HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJ16206A42NL左黄右绿.jpg
  • 左黄右绿(1713346915168).jpg
  • 左黄右绿1(1713346915239).jpg
  • 8p(1713346915123).jpg
  • LPJ16206A42NL左黄右绿1.jpg

Tyco 5-6605706-2 Compatible LINK-PP LPJ16206A42NL 10/100 Base-T Tab Up Yellow/Green Led Single Port Jack RJ45 Keystone Module

P/N:

LPJ16206A42NL

Manufacturer:

LINK-PP

Compatible Brand:

Tyco

Compatible P/N:

LPJ16206A42NL

  • Compatible Brands: Tyco
  • Number of Ports: 1X1
  • Speed: 10Base-T,100Base-TX
  • PoE: Non-PoE
  • Latch: Up
  • Mounting Type: THT
  • LED Option: Yellow / Green
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJ16206A42NL
  • Manufacturer: LINK-PP
  • Compatible Brand: Tyco
  • Compatible P/N: 5-6605706-2

Packaging Details:

N.W/pCS:

0.007kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1200pcs

Carton size:

32*30*31cm

G.W/carton:

8.5kg

Product Specifications

LINK-PP Part Number LPJ16206A42NL Tyco Part Number Equivalent 5-6605706-2
Connector Type RJ45 MagJack (Integrated Magnetics) Part Status Active
Number of Positions/Contacts 8P8C (RJ45, Ethernet) Application-LAN Ethernet (Non-PoE)
Number of Ports Single Port (1×1) Speed 10/100BASE-T
Latch Orientation Up (Tab-Up) Cores per Port 5
Orientation 90° Angle (Right) PCB Mount Angle Side Entry (Through Hole)
Shield EMI Tabs With EMI Tabs LED Option Yellow / Green
PCB Material FR4 PCB Retaining Post T-Post
Package Height (Inches/mm) 0.530 / 13.45 Package Length (Inches/mm) 0.837 / 21.25
Package Width (Inches/mm) 0.628 / 15.95 Operating Temperature 0°C to +70°C (Commercial)
BST Circuit Yes AutoMDX Yes
Diodes No Contact Mating Area Plating Gold 6µ" / 15µ" / 30µ"
Turns Ratio (RX/TX) 1CT:1CT Configuration (RX/TX) T, C

Single-Port 10/100BASE-T RJ45 MagJack

The LINK-PP LPJ16206A42NL is a single-port 10/100BASE-T Fast Ethernet RJ45 integrated connector module (MagJack) in a right-angle, side-entry through-hole configuration. Designed with an internal 5-core magnetic structure, 1CT:1CT turns ratio, integrated Bob Smith termination (BST), and AutoMDX support, the connector supports IEEE 802.3-compliant Ethernet signal isolation and common-mode noise suppression across the specified 0°C to +70°C operating temperature range.

The mechanical assembly incorporates a Tab-Up latch orientation, perimeter shield EMI tabs, Yellow/Green status LEDs, and molded T-Post retaining pins. With a housing height of 13.45 mm, the LPJ16206A42NL provides a standardized physical interface suited for smart utility meters, solar inverters, commercial automation controllers, and digital video recorders.

Lifecycle: Active
Ethernet Speed: Single-Port 10/100BASE-T
Cross Reference: Tyco 5-6605706-2
Mounting & Latch: Through Hole (THT) / Tab-Up
Operating Temperature: 0°C to +70°C Commercial
Qualification Support: Sample Evaluation / Second Source

Compatibility and Design Positioning

The LINK-PP LPJ16206A42NL is positioned as a cross-reference and alternative sourcing option for the Tyco 5-6605706-2 single-port 10/100BASE-T RJ45 MagJack. The two devices share key characteristics including 8P8C through-hole construction, Tab-Up orientation, 1CT:1CT turns ratio, Yellow/Green LED configuration, and integrated Ethernet magnetics. Engineering teams should verify pin assignments, footprint dimensions, LED circuitry, and mechanical tolerances against the applicable official drawings before approving component substitution.

