HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJ1014AHNL左绿右黄8p有等有突出1.jpg
  • LPJ1014AHNL左绿右黄8p有等有突出.jpg
  • 8p带等有突出(1712734908505).jpg
  • 左绿右黄8p带等有突出2(1712734908528).jpg
  • 左绿右黄8p带等有突出1(1712734908395).jpg

A31-108-260-906 Compatible LINK-PP LPJ1014AHNL 10/100 Base-T rj45 magnetic Jack 1x1 Port Tab Up Green/Yellow Led

P/N:

LPJ1014AHNL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJ1014AHNL

  • Number of Ports: 1X1
  • Speed: 10Base-T,100Base-TX
  • PoE: Non-PoE
  • Latch: Up
  • Mounting Type: THT
  • LED Option: Green / Yellow
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJ1014AHNL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: A31-108-260-906

Packaging Details:

N.W/pCS:

0.009kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1000pcs

Carton size:

32*30*31cm

G.W/carton:

8.5kg

Product Specifications

LINK-PP Part Number LPJ1014AHNL Part Number A31-108-260-906
Part Status Active Connector Type Jack
Number of Positions/Contacts 8P8C (RJ45, Ethernet) Application-LAN Ethernet (Non-PoE)
Number of Ports 1x1 Port Speed 10/100BASE-T
Latch Up Cores per Port 4
Orientation 90° Angle (Right) PCB Mount Angle Side Entry
Shield EMI Tabs With LED Option Green / Yellow
PCB FR4 PCB Retaining Post T-Post
Package Height (Inches/mm) 0.530 / 13.45 Package Length (Inches/mm) 0.994 / 25.25
Package Width (Inches/mm) 0.636 / 16.15 Temperature 0°C to +70°C
BST Circuit Yes AutoMDX Yes
Diodes No Contact Mating Area Plating Gold 6µ" / 15µ" / 30µ"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T, C

A31-108-260-906 Compatible Single-Port 10/100BASE-T Integrated RJ45 MagJack

The LINK-PP LPJ1014AHNL is a single-port integrated RJ45 MagJack designed for 10/100BASE-T Fast Ethernet applications in non-PoE network architectures. Featuring a Tab-Up (top latch) orientation and an 8P8C modular interface, it combines 4-core isolation magnetics, Bob Smith termination, and Green/Yellow status LEDs inside a shielded through-hole housing.

The connector features a 90° right-angle, side-entry profile with perimeter EMI grounding tabs, T-Post mechanical PCB retention, and a commercial operating temperature range of 0°C to +70°C. It is positioned as a compatible alternative to the A31-108-260-906 for smart cameras, game controllers, solar inverters, and embedded networking hardware where standard board-edge mounting and integrated physical-layer filtering are primary design considerations.

Hardware designers should verify the mechanical drawing, pin assignment, PCB land pattern, and PHY manufacturer interface guidelines against product documentation before releasing PCB layouts for production.

Ethernet Speed: 10/100BASE-T Fast Ethernet
Reference Part: A31-108-260-906
Latch Orientation: Tab-Up (Top Latch)
Magnetics Architecture: 4-Core Integrated Design
Shield Configuration: Metal Shield (With EMI Tabs)
Operating Temperature: 0°C to +70°C Commercial

A31-108-260-906 Compatible Design Positioning

The LPJ1014AHNL is positioned as a compatible alternative to the A31-108-260-906 for 10/100BASE-T Fast Ethernet applications, providing hardware engineering and procurement teams with a potential second-source option for designs requiring comparable package, footprint, and electrical interface characteristics.

To ensure proper integration on existing or new motherboard designs, engineering teams should cross-reference the mechanical drawing, pin assignment, solder pad geometry, and electrical characteristics against original design requirements prior to volume release.

10/100BASE-T Signal Transmission and 4-Core Magnetics Architecture

Fast Ethernet (100BASE-TX) communication utilizes two differential pairs: one dedicated to transmit (TX) and one to receive (RX). The LPJ1014AHNL incorporates an internal 4-core magnetic structure with a 1CT:1CT turns ratio (T, C configuration), providing galvanic isolation and common-mode filtering specifically for these active pairs.

Because the connector is engineered specifically for non-PoE architectures, the internal magnetic layout is dedicated to differential data transmission without allocating space or thermal margins to high-current DC power paths. This supports balanced physical-layer signal coupling across the operating temperature range.

Hardware designers should evaluate the MagJack in conjunction with the host Fast Ethernet PHY transceiver, differential trace layout, ground plane design, and enclosure EMC strategy to ensure proper physical-layer performance.

Mechanical and PCB Design Considerations

Physical mounting orientation and board anchoring are key considerations when integrating right-angle through-hole RJ45 jacks:

1. 8P8C Interface and PCB Termination

The 8P8C configuration features an 8-contact RJ45 mating face alongside through-hole termination pins on the PCB side. The terminal pins accommodate differential data lines, common-mode termination references, and integrated LED connections.

Engineers should consult the official mechanical drawing to verify pin pitch, drill diameters, and trace clearance requirements before releasing board artwork.

2. Tab-Up Latch Orientation

The Tab-Up configuration positions the RJ45 plug latch release toward the upper side of the connector. This orientation provides unobstructed latch access when the connector is mounted along the bottom edge of a circuit board or near the lower boundary of an equipment faceplate.

