HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • MIC25010-5110.jpg
  • MIC25010-5110 WE.jpg
  • RB1-105B8A1F UDE.jpg
  • J0026D21NL Pulse.jpg
  • J0026D21NL.jpg

RB1-105B8A1F Compatible LINK-PP LPJ0026CNL 10/100 Base-T Tab Down Without Led Single Port RJ45 Ethernet Connector

P/N:

LPJ0026CNL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJ0026CNL

  • Number of Ports: 1X1
  • Speed: 10Base-T,100Base-TX
  • PoE: Non-PoE
  • Latch: Down
  • Mounting Type: THT
  • LED Option: No LEDs
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJ0026CNL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: RB1-105B8A1F

Packaging Details:

N.W/pCS:

0.007kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1200pcs

Carton size:

32*30*31cm

G.W/carton:

8.5kg

Product Specifications

LINK-PP Part Number: LPJ0026CNL Other Part Number RB1-105B8A1F
Part Status Active Connector Type Jack
Number of Positions/Contacts 8p8c (RJ45, Ethernet) Application-Lan Ethernet(NoN PoE)
Number of Ports 1x1 Port Speed 10/100 Base-T
Latch Down Cores per Port 5
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs With LED Option Without
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.528/13.40 Package Length (Inches/mm) 0.839/21.30
Package Width (Inches/mm) 0.626/15.90 Temperature 0 TO 70℃
Bst Circuit YES AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

RB1-105B8A1F Compatible LINK-PP LPJ0026CNL Fast Ethernet RJ45 Magjack Technical Overview

The LINK-PP LPJ0026CNL (engineered as a direct 100% pin-to-pin drop-in replacement for RB1-105B8A1F) is a single-port (1x1) Tab-Down non-LED female RJ45 Integrated Connector Module (ICM) with built-in 10/100 Base-T Fast Ethernet magnetics, EMI shield spring tabs, and a Bob Smith Termination (BST) circuit. Compliant with IEEE 802.3u standards, it integrates a 5-core transformer/choke matrix (1CT:1CT turns ratio), delivering 10/100 Mbps Fast Ethernet signal isolation, 1500Vrms isolation, ESD protection, and 360-degree panel grounding for Industrial PCs, network video recorders (NVR), streaming media players, and set-top boxes.

  • Fast Ethernet Magnetics Architecture: 8p8c RJ45 connector integrated with a 5-core magnetic matrix (1CT:1CT turns ratio) supporting 10/100BASE-TX communication over Cat5e/Cat6 wiring.
  • Non-LED Streamlined Housing Profile: Clean non-LED faceplate design eliminates optical light bleed in dark environments or enclosed chassis, with commercial thermal endurance (0°C to +70°C).
  • Built-In Circuit Protection & Noise Rejection: Features an integrated Bob Smith Termination (BST) network and Auto-MDIX logic for enhanced common-mode EMI suppression and automatic cable crossover detection.
  • Direct Cross-Reference Replacement: Fully qualified footprint and electrical drop-in replacement for RB1-105B8A1F for BOM cost optimization and secondary sourcing.

LINK-PP LPJ0026CNL Fast Ethernet Female RJ45 Magjack Connector Overview

LINK-PP LPJ0026CNL is a right-angle side-entry 1x1 Tab-Down non-LED female RJ45 integrated connector module (ICM) designed for non-PoE Fast Ethernet networking platforms. Housing signal transformers, common-mode chokes, and Bob Smith Termination directly inside a metal-shielded jack with EMI spring tabs, this connector simplifies motherboard layout by replacing discrete PHY magnetics. It provides a highly reliable, pin-compatible secondary-source alternative to RB1-105B8A1F in Industrial PCs, video recorders, streaming media players, set-top boxes, and commercial intercom systems.

Key Benefits of LINK-PP LPJ0026CNL / RB1-105B8A1F Compatible Magjack

  • Fully Integrated Magjack ICM Architecture (Reduces SMT Component Count): Consolidates discrete isolation transformers, common-mode chokes, resistors, and capacitors inside the RJ45 jack, reducing motherboard component count and SMT placement cycles.
  • Non-LED Housing Design Eliminates Optical Light Leakage: Streamlined enclosure profile without optical LEDs is ideal for dark-room video surveillance equipment, set-top boxes, and sealed industrial enclosures.
  • IEEE 802.3u 10/100BASE-TX Fast Ethernet Speed: Embeds a 5-core transformer and common-mode choke matrix that isolates and filters transmit/receive lines, ensuring clean Fast Ethernet eye diagrams with minimal differential insertion loss.
  • EMI Shield Tabs for Enhanced Panel Grounding: Outfitted with external EMI spring tabs on the metal shield frame that press tightly against chassis front panel cutouts, forming a low-impedance grounding loop to suppress radiated emissions.
  • Integrated Bob Smith Termination (BST) & Auto-MDIX: Built-in 75-ohm BST circuit routes common-mode EMI noise and ESD transients safely to ground, while Auto-MDIX logic supports automatic straight-through or crossover cable detection.
  • Direct Second Sourcing for RB1-105B8A1F: Identical 8p8c through-hole PCB land pattern and pinout allow seamless drop-in secondary sourcing to reduce procurement lead times.

