HR911103C Compatible LPJ0026EBNL 10/100 Base-T rj45 connector with transformer 1x1 Port Green/Yellow Led Tab Down
P/N:
LPJ0026EBNL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJ0026EBNL
- Number of Ports: 1X1
- Speed: 10Base-T,100Base-TX
- PoE: Non-PoE
- Latch: Down
- Mounting Type: THT
- LED Option: Green / Yellow
- Shield EMI Tabs: YES
- Temperature: 0℃ to 70℃
- P/N: LPJ0026EBNL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: HR911103C
Packaging Details:
N.W/pCS:
0.007kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1200pcs
Carton size:
32*30*31cm
G.W/carton:
8.5kg
Product Specifications
| LINK-PP Part Number: | LPJ0026EBNL | Part Number | HR911103C |
| Part Status | Active | Mounting Type | Through Hole |
| Number of Positions/Contacts | 8p8c (RJ45, Ethernet) | Application-Lan | Ethernet(NoN PoE) |
| Number of Ports | 1x1 Port | Speed | 10/100 Base-T |
| Latch | Down | Cores per Port | 5 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | SIDE ENTRY |
| Shield EMI Tabs | With | LED Option | Green/Yellow |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.528/13.40 | Package Length (Inches/mm) | 0.839/21.30 |
| Package Width (Inches/mm) | 0.626/15.90 | Temperature | 0℃ TO 70℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
HR911103C Compatible LINK-PP LPJ0026EBNL Fast Ethernet RJ45 Magjack Technical Overview
The LINK-PP LPJ0026EBNL (engineered as a direct 100% pin-to-pin drop-in replacement for HanRun Electronics HR911103C) is a single-port (1x1) Tab-Down female RJ45 Integrated Connector Module (ICM) with built-in 10/100 Base-T Fast Ethernet magnetics, Green/Yellow status LEDs, EMI shield tabs, and a Bob Smith Termination (BST) circuit. Compliant with IEEE 802.3u standards, it integrates a 5-core transformer/choke matrix (1CT:1CT turns ratio), delivering 10/100 Mbps Fast Ethernet signal isolation, 1500Vrms isolation, ESD protection, and 360-degree panel grounding for enterprise servers, network firewalls, hubs, and embedded mainboards.
- Fast Ethernet Magnetics Architecture: 8p8c RJ45 connector integrated with a 5-core magnetic matrix (1CT:1CT turns ratio) supporting 10/100BASE-TX communication over Cat5e/Cat6 wiring.
- Chassis EMI Grounding & Tab-Down Geometry: Side-entry right-angle through-hole mounting with a Tab-Down mechanical latch, T-Post PCB retention, Green/Yellow LEDs, and front EMI spring tabs for continuous panel bezel grounding.
- Built-In Circuit Protection & Noise Rejection: Features an integrated Bob Smith Termination (BST) network and Auto-MDIX logic for enhanced common-mode EMI suppression and automatic cable crossover detection.
- Direct Cross-Reference Replacement: Fully qualified footprint and electrical drop-in replacement for HanRun Electronics HR911103C for BOM cost optimization and secondary sourcing.
LINK-PP LPJ0026EBNL Fast Ethernet Female RJ45 Magjack Connector Overview
LINK-PP LPJ0026EBNL is a right-angle side-entry 1x1 Tab-Down female RJ45 integrated connector module (ICM) designed for non-PoE Fast Ethernet networking platforms. Housing signal transformers, common-mode chokes, Green/Yellow visual status LEDs, and Bob Smith Termination directly inside a metal-shielded jack with EMI spring tabs, this connector simplifies motherboard layout by replacing discrete PHY magnetics. It provides a highly reliable, pin-compatible secondary-source alternative to HanRun HR911103C in enterprise rack servers, commercial network firewalls, security monitoring gateways, and network hubs.
Key Benefits of LINK-PP LPJ0026EBNL / HR911103C Compatible Magjack
- Fully Integrated Magjack ICM Architecture (Reduces SMT Component Count): Consolidates discrete isolation transformers, common-mode chokes, resistors, and capacitors inside the RJ45 jack, reducing motherboard component count and SMT placement cycles.
- IEEE 802.3u 10/100BASE-TX Fast Ethernet Speed: Embeds a 5-core transformer and common-mode choke matrix that isolates and filters transmit/receive lines, ensuring clean Fast Ethernet eye diagrams with minimal differential insertion loss.
- Integrated Green/Yellow Visual Status LEDs: Built-in LED indicators provide clear visual diagnostics for Ethernet link establishment, port speed, and data activity status.
- EMI Shield Tabs for Enhanced Panel Grounding: Outfitted with external EMI spring tabs on the metal shield frame that press tightly against chassis front panel cutouts, forming a low-impedance grounding loop to suppress radiated emissions.
- Integrated Bob Smith Termination (BST) & Auto-MDIX: Built-in 75-ohm BST circuit routes common-mode EMI noise and ESD transients safely to ground, while Auto-MDIX logic supports automatic straight-through or crossover cable detection.
- Direct Second Sourcing for HanRun Electronics HR911103C: Identical 8p8c through-hole PCB land pattern and pinout allow seamless drop-in secondary sourcing to reduce procurement lead times.