Procurement and OEM Qualification

For sourcing teams and OEM engineering programs evaluating the LPJ16206A42NL as a second-source or BOM alternative, key qualification parameters include PCB mechanical footprint, pinout alignment, LED drive characteristics, electrical isolation parameters, operating temperature rating, and expected volume demand. LINK-PP can support sample evaluation, mechanical drawing review, and documentation requirements for prototype validation, AVL qualification, and volume production planning.

Tab-Up Latch Topology and Enclosure Front-Panel Optimization

Integrating Fast Ethernet magnetics into a standardized Tab-Up connector format provides practical packaging and mechanical advantages for embedded systems:

  • Board-Edge Ergonomics: The Tab-Up latch positions the RJ45 plug release latch on the upper face, facilitating natural finger access from the top of the chassis without interference from the host PCB surface or bottom enclosure edges.
  • 13.45 mm Vertical Height: The specified housing height supports space-constrained board-edge and embedded hardware designs where enclosure clearance is limited.
  • 0°C to +70°C Commercial Operating Range: The 0°C to +70°C specification defines the stated operating temperature range of the connector assembly, supporting commercial computing, monitoring, and indoor automation systems.
  • Perimeter Shield EMI Tabs: Exterior spring tabs establish multi-point contact with the equipment front panel, assisting with chassis-level grounding and shielding continuity.
  • Mechanical T-Post Retention: Molded plastic posts help align the connector during assembly and distribute mechanical insertion and extraction stresses directly into the FR4 PCB substrate.

Internal Magnetics Architecture, 1CT:1CT Turns Ratio, and AutoMDX

The LPJ16206A42NL incorporates an internal 5-core magnetic architecture supporting Fast Ethernet communication. A symmetrical 1CT:1CT turns ratio across transmit and receive stages in a T, C configuration enables broad interface compatibility with standard voltage-mode and current-mode Fast Ethernet PHY transceivers.

The integrated magnetics include Bob Smith termination (BST) to help manage common-mode noise, while AutoMDX support enables automatic transmit/receive pair crossover detection. Electrical isolation is specified according to the applicable LINK-PP product documentation, separating PHY circuitry from line-side transients and cable common-mode noise.

Mechanical Envelope and PCB Layout Considerations

When integrating the LPJ16206A42NL into host hardware layouts, engineering teams should account for the following structural and electrical parameters:

1. Package Dimensions and Front-Panel Cutout

The connector body measures 13.45 mm (0.530 inches) in height, 21.25 mm (0.837 inches) in length, and 15.95 mm (0.628 inches) in width. Front-panel openings must be designed with appropriate clearances to allow unhindered deflection of the perimeter EMI spring tabs.

2. Tab-Up Latch Headroom

Because the release latch is oriented on the top face, designers should provide adequate vertical clearance above the connector port to ensure field technicians can easily depress the plug latch during servicing.

3. Through-Hole T-Post Anchoring

Molded T-Posts position the component securely on the PCB. Verification of drill hole diameters and tolerance spacing against the official footprint drawing is essential to ensure proper mechanical seating and solder joint reliability.

4. Status LED Circuitry

The connector features Yellow and Green status indicators. Hardware engineers should implement suitable series current-limiting resistors matching the host PHY LED driver polarity and target forward current specifications.

Design Consideration Comparison: Integrated MagJack vs. Discrete Solution

Design Consideration LPJ16206A42NL
Integrated Tab-Up MagJack
Discrete 10/100 Magnetics
+ Modular RJ45 Jack
Component Integration Magnetics and RJ45 connector integrated in one housing Separate magnetic transformer and modular RJ45 jack
PCB Assembly Operations Single through-hole placement Multiple placements (SMD transformer + through-hole jack)
Board-Edge Layout Consolidated footprint at board edge Requires trace routing between discrete magnetics and connector
Vertical Height Envelope Fixed 13.45 mm profile Variable based on selected modular jack profile
Front-Panel Shielding Integrated metal shield with perimeter EMI tabs Dependent on chosen external RJ45 shield design
Primary Engineering Focus Compact layout, unified assembly, standard Fast Ethernet I/O Custom physical placement flexibility across board zones

