HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJ0026EBNL左绿右黄8p.jpg
  • 左绿右黄8p1(1712816202839).jpg
  • 左绿右黄8p(1712816202835).jpg
  • LPJ0026EBNL左绿右黄8p1.jpg
  • 左绿右黄8p2(1712816202816).jpg

LPJ0026EBNL 10/100 Base-T rj45 connector with transformer 1x1 Port Green/Yellow Led Tab Down

P/N:

LPJ0026EBNL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJ0026EBNL

  • Compatible Brands: LINK-PP
  • Number of Ports: 1X1
  • Speed: 10Base-T,100Base-TX
  • PoE: Non-PoE
  • Latch: Down
  • Mounting Type: THT
  • LED Option: Green / Yellow
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJ0026EBNL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LPJ0026EBNL

Packaging Details:

N.W/pCS:

0.007kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1200pcs

Carton size:

32*30*31cm

G.W/carton:

8.5kg

Product Specifications

LINK-PP Part Number: LPJ0026EBNL Connector Type Jack
Part Status Active Mounting Type Through Hole
Number of Positions/Contacts 8p8c (RJ45, Ethernet) Application-Lan Ethernet(NoN PoE)
Number of Ports 1x1 Port Speed 10/100 Base-T
Latch Down Cores per Port 5
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs With LED Option Green/Yellow
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.528/13.40 Package Length (Inches/mm) 0.839/21.30
Package Width (Inches/mm) 0.626/15.90 Temperature 0℃ TO 70℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

LINK-PP LPJ0026EBNL Single Port Fast Ethernet 10/100 Base-T Female RJ45 Magjack Technical Overview

The LINK-PP LPJ0026EBNL is an industrial-grade single-port (1x1) Tab-Down female RJ45 Integrated Connector Module (ICM) with built-in 10/100 Base-T Fast Ethernet magnetics, Green/Yellow status LEDs, EMI shield tabs, and a Bob Smith Termination (BST) circuit. Compliant with IEEE 802.3u standards, it integrates a 5-core transformer/choke matrix (1CT:1CT turns ratio), delivering 10/100 Mbps Fast Ethernet signal isolation, 1500Vrms isolation, ESD protection, and 360-degree panel grounding for enterprise servers, network firewalls, hubs, and embedded mainboards.

  • Fast Ethernet Magnetics Architecture: 8p8c RJ45 connector integrated with a 5-core magnetic matrix (1CT:1CT turns ratio) supporting 10/100BASE-TX communication over Cat5e/Cat6 wiring.
  • Chassis EMI Grounding & Tab-Down Geometry: Side-entry right-angle through-hole mounting with a Tab-Down mechanical latch, T-Post PCB retention, Green/Yellow LEDs, and front EMI spring tabs for continuous panel bezel grounding.
  • Built-In Circuit Protection & Noise Rejection: Features an integrated Bob Smith Termination (BST) network and Auto-MDIX logic for enhanced common-mode EMI suppression and automatic cable crossover detection.
  • Industry-Standard Footprint Sourcing: Serves as a direct pin-to-pin drop-in replacement for standard 10/100 Base-T Tab-Down RJ45 Magjacks (e.g., RB1-105B8A1F series) for BOM cost optimization and secondary sourcing.

LINK-PP LPJ0026EBNL Fast Ethernet Female RJ45 Magjack Connector Overview

LINK-PP LPJ0026EBNL is a right-angle side-entry 1x1 Tab-Down female RJ45 integrated connector module (ICM) designed for non-PoE Fast Ethernet networking platforms. Housing signal transformers, common-mode chokes, Green/Yellow visual status LEDs, and Bob Smith Termination directly inside a metal-shielded jack with EMI spring tabs, this connector simplifies motherboard layout by replacing discrete PHY magnetics. It provides a highly reliable, pin-compatible solution for enterprise rack servers, commercial network firewalls, security monitoring gateways, and network hubs.

Key Benefits of LINK-PP LPJ0026EBNL Fast Ethernet Female RJ45 Connector

  • Fully Integrated Magjack Architecture (ICM): Consolidates discrete isolation transformers, common-mode chokes, resistors, and capacitors inside the RJ45 jack, reducing motherboard component count and SMT placement cycles.
  • IEEE 802.3u 10/100BASE-TX Fast Ethernet Speed: Embeds a 5-core transformer and common-mode choke matrix that isolates and filters transmit/receive lines, ensuring clean Fast Ethernet eye diagrams with minimal differential insertion loss.
  • Integrated Green/Yellow Visual Status LEDs: Built-in LED indicators provide clear visual diagnostics for Ethernet link establishment, port speed, and data activity status.
  • EMI Shield Tabs for Enhanced Panel Grounding: Outfitted with external EMI spring tabs on the metal shield frame that press tightly against chassis front panel cutouts, forming a low-impedance grounding loop to suppress radiated emissions.
  • Integrated Bob Smith Termination (BST) & Auto-MDIX: Built-in 75-ohm BST circuit routes common-mode EMI noise and ESD transients safely to ground, while Auto-MDIX logic supports automatic straight-through or crossover cable detection.
  • Customizable Gold Contact Plating: Available in Gold 6u", 15u", or 30u" plating thickness options to ensure low contact resistance and corrosion protection across 750+ mating cycles.

