HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJG16320BENL左绿右黄10p.jpg
  • LPJG16320BENL左绿右黄10p1.jpg

LPJG16320BENL 100/1000 Base-T Right Angle Shielded RJ45 Connector

P/N:

LPJG16320BENL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJG16320BENL

  • Compatible Brands: LINK-PP
  • Number of Ports: 1X1
  • Speed: 10Base-T,100Base-TX,1000Base-T
  • PoE: Non-PoE
  • Latch: Up
  • Mounting Type: THT
  • LED Option: Green / Yellow
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJG16320BENL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LPJG16320BENL

Packaging Details:

N.W/pCS:

0.008kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1200pcs

Carton size:

32*30*31cm

G.W/carton:

9kg

Product Specifications

LINK-PP Part Number: LPJG16320BENL Connector Type Jack
Part Status Active Mounting Type Through Hole
Number of Positions/Contacts 10p8c (RJ45, Ethernet) Application-Lan Ethernet(NoN PoE)
Number of Ports 1x1 Port Speed 10/100/1000 Base-T
Latch Up Cores per Port 8
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs With LED Option Green/Yellow
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.531/13.50 Package Length (Inches/mm) 0.839/21.30
Package Width (Inches/mm) 0.628/15.95 Temperature 0℃ TO 70℃
Bst Circuit Yes AutomDX YES
Diodes - Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

LINK-PP LPJG16320BENL 1x1 Gigabit RJ45 MagJack Technical Overview

The LINK-PP LPJG16320BENL is an industry-standard 1x1 single-port 10/100/1000 Base-T Gigabit Ethernet RJ45 female connector with integrated isolation magnetics and Green/Yellow LEDs engineered for high-reliability embedded, consumer, and commercial networking platforms. Featuring a tab-up (latch up) right-angle side-entry profile, integrated 8-core 1CT:1CT isolation transformers, Bob Smith Termination (BST) circuitry, and external EMI shielding tabs, it delivers robust Ethernet PHY signal conditioning, 1500Vrms galvanic surge isolation, and common-mode noise suppression across commercial operating temperatures (0°C to +70°C).

  • Mechanical Form Factor: 1x1 Single-Port Right-Angle (90° Side Entry) Integrated Magnetics RJ45 Female Socket with Green/Yellow LEDs (0.839" L x 0.628" W x 0.531" H / 21.30mm L x 15.95mm W x 13.50mm H).
  • Signal Ecosystem Support: Fully compliant with IEEE 802.3 Gigabit Ethernet standards (10/100/1000 Base-T, non-PoE) with integrated Auto-MDIX and Bob Smith Termination support.
  • Board Mount Technology: Through-Hole (THT) board mount with T-Post PCB retaining pegs and gold-plated contacts (6µ", 15µ", or 30µ" options).
  • Cross-Reference Sourcing: Direct footprint-compatible drop-in alternative to industry 1x1 Gigabit RJ45 MagJacks from TE Connectivity, Pulse Electronics, Bel Fuse, and Wurth Elektronik for supply chain diversification.

LINK-PP LPJG16320BENL RJ45 MagJack Product Overview

LINK-PP LPJG16320BENL is a single-port 100/1000 Base-T Gigabit RJ45 MagJack connector featuring integrated isolation magnetics, Green/Yellow status LEDs, a tab-up latch orientation, and full metallic shielding with external EMI tabs. Designed for space-constrained PCB layouts in smart home automation hubs, enterprise routers, network firewalls, set-top boxes, and single board computers (SBCs), this Gigabit Ethernet socket integrates signal conditioning transformers and common-mode chokes inside the connector housing, saving PCB real estate while shielding Ethernet PHY transceiver silicon from line-side electrical surges (0°C to +70°C).

Key Benefits of LINK-PP LPJG16320BENL RJ45 MagJack

  • Integrated Gigabit Isolation Magnetics: Combines the RJ45 female socket and 8-core 1CT:1CT signal conditioning magnetics into a single component, eliminating discrete transformer layouts and saving PCB real estate.
  • Integrated Green/Yellow Visual Diagnostics: Pre-assembled front-bezel Green (Left) and Yellow (Right) LEDs provide immediate visual status monitoring for link state and packet activity directly on equipment faceplates.
  • Onboard Bob Smith Termination (BST) & Auto-MDIX: Built-in BST circuit suppresses common-mode noise and cable EMI radiation, while supporting Auto-MDIX for seamless straight-through or crossover cable detection.
  • Robust EMI Shielding with External Grounding Tabs: Fully shielded metal housing equipped with external spring tabs establishes low-impedance grounding against chassis bezels for superior EMC performance.
  • Optimized Tab-Up Low-Profile Design: Height of 13.50mm [0.531 in] with tab-up orientation accommodates low-profile enclosure designs and automated board assembly workflows.
  • Multi-Source Drop-In Compatibility: Standard RJ45 MagJack footprint enables secondary sourcing strategies for commercial and embedded supply chain diversification.

1x1 Gigabit Integrated Magnetics Architecture & Schematics

Engineered in strict compliance with IEEE 802.3 100/1000 Base-T standards, the LINK-PP LPJG16320BENL integrates 8 transformer cores arranged in a 1CT:1CT transmit and receive turns ratio (1:1 ±5% across all 4 channels). The magnetics module provides 1500Vrms / 2250VDC galvanic isolation between the PHY layer and line side, protecting sensitive transceiver ICs against high-voltage common-mode transients, electrostatic discharge (ESD), and ground potential loops.

