HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJ16113BENL左绿右黄8p.jpg
  • 左绿右黄8p2(1713409931560).jpg
  • 左绿右黄8p1(1713409931483).jpg
  • LPJ16113BENL左绿右黄8p1.jpg
  • 左黄右绿8p1(1713409931442).jpg

KRU1S041X-43 LF Compatible LINK-PP LPJ16113BENL 10/100 Base-T Tab Up Green/Yellow Led Single Port 8P8C RJ-45 Female Connectors

P/N:

LPJ16113BENL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJ16113BENL

  • Number of Ports: 1X1
  • Speed: 10Base-T,100Base-TX
  • PoE: Non-PoE
  • Latch: Up
  • Mounting Type: THT
  • LED Option: Green / Yellow
  • Shield EMI Tabs: NO
  • Temperature: 0℃ to 70℃
  • P/N: LPJ16113BENL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: KRU1S041X-43 LF

Packaging Details:

N.W/pCS:

0.007kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1200pcs

Carton size:

32*30*31cm

G.W/carton:

8.5kg

Product Specifications

LINK-PP Part Number: LPJ16113BENL Part Number KRU1S041X-43 LF
Part Status Active Connector Type Jack
Number of Positions/Contacts 8p8c (RJ45, Ethernet) Application-Lan Ethernet( NoN PoE )
Number of Ports 1x1 Port Speed 10/100 Base-T
Latch UP Cores per Port 4
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs Without LED Option Green/Yellow Leds
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.530/13.45 Package Length (Inches/mm) 0.837/21.25
Package Width (Inches/mm) 0.628/15.95 Temperature 0℃ TO 70℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

KRU1S041X-43 LF Compatible LINK-PP LPJ16113BENL Fast Ethernet 10/100 Base-T RJ45 Female Connector Technical Overview

The LINK-PP LPJ16113BENL (engineered as a direct 100% pin-to-pin drop-in replacement for KRU1S041X-43 LF) is a single-port (1x1) Tab-Up female RJ45 Integrated Connector Module (ICM) with built-in 10/100 Base-T magnetics, Green/Yellow status LEDs, and a Bob Smith Termination (BST) circuit. Compliant with IEEE 802.3u standards, it integrates a 4-core transformer/choke matrix (1CT:1CT turns ratio), delivering 10/100 Mbps Fast Ethernet transmission, 1500Vrms isolation, ESD protection, and reliable mechanical board anchoring for Industrial PCs, fieldbus gateways, smart meters, and routers.

  • Fast Ethernet Magnetics Architecture: 8p8c RJ45 connector integrated with a 4-core magnetic matrix (1CT:1CT turns ratio) supporting 10/100BASE-TX communication over Cat5e/Cat6 wiring.
  • Built-In Circuit Protection & Noise Rejection: Features an integrated Bob Smith Termination (BST) network and Auto-MDIX logic for enhanced common-mode EMI suppression and automatic cable crossover detection.
  • Tab-Up Latch Geometry: Side-entry right-angle through-hole mounting with a Tab-Up mechanical latch and T-Post PCB retention pegs for stable board anchoring.
  • Direct Cross-Reference Replacement: Fully qualified footprint and electrical drop-in replacement for KRU1S041X-43 LF for BOM cost optimization and secondary sourcing.

LINK-PP LPJ16113BENL Fast Ethernet Female RJ45 Magjack Connector Overview

LINK-PP LPJ16113BENL is a right-angle side-entry 1x1 Tab-Up female RJ45 integrated connector module (ICM) designed for non-PoE Fast Ethernet networking platforms. Housing signal transformers, common-mode chokes, Green/Yellow visual status LEDs, and Bob Smith Termination directly inside a metal-shielded jack, this connector simplifies motherboard layout by replacing discrete PHY magnetics. It provides a highly reliable, pin-compatible secondary-source alternative to KRU1S041X-43 LF in Industrial PCs, fieldbus automation modules, smart grid energy gateways, and network firewalls.

Key Benefits of LINK-PP LPJ16113BENL / KRU1S041X-43 LF Compatible Magjack

  • Fully Integrated Magjack Architecture (ICM): Consolidates discrete isolation transformers, common-mode chokes, resistors, and capacitors inside the RJ45 jack, reducing motherboard component count and SMT placement cycles.
  • IEEE 802.3u 10/100BASE-TX Fast Ethernet Speed: Embeds a 4-core transformer and common-mode choke matrix that isolates and filters transmit/receive lines, ensuring clean Fast Ethernet eye diagrams with minimal differential insertion loss.
  • Integrated Bob Smith Termination (BST) & Auto-MDIX: Built-in 75-ohm BST circuit routes common-mode EMI noise and ESD transients safely to ground, while Auto-MDIX logic supports automatic straight-through or crossover cable detection.
  • Tab-Up Latch & T-Post PCB Retention: Tab-Up mechanical latch orientation aligns with standard front-panel enclosures, while T-Post mechanical pegs anchor the jack against vibration and cable insertion strain.
  • Customizable Gold Contact Plating: Available in Gold 6u", 15u", or 30u" plating thickness options to ensure low contact resistance and corrosion protection across 750+ mating cycles.
  • Direct Second Sourcing for KRU1S041X-43 LF: Identical 8p8c through-hole PCB land pattern and pinout allow seamless drop-in secondary sourcing to reduce procurement lead times.

