HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJ0012NDNL-01.webp
  • LPJ0012NDNL-02.webp
  • LPJ0012NDNL-03.webp
  • LPJ0012NDNL-04.webp
  • LPJ0012NDNL-05.webp

LPJ0012NDNL 10/100 Base-T Tab Down Yellow/Green Led 1x1 Port Unshielded RJ45 Jack

P/N:

LPJ0012NDNL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJ0012NDNL

  • Compatible Brands: LINK-PP
  • Number of Ports: 1X1
  • Speed: 10Base-T,100Base-TX
  • PoE: Non-PoE
  • Latch: Down
  • Mounting Type: THT
  • LED Option: Yellow / Green
  • Shield EMI Tabs: NO
  • Temperature: 0℃ to 70℃
  • P/N: LPJ0012NDNL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LPJ0012NDNL

Packaging Details:

N.W/pCS:

0.009kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1000pcs

Carton size:

32*30*31cm

G.W/carton:

8.5kg

Product Specifications

LINK-PP Part Number: LPJ0012NDNL Connector Type Jack
Part Status Active Mounting Type Through Hole
Number of Positions/Contacts 8p8c (RJ45, Ethernet) Application-Lan Ethernet( NoN PoE )
Number of Ports 1x1 Port Speed 10/100 Base-T
Latch Down Cores per Port 4
Orientation 90° Angle (Right) PCB Mount Angle

SIDE ENTRY

Shield EMI Tabs Without LED Option

Yellow/Green Leds

PCB FR4 PCB Retaining Post

T POST

Package Height (Inches/mm) 0.504/12.80 Package Length (Inches/mm)

0.811/20.6

Package Width (Inches) 0.608/15.45 Temperature

0℃ TO 70℃

Bst Circuit Yes AutomDX

YES

Diodes No Contact Mating Area Plating

GOLD 6u"/15u"/30u"

Turns Ratio RX/TX 1CT:1CT Configuration RX/TX

T,C

10/100 Base-T Unshielded RJ45 Jack

The LINK-PP LPJ0012NDNL is a single-port unshielded 10/100 Base-T 8P8C RJ45 jack with a right-angle side-entry through-hole configuration. The specified design uses a Tab-Down latch, Yellow/Green LEDs, an FR4 PCB, four cores per port, integrated BST, and AutoMDX support.

The specified package dimensions are 12.80 mm in height, 20.6 mm in length, and 15.45 mm in width. The component is identified for Non-PoE Ethernet applications and a 0℃ to 70℃ operating temperature range.

Lifecycle: Active
Speed/Interface: 10/100 Base-T / 8P8C RJ45
PoE: Non-PoE
Mounting/Latch: Through Hole / Tab-Down
Temperature: 0℃ to 70℃
LED/Shield: Yellow/Green LEDs / Without EMI tabs

Design Positioning and Qualification

The LPJ0012NDNL is positioned for Ethernet designs requiring an unshielded, single-port 10/100 Base-T RJ45 jack with Tab-Down latch orientation and through-hole mounting. No third-party cross-reference is asserted. Verify the official drawing, footprint, pin assignment, LED circuitry, enclosure clearance, and product documentation before production.

Procurement and OEM Qualification

Qualification should include sample evaluation, mechanical drawing review, PCB footprint and pinout verification, LED drive compatibility, temperature review, and AVL approval before volume production.

Topology and Physical Packaging

  • Interface: 1x1 8P8C RJ45 port for 10/100 Base-T Ethernet.
  • Mounting: Right-angle, side-entry through-hole construction.
  • Latch: Tab-Down orientation requires suitable release clearance.
  • Envelope: Confirm the 12.80 mm, 20.6 mm, and 15.45 mm package dimensions.
  • Indicators: Yellow/Green LED wiring follows the host PHY design.

Internal Electrical Architecture

The specification identifies four cores per port, a 1CT:1CT RX/TX turns ratio, T,C configuration, BST, AutoMDX, and no diodes. Electrical limits not shown in the specification should be verified in the applicable documentation.

Mechanical Envelope and PCB Layout Considerations

  1. Footprint: Verify the through-hole pad layout and T-post drill requirements.
  2. Latch clearance: Provide operating space for the Tab-Down release direction.
  3. Board edge: Confirm side-entry alignment with the enclosure opening.
  4. LED routing: Match LED polarity and current requirements to the host PHY design.

Design Consideration Comparison

Design Consideration LPJ0012NDNL Alternative Configuration
Mounting Through Hole Model-dependent
Port arrangement 1x1 Model-dependent
PoE status Non-PoE Configuration-dependent

Application Considerations

Target Application Profile Primary Engineering Consideration
Embedded Ethernet equipment Verify 10/100 Base-T and Non-PoE system requirements.
Industrial control electronics Confirm the 0℃ to 70℃ component rating.
Compact network devices Check Tab-Down, side-entry, and enclosure clearance.

Engineering Verification Checklist

  • Pinout and footprint: Verify against the official drawing.
  • Mechanical envelope: Confirm package dimensions and clearances.
  • LED drive: Confirm Yellow/Green LED polarity and current.
  • PoE status: Confirm the host design is Non-PoE.
  • Temperature: Confirm the environment remains within 0℃ to 70℃.
  • Qualification: Complete sample and AVL approval.

Frequently Asked Questions

What are the primary specifications?

The LPJ0012NDNL is a 1x1 unshielded 10/100 Base-T 8P8C RJ45 jack with through-hole mounting, Tab-Down latch, Yellow/Green LEDs, BST, AutoMDX, and a 0℃ to 70℃ rating.

Is it a PoE product?

The available specification identifies it as Non-PoE. Confirm the system requirement against the applicable documentation.

What should be checked before production?

Verify the footprint, pinout, LED circuitry, enclosure clearance, temperature range, and qualification documentation.

Can this part be used as a direct PCB replacement?

Do not assume direct replacement from the product name or interface alone. Verify the footprint, pin assignment, LED circuitry, enclosure clearance, and the applicable official drawing before substitution.

What should engineers verify for the Tab-Down and side-entry design?

Confirm plug release clearance, board-edge alignment, T-post locations, and the stated package dimensions in the host assembly.

What documentation is recommended before volume production?

Review the official drawing, confirm samples and electrical requirements, and complete qualification and AVL approval before production release.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.