HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LS-MM8525-S1C-1.jpg
  • LS-MM8525-S1C.jpg
  • LS-MM8525-S1C-2.jpg
  • LS-MM8525-S1C-3.jpg
  • LS-MM8525-S1C-4.jpg

LS-MM8525-S1C 25Gb/s SFP28 100m 850nm MMF DOM Duplex LC Optical Transceiver Module

P/N:

LS-MM8525-S1C

Manufacturer:

LINK-PP

Classification:

Compatible Brand:

LINK-PP

Compatible P/N:

LS-MM8525-S1C

  • Compatible Brands: LINK-PP
  • Form Factor: SFP28
  • Data Rate: 25G
  • Distance: ≤100m
  • Type: Multimode
  • Connector: Duplex LC
  • Model: SR
  • Wavelength: 850nm
  • P/N: LS-MM8525-S1C
  • Manufacture: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LS-MM8525-S1C

Product Specifications

LINK-PP Part Number LS-MM8525-S1C Vendor Name LINK-PP
Form Factor SFP28 Max Data Rate 25Gbps
Wavelength 850nm Max Cable Distance 100m@OM4/70m@OM3
Connector Duplex LC Media MMF
Transmitter Type VCSEL Receiver Type PIN
Power Consumption ≤3.3W Extinction Ratio >2dB
DDM/DOM Supported Case Temperature range 0°C to +70°C
TX Power -8.4~2.4dBm Minimum Receiver Power <-10.3dBm
Powerbudget 1.9dB Receiver Overload 2.4dBm
DDM/DOM Supported FEC Function Support RS-FEC, FC FEC
Protocols SFF-8472, SFF-8024, SFF-8431, SFF-8432 Warranty 5 Years

LINK-PP LS-MM8525-S1C Technical Overview

The LINK-PP LS-MM8525-S1C is a hot-pluggable 25Gbps SFP28 optical transceiver module engineered for short-reach 25GBASE-SR Ethernet, telecom transmission, and 5G wireless fronthaul optical links. Operating at a nominal wavelength of 850nm over multimode fiber (MMF), it supports link distances up to 100 meters on OM4 MMF or 70 meters on OM3 MMF via a Duplex LC/UPC connector. Built with an 850nm VCSEL transmitter, a high-sensitivity PIN photodiode receiver, integrated Digital Optical Monitoring (DOM/DDM) per SFF-8472, and support for Forward Error Correction (RS-FEC / FC-FEC), it enables a 2.5x throughput upgrade over existing 10G fiber cabling infrastructure.

  • 25 Gbps High-Throughput Performance: Delivers 25.78 Gbps line rate for 25GBASE-SR Ethernet, 5G eCPRI, and CPRI wireless fronthaul architectures.
  • 850nm VCSEL & Multimode Reach: Operates over standard MMF cabling, supporting up to 100m on OM4 or 70m on OM3 fiber for data center interconnects.
  • Forward Error Correction (FEC) Integration: Fully compatible with host-side Reed-Solomon FEC (RS-FEC) and Firecode FEC (FC-FEC) per IEEE 802.3by specifications.
  • Digital Optical Monitoring (DOM/DDM): Real-time monitoring of transmitted/received optical power, laser bias current, module temperature, and supply voltage per SFF-8472.

Key Design Benefits

  • 2.5x Bandwidth Density Upgrade: Quad-rate capability delivers 25 Gbps throughput over the same physical SFP form factor and multimode fiber plant used for legacy 10G links.
  • Broad FEC Protocol Compatibility: Operates reliably with host-enabled RS-FEC (IEEE 802.3 Clause 108) or FC-FEC (Clause 74) to maintain ultra-low bit error rates (BER).
  • Real-Time DOM Diagnostics: Internal digital diagnostics interface (DOM) allows network administrators to monitor live optical power levels and thermal parameters in real time.
  • Hot-Pluggable SFP28 MSA Form Factor: Enables module insertion and replacement in active switch, server NIC, or router line cards without interrupting host power.
  • Long-Term Reliability: Backed by a 5-year warranty and compliant with Class 1 laser safety standards (IEC 60825-1) and RoHS directives.

Optical Architecture & Diagnostic Performance

The LS-MM8525-S1C integrates electro-optical subsystems directly within a metallic SFP28 enclosure to ensure high signal integrity across 25Gbps optical channels.

