LPJ0190HENL RJ45 PoE Magjack 10P8C 10/100 Base-T Tab Down Green/Yellow Led
P/N:
LPJ0190HENL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJ0190HENL
- Compatible Brands: LINK-PP
- Number of Ports: 1X1
- Speed: 10Base-T,100Base-TX
- PoE: PoE
- Latch: Down
- Mounting Type: THT
- LED Option: Green / Yellow
- Shield EMI Tabs: NO
- Temperature: 0℃ to 70℃
- P/N: LPJ0190HENL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LPJ0190HENL
Packaging Details:
N.W/pCS:
0.007kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1200pcs
Carton size:
32*30*31cm
G.W/carton:
8.5kg
Product Specifications
| LINK-PP Part Number: | LPJ0190HENL | Connector Type | Jack |
| Part Status | Active | Mounting Type | Through Hole |
| Number of Positions/Contacts | 10p8c (RJ45, Ethernet) | Application-Lan | Ethernet(PoE) |
| Number of Ports | 1x1 Port | Speed | 10/100 Base-T |
| Latch | Down | Cores per Port | 4 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | SIDE ENTRY |
| Shield EMI Tabs | Without | LED Option | Green/Yellow Leds |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.528/13.40 | Package Length (Inches/mm) | 0.839/21.30 |
| Package Width (Inches/mm) | 0.626/15.90 | Temperature | 0 TO 70℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | Rectifier Diode | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
Product Overview
LINK-PP LPJ0190HENL is a single-port 10/100BASE-T RJ45 connector with integrated magnetics for PoE applications. It has a 10P8C interface, through-hole mounting, a Tab-Down latch and green/yellow LEDs.
The LP12051618 Rev A schematic shows separate PW+ and PW− terminals at PCB pins 9 and 10. Its rectifier network is part of the connector circuit; the powered device still needs the appropriate power management and protection circuitry.
Board and LED Connections
The drawing assigns the green LED to pins 11 and 12, and the yellow LED to pins 13 and 14. Observe the indicated polarity and provide current limiting in the host circuit. The top-view board layout also distinguishes the signal, shield and retaining-post holes.
The connector is specified for 0°C to 70°C operation. Its mechanical drawing gives a 13.40 mm body height and a side-entry profile; use the drawing dimensions and tolerances when fitting the connector and plug latch to a panel.
Frequently Asked Questions
Is LPJ0190HENL intended for PoE?
Yes. The product drawing identifies PoE use and shows a rectifier network with PW+ and PW− outputs. The complete powered-device power path must be selected for the intended system requirements.
Does the rectifier network replace a PoE controller?
No. The rectifier shown in the connector schematic does not replace the powered-device control, protection and power conversion required by the system.
Which PCB pins connect the status LEDs?
The schematic shows the green LED on pins 11 and 12 and the yellow LED on pins 13 and 14. Check polarity and select suitable current-limiting components.
What mounting arrangement does the connector use?
It is a through-hole, right-angle connector with a Tab-Down opening. Use the drawing’s recommended PCB hole pattern for signals, shield and retaining posts.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