Integrated Magnetics & 10/100BASE-TX Signal Architecture
The LINK-PP LPJ0026EBNL utilizes an advanced Integrated Connector Module (ICM) architecture that embeds 10/100 Base-T magnetics directly behind the RJ45 contact pins, eliminating high-frequency noise radiation caused by long trace runs on the motherboard.
5-Core Fast Ethernet Transformer & Choke Configuration
Featuring a 1CT:1CT transmit and receive turns ratio with 5 magnetic cores per port, the LPJ0026EBNL establishes 1500Vrms galvanic isolation between the Ethernet PHY transceiver chip and the external network cable. The 5-core layout provides precise impedance matching across transmit and receive differential pairs, suppressing inter-channel crosstalk and common-mode noise.
Bob Smith Termination (BST) & ESD Rejection
The integrated Bob Smith Termination (BST) network utilizes high-voltage capacitors and precision resistors to balance line impedance on unused cable pairs. This prevents common-mode noise reflection, reduces radiated EMI emissions, and enhances system ESD immunity during cable plugging.
PCB Mounting & Mechanical Specifications
Designed for automated Through-Hole Technology (THT) assembly, the LPJ0026EBNL incorporates robust mechanical features to ensure structural integrity on FR4 substrates.
Tab-Down Latch Geometry & EMI Shield Tabs
With package dimensions of 13.40mm H x 21.30mm L x 15.90mm W, the LPJ0026EBNL provides a compact footprint. Integrated Green/Yellow LEDs provide clear visual link status and data activity diagnostics, while T-Post mechanical pegs anchor the housing firmly to the motherboard during cable plugging.
Target Applications: Enterprise Servers, Network Firewalls, and Embedded Systems
Combining IEEE 802.3u Fast Ethernet speed, BST noise suppression, EMI shield tabs, and HanRun HR911103C compatibility, the LINK-PP LPJ0026EBNL supports diverse embedded systems:
- Enterprise Servers & Server Management: Ideal for 1U/2U rack server management ports, IPMI interfaces, and network interface cards (NICs).
- Commercial Network Firewalls & Security Gateways: Deployed in enterprise security firewalls, VPN routers, and SD-WAN edge appliances.
- Network Hubs, Video Recorders & Embedded Mainboards: Suitable for unmanaged Fast Ethernet hubs, security video recorders (NVR), and industrial single-board computers (SBCs).
How to Select and Verify LPJ0026EBNL vs. HR911103C
Hardware design engineers and procurement specialists evaluating the LINK-PP LPJ0026EBNL as a second-source replacement for HanRun Electronics HR911103C should verify the following core parameters:
- 5-Core Magnetics Compatibility: Confirm that a 5-core magnetic matrix and a 1CT:1CT turns ratio match your Fast Ethernet PHY transceiver reference design.
- Mechanical Latch & Footprint Alignment: Verify that the Tab-Down latch direction, 8p8c through-hole pin arrangement, and T-Post peg locations match the HR911103C PCB land pattern.
- LED Option & Driving Polarity: Confirm that the Green/Yellow LED configuration and pin polarity match your host SMT LED driving circuit.
- Package Height & EMI Tab Clearance: Ensure that the 13.40mm package height and external EMI spring tabs fit within your front-panel bezel window.
Frequently Asked Questions
Is LINK-PP LPJ0026EBNL compatible with HanRun HR911103C?
Yes. LINK-PP LPJ0026EBNL is a direct functional, electrical, and footprint drop-in replacement for HanRun Electronics HR911103C, featuring the same 1x1 Tab-Down Fast Ethernet 10/100 Base-T Magjack layout and Green/Yellow LEDs.
Does LINK-PP LPJ0026EBNL support Fast Ethernet (10/100 Base-T)?
Yes. LPJ0026EBNL is equipped with a 5-core magnetic matrix supporting 10/100BASE-TX Fast Ethernet data rates compliant with IEEE 802.3u standards.
What is the latch orientation and mounting style of LPJ0026EBNL?
LPJ0026EBNL features a Tab-Down mechanical latch orientation with 90-degree right-angle side-entry through-hole (THT) mounting and a T-Post mechanical PCB retaining peg.
What is the function of the integrated Bob Smith Termination (BST) circuit in LPJ0026EBNL?
The integrated Bob Smith Termination (BST) circuit utilizes built-in resistors and capacitors to balance line impedance on unused cable pairs, suppressing common-mode EMI noise and protecting the Ethernet PHY against ESD transients.
What contact gold plating options are available for LPJ0026EBNL?
LINK-PP offers LPJ0026EBNL with gold plating thickness options of Gold 6u", 15u", or 30u" in the contact mating area to meet different insertion durability and corrosion resistance specifications.
Is LINK-PP LPJ0026EBNL a Power over Ethernet (PoE) connector?
No. LPJ0026EBNL is a Non-PoE Fast Ethernet RJ45 Magjack designed strictly for Ethernet signal transmission and isolation without DC power delivery.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