Transmitter & Receiver Subsystems

The transmitter incorporates an 850nm VCSEL driver supplying -8.4 to +2.4 dBm optical launch power with an extinction ratio greater than 2 dB. The receiver incorporates a PIN photodiode with an integrated trans-impedance preamplifier (TIA) providing < -10.3 dBm sensitivity and a 2.4 dBm overload threshold across 25.78 Gbps data streams.

Forward Error Correction (FEC) & Signal Integrity

Designed to work in conjunction with host PHY retimers and switch processors supporting RS-FEC (528,514) and FC-FEC, ensuring error-free transmission across the full 100m OM4 link budget.

Digital Diagnostic Monitoring (DOM)

An SFF-8472 compliant MCU control unit monitors real-time operational parameters over a 2-wire serial interface, reporting transmitted optical power, received optical power, laser bias current, module operating temperature, and internal supply voltage.

Mechanical & Interface Specifications

The LS-MM8525-S1C is enclosed in a standard metal SFP28 housing featuring an ergonomic pull-tab latching mechanism for secure insertion and removal. The optical interface uses an industry-standard Duplex LC/UPC receptacle compatible with multimode fiber (OM3/OM4 MMF) patch cables. The module operates within a commercial temperature range of 0°C to 70°C and carries a 5-year warranty.

Target Applications

  • 25GBASE-SR Top-of-Rack (ToR) Interconnects: High-density 25 Gbps server-to-switch uplinks in enterprise data centers and cloud computing clusters.
  • 5G eCPRI & CPRI Wireless Fronthaul: Optical links between outdoor Remote Radio Units (RRU) and centralized Baseband Units (BBU).
  • Enterprise Campus Core & Storage Fabrics: High-throughput 25G MMF connectivity for high-performance computing (HPC) and NVMe-over-Fabrics (NVMe-oF) storage networks.

LINK-PP LS-MM8525-S1C Design Verification Checklist

When evaluating the LINK-PP LS-MM8525-S1C for network upgrades or secondary sourcing qualification, network engineers should verify the following parameters against their system specification:

  • Optical Wavelength & Fiber Reach: Confirm 850nm wavelength and multimode fiber infrastructure (up to 70m on OM3 or 100m on OM4 MMF).
  • Host Port FEC Configuration: Confirm that the target switch or NIC port supports IEEE 802.3by 25G RS-FEC or FC-FEC mode as required by the link.
  • Optical Link Budget: Verify that TX power (-8.4 to +2.4 dBm) and RX sensitivity (< -10.3 dBm) satisfy system link attenuation requirements without exceeding the 2.4 dBm receiver overload threshold.
  • Switch SFP28 Port Compatibility: Confirm that target switch or router line cards support SFP28 25Gbps line rates and SFF-8472 DOM protocols.

Frequently Asked Questions

What are the primary optical specifications and maximum reach of the LINK-PP LS-MM8525-S1C?

The LS-MM8525-S1C is a 25Gbps SFP28 optical transceiver operating at 850nm over multimode fiber (MMF), supporting transmission distances up to 100 meters on OM4 fiber or 70 meters on OM3 fiber via a Duplex LC connector. It features an 850nm VCSEL transmitter (-8.4 to +2.4 dBm), a PIN receiver (< -10.3 dBm sensitivity), and full DOM support.

Does the LS-MM8525-S1C require Forward Error Correction (FEC) on host switch ports?

Yes. In accordance with IEEE 802.3by standards for 25GBASE-SR, host switch and network interface card (NIC) ports typically require Reed-Solomon Forward Error Correction (RS-FEC / Clause 108) or Firecode FEC (FC-FEC / Clause 74) enabled to ensure optimal signal integrity and reach up to 100 meters.

What engineering assets and switch compatibility documentation are available for the LS-MM8525-S1C?

LINK-PP provides complete technical documentation, including product datasheets, EEPROM coding compatibility tables for major switch vendors, 3D STEP models, RoHS compliance certificates, and Class 1 laser safety documentation.

How can procurement and engineering teams request samples or a quotation for LINK-PP LS-MM8525-S1C?

Procurement and engineering teams can contact LINK-PP to request LS-MM8525-S1C evaluation samples for optical, electrical, and switch compatibility verification. After qualification, our technical sales team can provide competitive pricing, production lead-time estimates, MOQ terms, and volume-order support.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

25G SFP28 Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify LS-MM8525-S1C compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

25G SFP28 Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

SFP Download