Integrated Magnetics & 10/100BASE-TX Signal Architecture

The LINK-PP LPJ0026CNL utilizes an advanced Integrated Connector Module (ICM) architecture that embeds 10/100 Base-T magnetics directly behind the RJ45 contact pins, eliminating high-frequency noise radiation caused by long trace runs on the motherboard.

5-Core Fast Ethernet Transformer & Choke Configuration

Featuring a 1CT:1CT transmit and receive turns ratio with 5 magnetic cores per port, the LPJ0026CNL establishes 1500Vrms galvanic isolation between the Ethernet PHY transceiver chip and the external network cable. The 5-core layout provides precise impedance matching across transmit and receive differential pairs, suppressing inter-channel crosstalk and common-mode noise.

Bob Smith Termination (BST) & ESD Rejection

The integrated Bob Smith Termination (BST) network utilizes high-voltage capacitors and precision resistors to balance line impedance on unused cable pairs. This prevents common-mode noise reflection, reduces radiated EMI emissions, and enhances system ESD immunity during cable plugging.

PCB Mounting & Mechanical Specifications

Designed for automated Through-Hole Technology (THT) assembly, the LPJ0026CNL incorporates robust mechanical features to ensure structural integrity on FR4 substrates.

Tab-Down Latch Geometry & EMI Shield Tabs

With package dimensions of 13.40mm H x 21.30mm L x 15.90mm W, the LPJ0026CNL provides a compact footprint. The non-LED faceplate aligns cleanly with front-panel cutouts, while external EMI spring tabs establish 360-degree contact with the chassis faceplate, and T-Post mechanical pegs anchor the housing firmly to the motherboard during cable plugging.

Target Applications: Industrial PCs, Video Recorders, and Media Players

Combining IEEE 802.3u Fast Ethernet speed, BST noise suppression, EMI shield tabs, and RB1-105B8A1F compatibility, the LINK-PP LPJ0026CNL supports diverse embedded systems:

  • Industrial PCs (IPC) & Single Board Computers: Ideal for industrial single-board computers, embedded mainboard diagnostic ports, and automation controllers.
  • Network Video Recorders (NVR) & Video Surveillance: Deployed in security NVRs, IP surveillance gateways, and video recording hubs.
  • Streaming Media Players & Set-Top Boxes: Suitable for IP set-top boxes, commercial media players, and intercom gateways.

How to Select and Verify LPJ0026CNL vs. RB1-105B8A1F

Hardware design engineers and procurement specialists evaluating the LINK-PP LPJ0026CNL as a second-source replacement for RB1-105B8A1F should verify the following core parameters:

  • 5-Core Magnetics Compatibility: Confirm that a 5-core magnetic matrix and a 1CT:1CT turns ratio match your Fast Ethernet PHY transceiver reference design.
  • Non-LED Configuration Check: Verify that your system enclosure design does not rely on integrated LEDs inside the RJ45 jack housing.
  • Mechanical Latch & Footprint Alignment: Verify that the Tab-Down latch direction, 8p8c through-hole pin arrangement, and T-Post peg locations match the RB1-105B8A1F PCB land pattern.
  • Package Height & EMI Tab Clearance: Ensure that the 13.40mm package height and external EMI spring tabs fit within your front-panel bezel window.

Frequently Asked Questions

Is LINK-PP LPJ0026CNL compatible with RB1-105B8A1F?

Yes. LINK-PP LPJ0026CNL is a direct functional, electrical, and footprint drop-in replacement for RB1-105B8A1F, featuring the same 1x1 Tab-Down Fast Ethernet 10/100 Base-T Magjack layout without LEDs.

Does LINK-PP LPJ0026CNL support Fast Ethernet (10/100 Base-T)?

Yes. LPJ0026CNL is equipped with a 5-core magnetic matrix supporting 10/100BASE-TX Fast Ethernet data rates compliant with IEEE 802.3u standards.

Does LINK-PP LPJ0026CNL include integrated status LEDs?

No. LPJ0026CNL is a Non-LED RJ45 Magjack variant, designed for applications where visual LED status indicators are not required.

What is the function of the integrated Bob Smith Termination (BST) circuit in LPJ0026CNL?

The integrated Bob Smith Termination (BST) circuit utilizes built-in resistors and capacitors to balance line impedance on unused cable pairs, suppressing common-mode EMI noise and protecting the Ethernet PHY against ESD transients.

What contact gold plating options are available for LPJ0026CNL?

LINK-PP offers LPJ0026CNL with gold plating thickness options of Gold 6u", 15u", or 30u" in the contact mating area to meet different insertion durability and corrosion resistance specifications.

Is LINK-PP LPJ0026CNL a Power over Ethernet (PoE) connector?

No. LPJ0026CNL is a Non-PoE Fast Ethernet RJ45 Magjack designed strictly for Ethernet signal transmission and isolation without DC power delivery.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.