XFMRS XFVOIP5E-C1-4MS Compatible LINK-PP LPJ4514DNL 10/100 Base-T Tab Down Without Led 1 Port PCB POE RJ-45 Modular Jacks
P/N:
LPJ4514DNL
Manufacturer:
LINK-PP
Compatible Brand:
XFMRS
Compatible P/N:
LPJ4514DNL
- Compatible Brands: XFMRS
- Number of Ports: 1X1
- Speed: 10Base-T,100Base-TX
- PoE: PoE
- Latch: Down
- Mounting Type: THT
- LED Option: No LEDs
- Shield EMI Tabs: NO
- Temperature: -40℃ to +85°C
- P/N: LPJ4514DNL
- Manufacturer: LINK-PP
- Compatible Brand: XFMRS
- Compatible P/N: XFVOIP5E-C1-4MS
Packaging Details:
N.W/pCS:
0.007kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1200pcs
Carton size:
32*30*31cm
G.W/carton:
8.5kg
Product Specifications
| LINK-PP Part Number: | LPJ4514DNL | XFMRS Part Number | XFVOIP5E-C1-4MS |
| Part Status | Active | Connector Type | Jack |
| Number of Positions/Contacts | 10p8c (RJ45, Ethernet) | Application-Lan | Ethernet(PoE) |
| Number of Ports | 1x1 Port | Speed | 10/100 Base-T |
| Latch | Down | Cores per Port | 4 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | SIDE ENTRY |
| Shield EMI Tabs | Without | LED Option | Without |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.528/13.40 | Package Length (Inches/mm) | 0.839/21.30 |
| Package Width (Inches/mm) | 0.626/15.90 | Temperature | -40℃ TO 85℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
Product Engineering Overview
LINK-PP LPJ4514DNL is a single-port 10/100 Base-T RJ45 connector with integrated magnetics for PoE applications. The record lists a Tab-Down latch, no LEDs, through-hole mounting and a −40°C to +85°C operating range. Its side-entry layout places the mating port at the board edge.
Drawing LP10032008 Rev A shows a 15.90 × 21.30 × 13.40 mm body and describes a 600 mA DC PoE capability. Verify current paths, the applicable PoE specification and host power circuitry for the intended design.
Compatibility and Design Positioning
The product record positions LPJ4514DNL as a cross-reference and alternative sourcing option for XFMRS XFVOIP5E-C1-4MS. Before substitution compare the official drawings, PoE current paths, pinout, magnetic characteristics, footprint and panel geometry; the listing alone does not prove interchangeability.
Procurement and OEM Qualification
Request samples using the LINK-PP part number and applicable drawing revision. Confirm plating, packaging and lead time before AVL approval, then validate power and data operation and mechanical fit in the host equipment.
Topology and Physical Packaging
- Port: One RJ45 opening with integrated magnetics.
- Mounting: Side-entry, through-hole assembly with retaining features.
- Latch: Provide access to the Tab-Down plug release.
- Indicators: No integrated LEDs are listed.
- Shield: The record specifies a shield without external EMI tabs.
Magnetics and PoE Interface
Drawing LP10032008 Rev A specifies TX and RX turns ratios of 1CT:1CT and identifies a 1500 Vrms hi-pot test. It describes PoE and a 600 mA DC design rating but does not state a specific PoE class in the drawing. Confirm current rating, pin paths and the applicable standard with the manufacturer before selecting host power components. The product table says BST is present; confirm the implementation against the applicable schematic before relying on it.
Mechanical Envelope and PCB Layout Considerations
- Panel: Check plug and latch clearance at the board edge.
- Footprint: Match signal, shield and retaining holes to the drawing.
- PoE routing: Verify connector pin paths, trace current capacity and isolation clearances against the host design.
- Indicators: Provide external status indication if required; this connector has no LEDs.
Design Consideration Comparison
| Interface choice | Engineering consideration |
|---|---|
| PoE connector and magnetics | Confirm current rating, pin paths and host power architecture. |
| Non-PoE connector and magnetics | Select only for applications that do not require power over Ethernet. |
Application Considerations
| Target Application Profile | Primary Engineering Consideration |
|---|---|
| PoE network equipment | Check power current, isolation and the host power architecture. |
| 10/100 Ethernet hubs and switches | Verify PHY interface and board-edge port placement. |
| LAN-on-motherboard equipment | Check the complete footprint, shield and enclosure clearance. |
Engineering Verification Checklist
- Verify the 10/100 interface and transformer pinout against the PHY.
- Confirm the required PoE class and DC current path with the applicable documentation.
- Check board hole positions and fabrication tolerances.
- Test mating and latch access in the enclosure.
- Review shield connection and isolation clearances.
- Validate power, signal and temperature in the assembled system.
Frequently Asked Questions
Does LPJ4514DNL support Power over Ethernet?
The record and drawing identify PoE support; the drawing describes a 600 mA DC capability. Confirm the applicable IEEE PoE class and current path with the manufacturer and validate the complete host power design.
Can LPJ4514DNL replace XFVOIP5E-C1-4MS?
The record lists it as a cross-reference. Compare both official drawings and power, electrical and mechanical specifications, then qualify samples before substitution.
Does the connector include status LEDs?
The product record specifies no integrated LEDs. A host design requiring indicators must provide them separately.
What operating-temperature range is listed?
The component is specified for −40°C to +85°C. The finished equipment must be assessed separately.
What must be checked in the PCB layout?
Check all connector holes, shield connections and PoE power routes against the applicable drawing and the host design's current and isolation requirements.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