Integrated Magnetics & 10/100BASE-TX Signal Architecture

The LINK-PP LPJ0026EBNL utilizes an advanced Integrated Connector Module (ICM) architecture that embeds 10/100 Base-T magnetics directly behind the RJ45 contact pins, eliminating high-frequency noise radiation caused by long trace runs on the motherboard.

5-Core Fast Ethernet Transformer & Choke Configuration

Featuring a 1CT:1CT transmit and receive turns ratio with 5 magnetic cores per port, the LPJ0026EBNL establishes 1500Vrms galvanic isolation between the Ethernet PHY transceiver chip and the external network cable. The 5-core layout provides precise impedance matching across transmit and receive differential pairs, suppressing inter-channel crosstalk and common-mode noise.

Bob Smith Termination (BST) & ESD Rejection

The integrated Bob Smith Termination (BST) network utilizes high-voltage capacitors and precision resistors to balance line impedance on unused cable pairs. This prevents common-mode noise reflection, reduces radiated EMI emissions, and enhances system ESD immunity during cable plugging.

PCB Mounting & Mechanical Specifications

Designed for automated Through-Hole Technology (THT) assembly, the LPJ0026EBNL incorporates robust mechanical features to ensure structural integrity on FR4 substrates.

Tab-Down Latch Geometry & EMI Shield Tabs

With package dimensions of 13.40mm H x 21.30mm L x 15.90mm W, the LPJ0026EBNL provides a compact footprint. Integrated Green/Yellow LEDs provide clear visual link status and data activity diagnostics, while T-Post mechanical pegs anchor the housing firmly to the motherboard during cable plugging.

Target Applications: Enterprise Servers, Network Firewalls, and Embedded Systems

Combining IEEE 802.3u Fast Ethernet speed, BST noise suppression, EMI shield tabs, and Tab-Down geometry, the LINK-PP LPJ0026EBNL supports diverse embedded systems:

  • Enterprise Servers & Server Management: Ideal for 1U/2U rack server management ports, IPMI interfaces, and network interface cards (NICs).
  • Commercial Network Firewalls & Security Gateways: Deployed in enterprise security firewalls, VPN routers, and SD-WAN edge appliances.
  • Network Hubs, Video Recorders & Embedded Mainboards: Suitable for unmanaged Fast Ethernet hubs, security video recorders (NVR), and industrial single-board computers (SBCs).

How to Select and Verify LINK-PP LPJ0026EBNL RJ45 Magjack

Hardware design engineers and procurement specialists evaluating the LINK-PP LPJ0026EBNL for new designs or second-source qualification should verify the following core parameters:

  • 5-Core Magnetics Compatibility: Confirm that a 5-core magnetic matrix and a 1CT:1CT turns ratio match your Fast Ethernet PHY transceiver reference design.
  • Mechanical Latch & Footprint Alignment: Verify that the Tab-Down latch direction, 8p8c through-hole pin arrangement, and T-Post peg locations match your PCB land pattern.
  • LED Option & Driving Polarity: Confirm that the Green/Yellow LED configuration and pin polarity match your host SMT LED driving circuit.
  • Package Height & EMI Tab Clearance: Ensure that the 13.40mm package height and external EMI spring tabs fit within your front-panel bezel window.

Frequently Asked Questions

What is LINK-PP LPJ0026EBNL?

LINK-PP LPJ0026EBNL is a single-port (1x1) Tab-Down female RJ45 Magjack featuring integrated 10/100 Base-T Fast Ethernet magnetics, Green/Yellow status LEDs, EMI shield tabs, an integrated Bob Smith Termination circuit, and an operating temperature range of 0°C to 70°C.

Does LINK-PP LPJ0026EBNL support Fast Ethernet (10/100 Base-T)?

Yes. LPJ0026EBNL is equipped with a 5-core magnetic matrix supporting 10/100BASE-TX Fast Ethernet data rates compliant with IEEE 802.3u standards.

What is the latch orientation and mounting style of LPJ0026EBNL?

LPJ0026EBNL features a Tab-Down mechanical latch orientation with 90-degree right-angle side-entry through-hole (THT) mounting and a T-Post mechanical PCB retaining peg.

What is the function of the integrated Bob Smith Termination (BST) circuit in LPJ0026EBNL?

The integrated Bob Smith Termination (BST) circuit utilizes built-in resistors and capacitors to balance line impedance on unused cable pairs, suppressing common-mode EMI noise and protecting the Ethernet PHY against ESD transients.

What contact gold plating options are available for LPJ0026EBNL?

LINK-PP offers LPJ0026EBNL with gold plating thickness options of Gold 6u", 15u", or 30u" in the contact mating area to meet different insertion durability and corrosion resistance specifications.

Is LINK-PP LPJ0026EBNL a Power over Ethernet (PoE) connector?

No. LPJ0026EBNL is a Non-PoE Fast Ethernet RJ45 Magjack designed strictly for Ethernet signal transmission and isolation without DC power delivery.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.