HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • RJP-003TC1.jpg
  • RJP-003TC1 Amphenol.jpg
  • rj45 jack with magnetics(1713231847996).jpg
  • jack rj45(1713231847993).jpg
  • rj45 magnetic jack.jpg

LPJ4284CNL PoE MagJack RJ45 With Rectifier Diode 10/100 Base-T Tab Down Without Led

P/N:

LPJ4284CNL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJ4284CNL

  • Compatible Brands: LINK-PP
  • Number of Ports: 1X1
  • Speed: 10Base-T,100Base-TX
  • PoE: Non-PoE
  • Latch: Down
  • Mounting Type: THT
  • LED Option: No LEDs
  • Shield EMI Tabs: YES
  • Temperature: -40℃ to +85°C
  • P/N: LPJ4284CNL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LPJ4284CNL

Packaging Details:

N.W/pCS:

0.007kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1200pcs

Carton size:

32*30*31cm

G.W/carton:

8.5kg

Product Specifications

LINK-PP Part Number: LPJ4284CNL Connector Type Jack
Part Status Active Mounting Type Through Hole
Number of Positions/Contacts 8p8c (RJ45, Ethernet) Application-Lan Ethernet(PoE)
Number of Ports 1x1 Port Speed 10/100 Base-T
Latch Down Cores per Port 4
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs With LED Option Without
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.524/13.30 Package Length (Inches/mm) 0.837/21.25
Package Width (Inches/mm) 0.627/15.93 Temperature -40 TO +85℃
Bst Circuit YES AutomDX YES
Diodes Rectifier Diode Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

LINK-PP LPJ4284CNL Single Port PoE 10/100 Base-T Non-LED RJ45 Magjack Technical Overview

The LINK-PP LPJ4284CNL is an industrial-grade single-port (1x1) Tab-Down non-LED RJ45 Integrated Connector Module (ICM) with built-in PoE rectifier diodes, 10/100 Base-T magnetics, EMI shield spring tabs, and a Bob Smith Termination (BST) circuit. Compliant with IEEE 802.3af PoE standards, it integrates internal bridge rectifier diodes for automated DC power polarity correction and a 4-core transformer/choke matrix (1CT:1CT turns ratio), delivering 10/100 Mbps Fast Ethernet transmission, 1500Vrms isolation, ESD protection, and extended thermal endurance (-40°C to +85°C) for video recorders, solar inverters, set-top boxes, and intercom gateways.

  • Integrated PoE Rectifier Diode Bridge: Internal bridge rectifier diodes automatically rectify incoming DC supply voltage from PoE PSE lines (Alternative A or Alternative B), eliminating external diode bridges on host Powered Device (PD) PCBs.
  • Fast Ethernet Magnetics Architecture: 8p8c RJ45 connector integrated with a 4-core magnetic matrix (1CT:1CT turns ratio) supporting 10/100BASE-TX communication over Cat5e/Cat6 wiring.
  • Built-In Circuit Protection & Noise Rejection: Features an integrated Bob Smith Termination (BST) network and Auto-MDIX logic for enhanced common-mode EMI suppression and automatic cable crossover detection.
  • Industrial Temperature Endurance & Non-LED Profile: Certified for an extended operating temperature range of -40°C to +85°C (-40°F to +185°F) with a clean, non-LED housing profile that eliminates light leakage.

LINK-PP LPJ4284CNL PoE RJ45 Magjack Connector Overview

LINK-PP LPJ4284CNL is a right-angle side-entry 1x1 Tab-Down non-LED RJ45 integrated connector module (ICM) designed for Power over Ethernet (PoE IEEE 802.3af) platforms. Housing signal transformers, common-mode chokes, Bob Smith Termination, and internal diode rectifiers within a metal-shielded jack with EMI spring tabs, this module simplifies motherboard layout by eliminating discrete diode bridges and PHY magnetics. It provides a highly reliable, space-saving solution for network video recorders (NVR), solar inverters, IP media players, set-top boxes, and intercom gateways.

Key Benefits of LINK-PP LPJ4284CNL PoE RJ45 Connector

  • Built-in Diode Bridge for Automated PoE Polarity Correction: Features internal rectifier diodes that handle DC power extraction over Ethernet pairs (IEEE 802.3af), allowing Powered Devices (PD) to accept power regardless of cable polarity without discrete external diode bridges on the motherboard.
  • Fully Integrated ICM Architecture: Embeds 4-core 10/100 Base-T isolation transformers, common-mode chokes, resistors, and capacitors inside the metal shield frame, reducing SMT component count and board footprint.
  • Industrial Operating Temperature Range (-40°C to +85°C): Built with high-grade FR4 substrate and durable housing to withstand severe thermal fluctuations in unconditioned outdoor equipment and industrial control cabinets.
  • Non-LED Housing Design Eliminates Light Leakage: Streamlined enclosure profile without optical LEDs is ideal for dark-room surveillance equipment, set-top boxes, and sealed outdoor enclosures where status LEDs are prohibited or unnecessary.
  • EMI Shield Tabs for Enhanced Panel Grounding: Outfitted with external EMI spring tabs on the metal shield that press tightly against chassis front panel cutouts, forming a low-impedance grounding loop to suppress radiated emissions.
  • Customizable Gold Contact Plating: Available in Gold 6u", 15u", or 30u" plating thickness options to ensure low contact resistance and corrosion protection across 750+ mating cycles.