3. T-Post Mechanical Retention

A molded T-Post locating peg anchors the connector body securely to the FR4 PCB. It assists in absorbing lateral and axial forces during cable insertion and extraction, supporting solder-joint reliability under mechanical stress.

4. Shielding and Status LEDs

The integrated metal shield incorporates perimeter EMI grounding tabs that establish contact with the front panel cutout. Green and Yellow status LEDs provide visual indication of link status and network activity directly at the connector interface.

Architecture Comparison: 10/100 MagJack vs. Alternative Implementations

Evaluation Metric LPJ1014AHNL
10/100BASE-T MagJack
Gigabit 1000BASE-T
MagJack
Discrete 10/100 Magnetics
+ Non-Magnetic Jack
Ethernet Data Rate 10/100BASE-T (Fast Ethernet) 10/100/1000BASE-T (Gigabit) Depends on discrete transformer
Magnetics Architecture Integrated 4-Core Magnetics Integrated 8-Core or 12-Core Separate discrete magnetic module on PCB
Active Twisted Pairs 2 Pairs (TX / RX) 4 Pairs (Full Duplex) 2 Pairs (10/100)
PCB Component Count Reduced — consolidates jack, magnetics, LEDs Reduced Higher — multiple discrete placements required
Shielding Style Metal shield with EMI tabs Typically with EMI tabs Varies by connector selection
Primary Advantage Cost-effective integrated Fast Ethernet I/O Higher Gigabit throughput Independent layout of transformer module

Application Considerations for LPJ1014AHNL

Target Application Profile Potential Plating Option Primary Engineering Consideration
Smart Cameras & Vision Systems Gold 15µ" Reliable 10/100BASE-T Fast Ethernet connectivity, integrated status LEDs, and perimeter EMI tabs for panel bonding.
Game Hardware & Multi-Media Controllers Gold 6µ" / 15µ" Standard 25.25 mm package length, low component count, and standard 0°C to +70°C commercial operating range.
Solar Inverters & Energy Data Gateways Gold 15µ" / 30µ" Stable physical-layer isolation, T-Post mechanical PCB anchoring against vibration.
Embedded Routers & Modems Gold 6µ" / 15µ" Consolidates physical-layer magnetics and termination into a small footprint, simplifying board routing.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials (BOM) using the LPJ1014AHNL, hardware engineers should confirm the following design parameters against the official product drawing:

  • Package Dimensions & Clearances: Verify the 13.45 mm height, 25.25 mm length, and 16.15 mm width against internal enclosure clearances.
  • Pinout and Schematic Alignment: Verify the terminal numbering, center-tap connections, and differential-pair assignments against the official product drawing and selected PHY reference design.
  • Tab-Up Latch Clearance: Ensure adequate clearance above the front-panel cutout for RJ45 plug latch disengagement during maintenance.
  • PCB Land Pattern: Check through-hole pad diameters, T-Post hole locations, and shield ground pin drill sizes on the manufacturer's footprint drawing.
  • EMI Tab Contact Geometry: Confirm front-panel cutout dimensions ensure continuous mechanical contact with the shield EMI spring tabs.
  • LED Drive Circuitry: Implement suitable series current-limiting resistors and drive circuits on the host PCB matched to the selected PHY.
  • Thermal Operating Environment: Validate that the component operating environment remains within the specified 0°C to +70°C range.

Frequently Asked Questions

Is the LINK-PP LPJ1014AHNL a compatible alternative to the A31-108-260-906?

The LPJ1014AHNL is designed as a compatible alternative to the A31-108-260-906 with a single-port 10/100BASE-T MagJack configuration, Tab-Up latch, 25.25 mm package length, 8P8C pinout, Green/Yellow LEDs, T-Post PCB retention, and metal shield with EMI tabs. Engineers should verify the mechanical drawing, pin assignments, and PCB land pattern before production use.

What is the function of the 4-core magnetic design?

The 4-core magnetic structure provides isolation transformers and common-mode chokes for the two differential pairs (transmit and receive) used in 10/100BASE-T Fast Ethernet, providing physical-layer signal coupling and common-mode noise filtering.

What mechanical advantage does the Tab-Up latch orientation offer?

The Tab-Up latch orientation places the plug release latch on the top of the connector. This provides easy finger access when the connector is mounted along the bottom edge of a printed circuit board or near the base of an enclosure.

What role do the integrated EMI shielding tabs play?

The perimeter EMI tabs act as spring-finger contacts that press against the metal front panel or bezel cutout, establishing a low-impedance ground connection to the chassis to support the equipment's overall shielding and EMC strategy.

Is the LPJ1014AHNL suitable for Power over Ethernet (PoE)?

No. The LPJ1014AHNL is specified as a Non-PoE connector for data-only Fast Ethernet interfaces. For systems requiring PoE power delivery, a MagJack with dedicated PoE-rated magnetics and DC current paths should be selected.

What contact plating options are available for the LPJ1014AHNL?

The LPJ1014AHNL is available with 6 micro-inch, 15 micro-inch, or 30 micro-inch gold plating options at the contact mating area. Selection should be evaluated based on the expected mating cycles, operating environment, and application durability requirements.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.