HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJ0284GDNL (5).jpg
  • LPJ0284GDNL (2).jpg
  • LPJ0284GDNL (4).jpg
  • LPJ0284GDNL (3).jpg
  • LPJ0284GDNL (1).jpg

LPJ0284GDNL 10/100 Base-T PoE Modular Jack RJ45 Female Connector

P/N:

LPJ0284GDNL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJ0284GDNL

  • Compatible Brands: LINK-PP
  • Number of Ports: 1X1
  • Speed: 10Base-T,100Base-TX
  • PoE: PoE
  • Latch: Down
  • Mounting Type: THT
  • LED Option: Yellow / Green
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJ0284GDNL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LPJ0284GDNL

Packaging Details:

N.W/pCS:

0.007kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1200pcs

Carton size:

32*30*31cm

G.W/carton:

8.5kg

Product Specifications

LINK-PP Part Number: LPJ0284GDNL Connector Type Jack
Part Status Active Mounting Type Through Hole
Number of Positions/Contacts 10p8c (RJ45, Ethernet) Application-Lan Ethernet(PoE)
Number of Ports 1x1 Port Speed 10/100 Base-T
Latch Down Cores per Port 4
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs With LED Option Yellow/Green
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.524/13.30 Package Length (Inches/mm) 0.837/21.25
Package Width (Inches/mm) 0.627/15.93 Temperature 0℃ TO 70℃
Bst Circuit Yes AutomDX YES
Diodes Rectifier Diode Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

LINK-PP LPJ0284GDNL Technical Overview

The LINK-PP LPJ0284GDNL is a single-port (1x1) Tab-Down RJ45 Integrated Connector Module (ICM) with built-in 10/100BASE-TX Fast Ethernet magnetics, integrated Yellow/Green status LEDs, and internal full-wave rectifier diode bridges for Power over Ethernet (PoE) applications. Engineered with a 4-core magnetic assembly (1CT:1CT turns ratio), a Bob Smith Termination (BST) circuit, and a metal shield equipped with external EMI spring tabs, it simplifies motherboard power circuitry for PoE Powered Devices (PDs) across security cameras, access control systems, and VoIP hardware.

  • Integrated Rectifier Bridge Diodes: Internal diode bridges handle incoming PoE DC polarity correction directly inside the jack, eliminating discrete board-mounted bridge rectifiers.
  • PoE (IEEE 802.3af) Power Delivery: Supports simultaneous 10/100 Mbps Fast Ethernet data transmission and DC power feeding up to 15.4W.
  • Metal Shielding With EMI Spring Tabs: External EMI spring tabs establish multi-point grounding contact with chassis panel cutouts to attenuate electromagnetic radiation.
  • Integrated Yellow/Green Visual LEDs: Provides front-panel link speed and activity indication directly on the RJ45 jack faceplate.

Key Design Benefits

  • Integrated Diode Bridge Circuitry: Built-in rectifier diodes automatically correct PoE power polarity regardless of cable wiring (Mode A / Mode B), saving SMT component count and PCB space.
  • Integrated Chassis EMI Grounding: External EMI spring tabs ensure grounding continuity against the enclosure panel cutout, helping suppress radiated EMI.
  • Integrated Status Diagnostics: Embedded Yellow and Green LEDs enable direct visual link and activity diagnostics without requiring separate board-mounted light pipes.
  • Component Density Reduction: Consolidates isolation transformers, chokes, rectifier diodes, resistors, and capacitors into the RJ45 housing.
  • Supply Chain Continuity: Offers hardware engineering and procurement teams a high-reliability 1x1 PoE THT footprint option for secondary sourcing.

Integrated Magnetics & Electrical Architecture

The LPJ0284GDNL integrates 10/100BASE-TX Fast Ethernet magnetics directly behind the 10p8c contact pins, reducing the need for long differential trace runs to discrete magnetics on the motherboard.

4-Core Fast Ethernet Transformer Matrix

The integrated magnetic assembly utilizes a 4-core topology with a 1CT:1CT turns ratio across transmit and receive lines. This structure provides galvanic isolation between network cabling and the host Fast Ethernet PHY transceiver while suppressing common-mode noise across 10/100BASE-TX lines.

PoE Power Rectification & BST Circuitry

Internal diode bridges rectify incoming PoE power pairs before delivering DC power to the board-level PoE PD controller, while an integrated Bob Smith Termination network connects transformer center taps to ground to control common-mode noise.

Mechanical Specifications & PCB Layout

The LPJ0284GDNL features standard package dimensions of 13.30mm (H) x 15.93mm (W) x 21.25mm (L) [0.524 x 0.627 x 0.837 in]. The Tab-Down 90-degree right-angle side-entry profile aligns with standard board-edge connector layouts. Mechanical stability on FR4 substrates is reinforced by solderable T-Post PCB pegs, which absorb mechanical stress when Ethernet cables are attached.

Target Applications

  • PoE Powered Devices (PDs) & IP Cameras: Compact 10/100 Mbps RJ45 interface with integrated rectifier diodes for security cameras and smart surveillance terminals.
  • Access Control & Building Automation: Reliable Fast Ethernet data and power transmission for building intercom panels and card readers.
  • VoIP Phones & Network Terminals: Integrated PoE MagJack with visual status LEDs for desktop IP phones and small office networking equipment.

LINK-PP LPJ0284GDNL Design Verification Checklist

When evaluating the LINK-PP LPJ0284GDNL for new designs or secondary sourcing qualification, hardware engineers should verify the following parameters against their system specification:

  • PoE Rectifier Diode Integration: Confirm that your PoE Powered Device (PD) controller circuit layout accommodates internal diode bridge power rectification.
  • PoE Power Specification: Confirm that your circuit design requires IEEE 802.3af PoE (350mA) DC power delivery across Fast Ethernet differential pairs.
  • Shield EMI Tab Requirement: Verify that your front-panel bezel cutout requires external EMI spring tabs for chassis grounding contact.
  • PCB Footprint & Peg Layout: Verify that the standard 10p8c THT pin grid and T-Post peg locations match your PCB land pattern.

Frequently Asked Questions

What are the primary mechanical and electrical specs of the LINK-PP LPJ0284GDNL?

The LPJ0284GDNL is a single-port (1x1) Tab-Down 10/100BASE-T PoE RJ45 MagJack featuring integrated rectifier diodes, 4-core magnetics (1CT:1CT), Yellow/Green LEDs, external EMI spring tabs, 10p8c THT side-entry mounting, and a commercial operating temperature rating of 0°C to +70°C.

What is the technical advantage of integrated rectifier diodes in the LPJ0284GDNL?

Internal diode rectifier bridges automatically rectify DC power coming from PoE lines (Mode A or Mode B) regardless of cable polarity, eliminating the need for discrete bridge rectifiers on the motherboard and saving valuable SMT board real estate.

What engineering assets are available for LPJ0284GDNL PCB design-in?

LINK-PP provides complete design-in support assets, including 3D STEP models for mechanical enclosure clearance, 2D dimensional CAD drawings, PCB footprint land patterns for EDA software (Altium, Cadence, KiCad), and product specification sheets.

How can procurement and engineering teams request samples or a quotation for LINK-PP LPJ0284GDNL?

Procurement and engineering teams can contact LINK-PP to request LPJ0284GDNL evaluation samples for mechanical, electrical, and PCB compatibility verification. After qualification, our technical sales team can provide competitive pricing, production lead-time estimates, MOQ terms, and volume-order support.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.