HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJ1011ABNL左绿右黄8p有等有突出.jpg
  • 8p带等有突出(1712906154560).jpg
  • 左绿右黄8p带等有突出1(1712906154560).jpg
  • 左绿右黄8p带等有突出2(1712906154545).jpg
  • LPJ1011ABNL左绿右黄8p有等有突出1.jpg

47F-1205GYD2NL Compatible LINK-PP LPJ1011ABNL 10/100 Base-T 1x1 Port Integrated RJ45 Jack Tab Up

P/N:

LPJ1011ABNL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJ1011ABNL

  • Number of Ports: 1X1
  • Speed: 10Base-T,100Base-TX
  • PoE: Non-PoE
  • Latch: Up
  • Mounting Type: THT
  • LED Option: Green / Yellow
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJ1011ABNL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: 47F-1205GYD2NL

Packaging Details:

N.W/pCS:

0.009kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1000pcs

Carton size:

32*30*31cm

G.W/carton:

8.5kg

Product Specifications

LINK-PP Part Number: LPJ1011ABNL Other Part Number 47F-1205GYD2NL
Part Status Active Connector Type RJ45 MagJack (Integrated Magnetics)
Number of Positions/Contacts 8P8C (RJ45, Ethernet) Application-LAN Ethernet (Non-PoE)
Number of Ports 1×1 Port Speed 10/100BASE-T
Latch Tab-Up Cores per Port 4
Orientation 90° Right Angle PCB Mount Angle Side Entry
Shield EMI Tabs With LED Option Green / Yellow
PCB FR4 PCB Retaining Post T-Post
Package Height (Inches/mm) 0.530 / 13.45 Package Length (Inches/mm) 0.994 / 25.25
Package Width (Inches/mm) 0.636 / 16.15 Operating Temperature 0°C to +70°C
BST Circuit Yes AutoMDX Yes
Diodes No Contact Mating Area Plating Gold 6µ" / 15µ" / 30µ"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T, C

Single-Port 10/100BASE-T RJ45 MagJack

The LINK-PP LPJ1011ABNL is a single-port 10/100BASE-T Fast Ethernet RJ45 MagJack in a right-angle, side-entry through-hole configuration. The Ethernet interface incorporates an internal 4-core magnetic structure with a 1CT:1CT turns ratio and T, C configuration. The connector also includes Bob Smith termination (BST), AutoMDX support, Green/Yellow LEDs, and a specified operating temperature range of 0°C to +70°C.

The mechanical package features a housing height of 13.45 mm (0.530 inches), a length of 25.25 mm (0.994 inches), and a width of 16.15 mm (0.636 inches). Designed with a Tab-Up latch orientation, perimeter shield EMI tabs, and molded T-Posts for PCB retention, the LPJ1011ABNL provides an integrated board-level Ethernet interface for embedded networking, monitoring, imaging, control, and dedicated terminal equipment operating within the specified temperature range.

Lifecycle: Active
Ethernet Speed: Single-Port 10/100BASE-T
Cross Reference: 47F-1205GYD2NL
Mounting & Latch: Through Hole (THT) / Tab-Up
Operating Temperature: 0°C to +70°C Commercial
Sourcing Position: Cross-Reference / Second-Source Evaluation

Compatibility and Design Positioning

The LINK-PP LPJ1011ABNL is positioned as a cross-reference and alternative sourcing option for the 47F-1205GYD2NL single-port 10/100BASE-T RJ45 MagJack. It provides a comparable 1×1 port architecture, 10/100BASE-T interface, 1CT:1CT turns ratio, 4-core-per-port configuration, Tab-Up latch orientation, Green/Yellow LEDs, and 0°C to +70°C operating range. Engineering and procurement teams should verify pin assignment, PCB footprint, LED circuitry, electrical characteristics, and mechanical dimensions against the applicable official drawings before approving a component substitution.

Procurement and OEM Qualification

For sourcing teams and OEM engineering programs evaluating the LPJ1011ABNL as a second-source or BOM alternative, key qualification parameters include PCB mechanical footprint, pinout alignment, LED drive characteristics, electrical characteristics, operating temperature rating, and expected volume demand. LINK-PP can support sample evaluation, mechanical drawing review, and documentation requirements for prototype validation, AVL qualification, and volume production planning. Sourcing teams should verify lead-time requirements, applicable packaging requirements, and contact plating selection (6µ", 15µ", or 30µ") based on project lifecycle demands.