Integrated Magnetics & 10/100BASE-TX Signal Architecture

The LINK-PP LPJ16113BENL utilizes an advanced Integrated Connector Module (ICM) architecture that embeds 10/100 Base-T magnetics directly behind the RJ45 contact pins, eliminating high-frequency noise radiation caused by long trace runs on the motherboard.

4-Core Fast Ethernet Transformer & Choke Configuration

Featuring a 1CT:1CT transmit and receive turns ratio with 4 magnetic cores per port, the LPJ16113BENL establishes 1500Vrms galvanic isolation between the Ethernet PHY transceiver chip and the external network cable. The 4-core layout provides precise impedance matching across transmit and receive differential pairs, suppressing inter-channel crosstalk and common-mode noise.

Bob Smith Termination (BST) & ESD Rejection

The integrated Bob Smith Termination (BST) network utilizes high-voltage capacitors and precision resistors to balance line impedance on unused cable pairs. This prevents common-mode noise reflection, reduces radiated EMI emissions, and enhances system ESD immunity during cable plugging.

PCB Mounting & Mechanical Specifications

Designed for automated Through-Hole Technology (THT) assembly, the LPJ16113BENL incorporates robust mechanical features to ensure structural integrity on FR4 substrates.

Tab-Up Latch Geometry & Package Dimensions

With package dimensions of 13.45mm H x 21.25mm L x 15.95mm W, the LPJ16113BENL provides a compact footprint. Integrated Green/Yellow LEDs provide clear visual link status and data activity diagnostics, while T-Post mechanical pegs anchor the housing firmly to the motherboard during cable plugging.

Target Applications: Industrial PCs, Fieldbus Systems, and Smart Meters

Combining IEEE 802.3u Fast Ethernet speed, BST noise suppression, Tab-Up geometry, and KRU1S041X-43 LF compatibility, the LINK-PP LPJ16113BENL supports diverse embedded systems:

  • Industrial PCs & Fieldbus Automation Modules: Ideal for DIN-rail industrial computers, Modbus/PROFINET fieldbus gateways, and programmable logic controllers (PLCs).
  • Smart Meters & Energy Management Gateways: Deployed in smart grid data concentrators, sub-metering communication cards, and remote terminal units (RTUs).
  • Network Routers & Industrial Firewalls: Suitable for commercial security firewalls, industrial Wi-Fi routers, and network gateways.

How to Select and Verify LPJ16113BENL vs. KRU1S041X-43 LF

Hardware design engineers and procurement specialists evaluating the LINK-PP LPJ16113BENL as a second-source replacement for KRU1S041X-43 LF should verify the following core parameters:

  • 4-Core Magnetics Compatibility: Confirm that a 4-core magnetic matrix and a 1CT:1CT turns ratio match your Fast Ethernet PHY transceiver reference design.
  • Mechanical Latch & Footprint Alignment: Verify that the Tab-Up latch direction, 8p8c through-hole pin arrangement, and T-Post peg locations match the KRU1S041X-43 LF PCB land pattern.
  • LED Option & Driving Polarity: Confirm that the Green/Yellow LED configuration and pin polarity match your host SMT LED driving circuit.
  • Package Height Clearance: Ensure that the 13.45mm package height fits within your front-panel bezel window.

Frequently Asked Questions

Is LINK-PP LPJ16113BENL compatible with KRU1S041X-43 LF?

Yes. LINK-PP LPJ16113BENL is a direct functional, electrical, and footprint drop-in replacement for KRU1S041X-43 LF, featuring the same 1x1 Tab-Up Fast Ethernet 10/100 Base-T Magjack layout and Green/Yellow LEDs.

Does LINK-PP LPJ16113BENL support Fast Ethernet (10/100 Base-T)?

Yes. LPJ16113BENL is equipped with a 4-core magnetic matrix supporting 10/100BASE-TX Fast Ethernet data rates compliant with IEEE 802.3u standards.

What is the latch orientation and mounting style of LPJ16113BENL?

LPJ16113BENL features a Tab-Up mechanical latch orientation with 90-degree right-angle side-entry through-hole (THT) mounting and a T-Post mechanical PCB retaining peg.

What is the function of the integrated Bob Smith Termination (BST) circuit in LPJ16113BENL?

The integrated Bob Smith Termination (BST) circuit utilizes built-in resistors and capacitors to balance line impedance on unused cable pairs, suppressing common-mode EMI noise and protecting the Ethernet PHY against ESD transients.

What contact gold plating options are available for LPJ16113BENL?

LINK-PP offers LPJ16113BENL with gold plating thickness options of Gold 6u", 15u", or 30u" in the contact mating area to meet different insertion durability and corrosion resistance specifications.

Is LPJ16113BENL a Power over Ethernet (PoE) connector?

No. LPJ16113BENL is a Non-PoE Fast Ethernet RJ45 Magjack designed strictly for Ethernet signal transmission and isolation without DC power delivery.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.