HR913128CE Compatible LINK-PP LPJ4012GDNL 10/100 Base-T Single Port RJ45 Jack with Integrated Magnetics Tab Down Yellow/Green Led
P/N:
LPJ4012GDNL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJ4012GDNL
- Number of Ports: 1X1
- Speed: 10Base-T,100Base-TX
- PoE: Non-PoE
- Latch: Down
- Mounting Type: THT
- LED Option: Yellow / Green
- Shield EMI Tabs: YES
- Temperature: -40℃ to +85°C
- P/N: LPJ4012GDNL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: HR913128CE
Packaging Details:
N.W/pCS:
0.007kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1200pcs
Carton size:
32*30*31cm
G.W/carton:
8.5kg
Product Specifications
| LINK-PP Part Number: | LPJ4012GDNL | Part Number | HR913128CE |
| Part Status | Active | Connector Type | Jack |
| Number of Positions/Contacts | 8p8c (RJ45, Ethernet) | Application-Lan | Ethernet(Non-PoE) |
| Number of Ports | 1x1 Port | Speed | 10/100 Base-T |
| Latch | Down | Cores per Port | 4 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | SIDE ENTRY |
| Shield EMI Tabs | With | LED Option | Yellow/Green |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.524/13.30 | Package Length (Inches/mm) | 0.837/21.25 |
| Package Width (Inches/mm) | 0.627/15.93 | Temperature | -40℃ TO 85℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
Product Engineering Overview
LINK-PP LPJ4012GDNL is a single-port 8P8C RJ45 connector with integrated 10/100 Base-T magnetics. The product record lists a Tab-Down latch, yellow/green LEDs and Non-PoE operation. Its right-angle, side-entry configuration places the mating interface at the board edge.
The component is specified for −40°C to +85°C. Drawing LP10032016 Rev A shows a 15.93 mm wide, 21.25 mm long and 13.30 mm high body; account for the latch, shield and mating plug when designing the enclosure.
Compatibility and Design Positioning
LPJ4012GDNL is positioned as a cross-reference and alternative sourcing option for HR913128CE in the existing product record. This is a selection starting point, not proof of interchangeability: compare both manufacturers' current drawings, electrical specifications, LED pinout, PCB footprint and panel geometry before qualification.
Procurement and OEM Qualification
Request samples using the LINK-PP part number and the applicable drawing revision. Before AVL approval, confirm the contact plating variant, packaging and lead time, then verify sample fit and operation on the intended board and enclosure. Review both drawings again before production substitution.
Topology and Physical Packaging
- Interface: One 8P8C opening and integrated magnetics for 10/100 Base-T.
- Board attachment: Through-hole pins with shield and retaining-post features.
- Latch: Tab Down; leave access to release a plug in the installed enclosure.
- Indicators: Drawing identifies yellow on the left and green on the right in the front view.
- Envelope: Check the 15.93 × 21.25 × 13.30 mm body against the board edge and panel.
Magnetics and Electrical Interface
Drawing LP10032016 Rev A specifies 1CT:1CT for the TX and RX transformer paths and shows center taps and a Bob Smith termination network. The drawing lists a 1500 Vrms hipot test and a minimum 350 µH inductance at 100 kHz, 0.1 V and 8 mA DC bias. Confirm test conditions against the applicable revision; these component values are not a substitute for system-level testing.
Mechanical Envelope and PCB Layout Considerations
- Panel: Check plug insertion and Tab-Down release clearance in the finished enclosure.
- Footprint: Match all signal, LED, shield and retaining holes to the suggested PCB layout.
- Shield: Check shield contacts and clearance against the host grounding and enclosure design.
- LED drive: The drawing shows yellow on pins 9/10 and green on pins 11/12. Verify polarity and calculate suitable current limiting for the host supply.
Design Consideration Comparison
| Architecture | Engineering consideration |
|---|---|
| RJ45 with integrated magnetics | PCB footprint and magnetic pinout are tied to the selected connector. |
| Discrete RJ45 and magnetics | Placement and routing depend on the separate connector, transformer and PHY choices. |
Application Considerations
| Target Application Profile | Primary Engineering Consideration |
|---|---|
| LAN-on-motherboard equipment | Verify PHY interface, footprint and board-edge clearance. |
| 10/100 Ethernet hubs and switches | Check port placement, shield contact and enclosure cutout. |
| SOHO modem equipment | Check temperature, LED drive and panel access. |
Engineering Verification Checklist
- Compare the TX/RX pinout and center taps with the PHY design.
- Check the recommended hole pattern and fabrication tolerances.
- Confirm the shield and retaining-post connections.
- Test mating and latch access with the final panel.
- Verify LED polarity and current limiting.
- Validate isolation, signal performance and temperature in the assembled system.
Frequently Asked Questions
What speeds and operating temperature are specified?
The record specifies 10/100 Base-T and a component range of −40°C to +85°C. System performance and environmental limits require separate verification.
Can LPJ4012GDNL replace HR913128CE?
The product record positions it as a cross-reference. Compare the official drawings and specifications for both parts and qualify samples before replacement; the listing alone does not establish interchangeability.
What should be checked for a Tab-Down installation?
Allow enough clearance below the opening for the plug latch and check the connector position against the board edge and panel cutout.
How should the status LEDs be driven?
Drawing LP10032016 Rev A shows yellow on pins 9/10 and green on pins 11/12. Check the diagram's polarity and select current-limiting resistance for the actual supply and LED forward voltage.
Does LPJ4012GDNL support PoE?
The record specifies Non-PoE. Choose a connector and magnetics rated for the required PoE standard if the host supplies or receives power over Ethernet.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































