton size:
32*30*31cm
G.W/carton:
8.5kg
Product Specifications
| LINK-PP Part Number | LPJ0011FBNL | Part Number | HR911105A |
| Part Status | Active | Connector Type | Jack |
| Number of Positions/Contacts | 8P8C (RJ45, Ethernet) | Application-LAN | Ethernet (Non-PoE) |
| Number of Ports | 1x1 Port | Speed | 10/100BASE-T |
| Latch | Down | Cores per Port | 4 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | Side Entry |
| Shield EMI Tabs | Without | LED Option | Green / Yellow |
| PCB | FR4 | PCB Retaining Post | T-Post |
| Package Height (Inches/mm) | 0.528 / 13.40 | Package Length (Inches/mm) | 0.836 / 21.30 |
| Package Width (Inches/mm) | 0.626 / 15.90 | Temperature | 0°C to +70°C |
| BST Circuit | Yes | AutoMDX | Yes |
| Diodes | No | Contact Mating Area Plating | Gold 6µ" / 15µ" / 30µ" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T, C |
Single-Port 10/100BASE-T RJ45 Magnetic Jack
The LINK-PP LPJ0011FBNL is a single-port 8P8C RJ45 magnetic jack listed for 10/100BASE-T, Non-PoE Ethernet. Its specification identifies a Tab-Down latch, right-angle side entry, Green/Yellow LEDs, four cores per port and a 1CT:1CT RX/TX turns ratio.
The HR911105A reference is a sourcing comparison, not a verified footprint substitution. Selection depends on the host PHY circuit, connector pinout, LED wiring and panel access. Use the linked schematic and mechanical drawing to review those interfaces before ordering samples or releasing a board.
Compatibility and Design Positioning
The LINK-PP LPJ0011FBNL is presented as an alternative-sourcing option with the stated HR911105A cross-reference. This is a catalog positioning statement; compare both official drawings and validate the target assembly before substitution.
Mechanical and System Integration Considerations
- PHY interface: Match the TX/RX center-tap connections and termination network to the host PHY. The passive jack does not perform AutoMDX detection.
- Enclosure access: Check plug-release access below the Tab-Down latch with the intended cable boot installed.
- Shield interface: The table lists no external EMI tabs. Verify the actual shield contacts and chassis connection rather than assuming an EMC result.
- LED circuit: Compare the Green/Yellow polarity and pin mapping in the drawing with the board's indicator drive.
Procurement and OEM Qualification
For a quotation or sample request, provide the full LPJ0011FBNL part number, quantity, target application and required drawing revision. Confirm the selected package, assembly conditions and any required qualification records with LINK-PP. Complete sample evaluation and AVL approval before volume release; request current availability and lead time for the order.
Engineering Verification Checklist
- Identity: Match the full ordered part number and suffix to the drawing and sample.
- Documentation: Resolve the revision-check items above before PCB or system approval.
- Interface: Compare the drawing connections or mechanical interface with the target design.
- Assembly: Verify the footprint, installed envelope and approved manufacturing process.
- Operating conditions: Confirm the applicable component ratings and host environment.
- Production release: Record sample results, required documents and AVL acceptance.
Frequently Asked Questions
Is LPJ0011FBNL a direct replacement for HR911105A?
The catalog provides a cross-reference, but this page does not establish direct interchangeability. Compare official drawings, signal and LED pins, termination circuits and panel clearances before substitution.
Does the Tab-Down latch reduce the required enclosure clearance?
Latch direction determines where release access is needed. It does not remove the need for clearance around the plug, boot and release tab.
Which dimensions should be used for the PCB layout?
Use a drawing confirmed for the ordered revision. The current table and attached drawing differ, so do not release the footprint from the catalog dimensions alone.
Does LPJ0011FBNL support PoE?
The supplied table identifies Non-PoE operation. A PoE system requires a magnetic jack and power path explicitly rated for the intended application.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