Tab-Up Latch Topology and Enclosure Front-Panel Optimization

Integrating Fast Ethernet magnetics into a Tab-Up RJ45 connector assembly provides practical packaging and mechanical layout considerations for embedded hardware:

  • Tab-Up Latch Orientation: The RJ45 plug release latch is positioned on the upper side of the port. Board and enclosure designers should provide sufficient clearance above the connector for plug insertion, latch engagement, and cable removal.
  • 13.45 mm Vertical Height: The 13.45 mm (0.530 inches) housing height supports space-constrained board-edge and embedded hardware designs where enclosure clearance is limited.
  • 0°C to +70°C Operating Range: The 0°C to +70°C specification defines the stated operating temperature range of the connector assembly. Final system qualification should consider the expected internal equipment temperature together with the PHY, PCB, enclosure, and airflow conditions.
  • EMI Tabs & T-Post Retention: The metal shield includes perimeter EMI tabs that can be incorporated into the system-level chassis and EMC design, while molded T-Post features help locate and mechanically retain the connector on the host PCB.

Integrated 4-Core Magnetics and AutoMDX Support

The Ethernet port incorporates an internal 4-core magnetic structure with a 1CT:1CT turns ratio and T, C configuration. The integrated magnetics provide the electrical interface between the Ethernet PHY and the cable-side RJ45 connection while reducing the need for separate discrete magnetic components on the host board.

The connector includes a Bob Smith termination (BST) circuit and is specified for Ethernet interfaces supporting AutoMDX operation. Hardware designers should evaluate the MagJack together with the selected PHY reference design, differential-pair routing, PCB grounding, and system-level EMC requirements. The LPJ1011ABNL is specified for non-PoE Ethernet applications.

Mechanical Envelope and PCB Layout Considerations

When integrating the LPJ1011ABNL into host hardware layouts, engineering teams should observe the following structural and layout parameters:

1. Package Dimensions and Front-Panel Cutout

The connector body measures 13.45 mm (0.530 inches) in height, 25.25 mm (0.994 inches) in length, and 16.15 mm (0.636 inches) in width. Front-panel openings should provide appropriate clearance for the connector shield profile, EMI tabs, and cable plug access.

2. Tab-Up Latch Headroom and Servicing

Because the release latch is oriented on the top face, designers should provide adequate vertical clearance above the connector port to ensure field technicians can access and depress the plug latch during servicing.

3. RJ45 Interface and PCB Footprint

The connector provides an 8P8C RJ45 Ethernet interface together with through-hole PCB terminations for the integrated magnetics, shield, LEDs, and mechanical retention features. Designers should use the official LPJ1011ABNL drawing to verify terminal numbering, LED connections, drill-hole diameters, T-Post locations, and PCB clearance requirements before releasing the footprint.

4. Status LED Interface

The connector includes Green and Yellow status LEDs. Hardware engineers should verify LED pin assignment, polarity, drive requirements, and any required external components against the LPJ1011ABNL electrical documentation and the selected PHY reference design.

Design Consideration Comparison: Integrated MagJack vs. Discrete Solution

Design Consideration LPJ1011ABNL
Integrated Tab-Up MagJack
Discrete 10/100 Magnetics
+ Modular RJ45 Jack
Component Integration Magnetics and RJ45 connector integrated in one housing Separate magnetics and RJ45 connector components
PCB Assembly Single integrated connector assembly Separate magnetics and RJ45 connector components
Connector Selection Integrated RJ45 port geometry Flexible external connector selection
Board-Edge Layout Consolidated footprint at board edge Requires trace routing between discrete magnetics and connector
Vertical Height Envelope Fixed 13.45 mm profile Model-dependent
Front-Panel Shielding Integrated metal shield with perimeter EMI tabs Dependent on chosen external RJ45 shield design
Primary Engineering Focus Consolidated 10/100BASE-T interface and integrated connector architecture Independent component placement and routing flexibility, depending on the selected implementation