Tab-Up Side-Entry Profile & Green/Yellow Status LEDs

The right-angle (90° side entry) package features a compact height of 13.50mm [0.531 in] above the PCB, with a tab-up (latch up) orientation. Integrated Green (Left) and Yellow (Right) LEDs project status lighting directly to the front faceplate bezel, providing instant visual diagnostic feedback for link status, speed, and network packet activity.

Mechanical Alignment & PCB Assembly Integration

To ensure reliable automated board placement and mechanical durability under field operation, the LPJG16320BENL incorporates precision T-Post PCB retaining posts.

T-Post Retention & Gold-Plated Contact Options

The T-Post retaining pegs snap firmly into PCB locating holes, aligning the 10p8c solder pins precisely with plated through-holes (PTH) on standard FR4 circuit boards. The RJ45 contact mating area is available with 6µ", 15µ", or 30µ" gold plating options, providing low electrical contact resistance and superior oxidation resistance over 750+ mating cycles.

Commercial Reliability (0°C to +70°C) & Standards Compliance

Manufactured under certified ISO 9001 and ISO 14001 quality management processes, the LPJG16320BENL meets international environmental and safety mandates, including UL safety recognition, REACH compliance, and RoHS hazardous substance restrictions. Rated for commercial operating temperatures from 0°C to +70°C, it delivers continuous Gigabit throughput in smart home and commercial embedded systems.

Target Applications: Smart Home, Routers, Embedded Boards & Appliances

Combining Gigabit Ethernet performance, integrated magnetics, status LEDs, robust EMI shielding, and compact board-mount footprint, the LINK-PP LPJG16320BENL supports diverse embedded systems:

  • Smart Home & Building Automation: Ideal for smart home automation gateways, security control hubs, and connected HVAC terminals.
  • Enterprise Routers & Network Firewalls: Deployed in desktop routers, VPN firewall appliances, and broadband modems.
  • Single Board Computers (SBC) & Embedded IPCs: Used in commercial IPC motherboards, embedded development boards, and interactive kiosks.
  • Digital Media & Office Appliances: Suitable for set-top boxes, smart TVs, network printers, and IP security cameras.

How to Select and Verify an RJ45 MagJack Replacement

When evaluating or sourcing 1x1 Gigabit RJ45 connectors with integrated magnetics for new PCB designs or secondary-source qualification, hardware engineers should verify the following core parameters:

  • Ethernet PHY Speed & Transformer Cores: Confirm that internal magnetics support 10/100/1000 Base-T (8 cores, 1CT:1CT) and match your Ethernet PHY transceiver drive specifications.
  • Mechanical Footprint & Latch Orientation: Verify whether your front bezel cutout requires a Tab-Up (Latch Up) or Tab-Down profile and confirm side-entry right-angle mounting dimensions.
  • LED Configurations & Colors: Ensure Green/Yellow status LEDs match your system diagnostic firmware drive polarity.
  • Shielding & EMI Tabs: Confirm that external metallic EMI tabs match your chassis bezel grounding cutout to establish low transfer impedance grounding.
  • Cross-Reference Footprint Validation: Validate mechanical pin layouts, T-Post peg positions, and board hole drill diameters against official engineering drawings.

Frequently Asked Questions

What is LINK-PP LPJG16320BENL?

LINK-PP LPJG16320BENL is a single-port (1x1) 10/100/1000 Base-T Gigabit RJ45 MagJack connector featuring integrated isolation magnetics, Green/Yellow status LEDs, tab-up latch orientation, and external EMI shielding tabs. It is designed for smart home hubs, routers, firewalls, and embedded boards.

Is LINK-PP LPJG16320BENL compatible with TE Connectivity or Bel Fuse MagJacks?

Yes. LINK-PP LPJG16320BENL is engineered to match the exact mechanical footprint, pinout, 1CT:1CT turns ratio magnetics, Green/Yellow LEDs, and panel cutout dimensions of equivalent 1x1 Gigabit RJ45 MagJacks from TE Connectivity, Pulse Electronics, Bel Fuse, and Wurth Elektronik.

What are the advantages of integrated magnetics in RJ45 connectors?

Integrated magnetics (MagJacks) house the isolation transformers, common-mode chokes, and Bob Smith termination circuit directly inside the RJ45 housing. This saves critical PCB space, improves signal integrity, reduces EMI emissions, and protects PHY transceiver silicon from line-side ESD surges.

What operating temperature range is supported by LPJG16320BENL?

LINK-PP LPJG16320BENL is rated for a commercial operating temperature range of 0°C to +70°C, making it ideal for indoor smart home automation, enterprise routers, and commercial appliances.

What are the key mechanical features of LINK-PP LPJG16320BENL?

Key features include a 1x1 single-port right-angle side-entry layout, tab-up latch orientation, T-Post PCB retaining posts, external metallic EMI tabs, 10p8c contacts with gold plating, and integrated Green/Yellow status LEDs.

Are compatible replacement options available for LINK-PP LPJG16320BENL?

Yes, LINK-PP LPJG16320BENL is an industry-standard part with cross-reference compatibility. Hardware engineers should verify mechanical drawings, magnetics schematics, and LED drive polarities before final secondary-source qualification.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.