Application Considerations for LPJ16206A42NL

Target Application Profile Primary Engineering Consideration
Smart Utility Meters & Grid Gateways Consolidates Fast Ethernet magnetics and status LEDs into a compact footprint for automated meter reading (AMR) controllers.
Solar Inverters & Energy Management Systems Standard Tab-Up latch aligns with front-panel cutouts; perimeter shield tabs support chassis grounding and EMI control.
Factory Automation & Machine Controllers Integrated Bob Smith termination and 5-core magnetics support signal integrity in commercial automation equipment.
Video Recorders (NVR/DVR) & Security Hubs Yellow and Green LEDs provide visual indication for Ethernet link status and active data transmission.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials using the LPJ16206A42NL, hardware engineers should confirm the following design parameters against official documentation:

  • Footprint and Pinout Verification: Verify 8P8C pinout, LED pin locations, and T-Post drill sizes against the official LINK-PP LPJ16206A42NL drawing.
  • Tab-Up Headroom Clearance: Confirm that the enclosure cutout provides sufficient vertical clearance above the port for cable plug latch engagement and release.
  • LED Drive Polarity and Resistors: Check the host PHY LED driver configuration (active-high or active-low) and select appropriate series resistors for the Yellow and Green LEDs.
  • Chassis Grounding Path: Verify that the PCB shield pins connect to a low-impedance chassis ground plane to support front-panel EMI tab performance.
  • PHY Magnetics Compatibility: Confirm that the 1CT:1CT turns ratio and BST termination topology align with the transceiver manufacturer's reference schematic.
  • Thermal Environment: Ensure that the operating environment inside the equipment chassis remains within the specified 0°C to +70°C commercial temperature range.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LPJ16206A42NL?

The LPJ16206A42NL is a single-port 10/100BASE-T Fast Ethernet RJ45 MagJack. It features an 8P8C contact configuration, 5-core internal magnetics, 1CT:1CT turns ratio, Tab-Up latch orientation, side-entry through-hole mounting, Yellow/Green LEDs, integrated BST circuit, AutoMDX support, and an operating temperature range of 0°C to +70°C.

Is the LINK-PP LPJ16206A42NL compatible with the Tyco 5-6605706-2?

The LPJ16206A42NL is positioned as a cross-reference and alternative sourcing option for the Tyco 5-6605706-2. Both devices share matching 8P8C pinouts, 1CT:1CT turns ratios, Tab-Up latch profiles, Yellow/Green LED configurations, and through-hole PCB footprints. Engineering teams should cross-reference official product drawings before volume changeovers.

What is the function of the internal 5-core magnetics architecture?

The LPJ16206A42NL uses a 5-core integrated magnetic architecture for 10/100BASE-T Ethernet signal isolation and common-mode noise control. The detailed transformer and choke construction should be referenced to the applicable LINK-PP electrical documentation.

How does the Tab-Up latch orientation affect board-edge mechanical design?

A Tab-Up latch positions the RJ45 plug release latch on the upper face of the connector. This orientation is standard for motherboard and daughtercard designs where the PCB is mounted close to the enclosure floor, allowing users to press the latch from above without interference from the chassis lip.

How are the Yellow and Green LEDs driven on the host PCB?

The connector includes separate Yellow and Green status indicators. The LED functions should be configured according to the host PHY reference design and the connector's electrical specifications. Depending on the selected LED control scheme, the indicators may be used for link speed, link status, or activity indication.

Is the LPJ16206A42NL suitable for Power over Ethernet (PoE) applications?

No. The LPJ16206A42NL is specified as a Non-PoE connector for data-only Fast Ethernet interfaces. For applications requiring PoE power delivery, a connector and magnetics solution specifically rated for the required PoE standard and DC current conditions should be selected.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.