Application Considerations for LPJ1011ABNL

Target Application Profile Primary Engineering Consideration
Smart Cameras & Vision Systems Tab-Up latch orientation and compact housing profile support board-edge integration in networked surveillance devices.
Solar Inverters & Energy Monitoring Integrated 10/100BASE-T magnetics provide a consolidated Ethernet physical interface for network-enabled energy monitoring and control hardware operating within the specified temperature range.
Embedded Controllers & Automation Equipment Integrated 10/100BASE-T magnetics, BST circuitry, and status LEDs consolidate the Ethernet physical interface into a single through-hole connector assembly.
Gaming Devices & Embedded Equipment Integrated Green and Yellow LEDs provide board-level status indication capability, with specific LED functions determined by the host PHY and system design.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials using the LPJ1011ABNL, hardware engineers should confirm the following design parameters against official documentation:

  • Footprint and Pinout Verification: Verify RJ45 interface connections, PCB terminal numbering, LED connections, T-Post locations, and shield-pin positions against the official LINK-PP LPJ1011ABNL drawing.
  • Tab-Up Headroom Clearance: Confirm that the enclosure cutout provides sufficient vertical clearance above the port for cable plug latch engagement and release.
  • LED Interface Verification: Verify the Green/Yellow LED pin assignment, polarity, drive requirements, and host PHY configuration against the applicable product and PHY documentation.
  • Shield and Chassis Grounding: Verify the connector shield-pin and EMI-tab implementation against the host system grounding, enclosure, and EMC design requirements.
  • PHY Magnetics Compatibility: Confirm that the 1CT:1CT turns ratio and BST termination topology align with the transceiver manufacturer's reference schematic.
  • Thermal Environment: Ensure that the operating environment inside the equipment chassis remains within the specified 0°C to +70°C commercial temperature range.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LPJ1011ABNL?

The LPJ1011ABNL is a single-port 10/100BASE-T non-PoE Ethernet RJ45 MagJack. It features an 8P8C interface, 4-core integrated magnetics per port, a 1CT:1CT turns ratio, Tab-Up latch orientation, side-entry through-hole mounting, Green/Yellow LEDs, an integrated BST circuit, AutoMDX support, and a specified operating temperature range of 0°C to +70°C.

Is the LINK-PP LPJ1011ABNL compatible with the 47F-1205GYD2NL?

The LPJ1011ABNL is positioned as a cross-reference and alternative sourcing option for the 47F-1205GYD2NL single-port 10/100BASE-T RJ45 MagJack. It provides a comparable 1×1 port architecture, 10/100BASE-T interface, 1CT:1CT turns ratio, 4-core-per-port configuration, Tab-Up latch orientation, Green/Yellow LEDs, and 0°C to +70°C operating range. Engineering and procurement teams should verify pin assignment, PCB footprint, LED circuitry, electrical characteristics, and mechanical dimensions against the applicable official drawings before approving a component substitution.

What are the design considerations for a Tab-Up latch orientation?

A Tab-Up orientation positions the RJ45 plug release latch on the upper side of the connector. Board and enclosure designers should verify sufficient clearance above the port for plug insertion, latch engagement, and cable removal against the applicable mechanical drawing.

What is the function of the internal 4-core magnetics architecture?

The LPJ1011ABNL specifies a 4-core integrated magnetic structure for its 10/100BASE-T Ethernet interface, with a 1CT:1CT turns ratio and T, C configuration. The integrated magnetics provide the electrical interface between the Ethernet PHY and the cable-side RJ45 connection. Engineers should refer to the applicable LINK-PP schematic and electrical documentation for the exact magnetic topology and termination arrangement.

How are the Green and Yellow LEDs used in the LPJ1011ABNL?

The LPJ1011ABNL includes integrated Green and Yellow LEDs. Their specific indication functions depend on the host PHY, LED pin assignment, and system configuration. Engineers should verify LED polarity, drive requirements, and supported indication functions against the LPJ1011ABNL electrical documentation and the selected PHY reference design.

Does the LPJ1011ABNL support Power over Ethernet (PoE)?

No. The LPJ1011ABNL is specified as a non-PoE Ethernet data interface. For applications requiring PoE power delivery, a connector and magnetics solution specifically rated for the required IEEE 802.3 PoE standard and DC current conditions should be selected.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.