Integrated Rectifier Diode & PoE Circuit Architecture

The LINK-PP LPJ4284CNL utilizes an advanced PoE Integrated Connector Module (ICM) architecture that embeds both high-frequency signal isolation magnetics and DC power rectification components directly behind the RJ45 contacts.

Built-in Diode Bridge for Powered Device (PD) Applications

In Power over Ethernet (IEEE 802.3af) systems, Power Sourcing Equipment (PSE) may deliver DC voltage via Alternative A (data pairs 1-2 and 3-6) or Alternative B (spare pairs 4-5 and 7-8) with positive or reverse polarity. The integrated rectifier diodes inside the LPJ4284CNL automatically rectify the incoming DC power, routing positive and negative supply rails correctly to the internal PD controller chip while eliminating up to 8 discrete SMD diodes on the main PCB.

4-Core Fast Ethernet Magnetics & Isolation

Featuring a 1CT:1CT transmit and receive turns ratio with 4 magnetic cores per port, the LPJ4284CNL provides 1500Vrms galvanic isolation between the PHY transceiver chip and the external network cable. The internal transformer windings are rated to handle PoE DC bias currents without magnetic core saturation, maintaining low insertion loss and clean Fast Ethernet eye diagrams.

PCB Mounting & Mechanical Specifications

Designed for automated Through-Hole Technology (THT) assembly on FR4 substrates, the LPJ4284CNL incorporates robust mechanical features for industrial environments.

Tab-Down Latch Geometry & EMI Shield Tabs

Equipped with side-entry right-angle pins, a Tab-Down latch, and a non-LED faceplate, the module aligns cleanly with front-panel cutouts. The metal shield features dedicated EMI spring tabs that establish 360-degree contact with the chassis faceplate, while T-Post mechanical pegs anchor the jack against vibration and cable pull forces.

Target Applications: Video Recorders, Solar Inverters, and Intercoms

Combining IEEE 802.3af PoE compliance, internal rectifier diodes, 10/100 Base-T magnetics, and industrial thermal endurance (-40°C to +85°C), the LINK-PP LPJ4284CNL supports diverse embedded systems:

  • Network Video Recorders (NVR) & IP Media Players: Ideal for security video recorders, streaming media devices, and IP surveillance gateways requiring PoE power.
  • Solar Inverters & Photovoltaic (PV) Gateways: Deployed in solar power inverter communications boards, solar data loggers, and PV grid monitoring gateways operating in severe outdoor temperatures.
  • Intercom Systems & Set-Top Boxes: Suitable for IP door intercoms, emergency call stations, commercial set-top boxes, and game controllers.

How to Select and Verify LINK-PP LPJ4284CNL RJ45 Magjack

Hardware design engineers and procurement specialists evaluating the LINK-PP LPJ4284CNL for new designs or second-source qualification should verify the following core parameters:

  • Integrated Rectifier Diode Circuitry: Ensure your Powered Device (PD) power supply architecture relies on internal diode bridge rectification provided inside the Magjack.
  • PoE Rating & Turns Ratio: Confirm that IEEE 802.3af PoE power levels and the 1CT:1CT magnetics turns ratio satisfy your PHY transceiver reference design.
  • Non-LED Configuration Check: Verify that your system enclosure design does not rely on integrated LEDs inside the RJ45 jack housing.
  • Operating Temperature Requirements: Confirm that the -40°C to +85°C industrial temperature envelope satisfies your product's environmental specification.

Frequently Asked Questions

What is LINK-PP LPJ4284CNL?

LINK-PP LPJ4284CNL is a single-port (1x1) Tab-Down non-LED RJ45 Magjack featuring integrated PoE (IEEE 802.3af) magnetics, internal bridge rectifier diodes, EMI shield tabs, an integrated Bob Smith Termination circuit, and an operating temperature range of -40°C to +85°C.

What is the purpose of the integrated rectifier diodes in LPJ4284CNL?

The integrated rectifier diode bridge automatically rectifies incoming DC supply voltage from PoE lines (IEEE 802.3af Alternative A or Alternative B), ensuring proper DC power polarity to the internal PD controller while eliminating discrete external diodes on the motherboard.

What PoE standards are supported by LPJ4284CNL?

LINK-PP LPJ4284CNL is fully compliant with IEEE 802.3af Power over Ethernet (PoE) standards, delivering DC power alongside 10/100 Mbps Fast Ethernet data transmission.

What is the operating temperature range of LPJ4284CNL?

LINK-PP LPJ4284CNL is rated for an industrial operating temperature range of -40°C to +85°C (-40°F to +185°F), making it suitable for unconditioned outdoor equipment and solar inverter installations.

Does LINK-PP LPJ4284CNL include integrated status LEDs?

No. LPJ4284CNL is a Non-LED RJ45 Magjack variant, designed for applications where visual LED status indicators are not required.

What is the function of the integrated Bob Smith Termination (BST) circuit in LPJ4284CNL?

The integrated Bob Smith Termination (BST) circuit utilizes built-in resistors and capacitors to balance line impedance on unused cable pairs, suppressing common-mode EMI noise and protecting the Ethernet PHY against ESD transients.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.