HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • MIC38013-0155T-LF3.jpg
  • 7499111211 WE.jpg
  • RD1-215BAM1A.jpg
  • RDA-215BAM1A UDE.jpg
  • ARJ11E-MCSA-A-B-EM2.jpg

RD1-215BAM1A Compatible LINK-PP LPJG0801GENL 100/1000 Base-T Tab Down Green/Yellow Led Single Port 10 Pin RJ 45 Network Connection

P/N:

LPJG0801GENL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJG0801GENL

  • Number of Ports: 1X1
  • Speed: 1000Base-T
  • PoE: Non-PoE
  • Latch: Down
  • Mounting Type: SMT
  • LED Option: Green / Yellow
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJG0801GENL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: RD1-215BAM1A

Packaging Details:

N.W/pCS:

0.008kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1200pcs

Carton size:

32*30*31cm

G.W/carton:

9kg

Product Specifications

LINK-PP Part Number LPJG0801GENL Other Part Number RD1-215BAM1A
Part Status Active Connector Type Jack
Number of Positions/Contacts 10P8C (RJ45, Ethernet) Application-LAN Ethernet (Non-PoE)
Number of Ports 1x1 Port Speed 10/100/1000BASE-T
Latch Down Cores per Port 8
Orientation 90° Angle (Right) PCB Mount Angle Side Entry
Shield EMI Tabs With LED Option Green / Yellow
PCB FR4 PCB Retaining Post T-Post
Package Height (Inches/mm) 0.524 / 13.30 Package Length (Inches/mm) 0.837 / 21.25
Package Width (Inches/mm) 0.627 / 15.93 Temperature 0°C to +70°C
BST Circuit Yes AutoMDX Yes
Diodes No Contact Mating Area Plating Gold 6µ" / 15µ" / 30µ"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T, C

RD1-215BAM1A Compatible Single-Port Gigabit 10/100/1000BASE-T Integrated RJ45 MagJack

The LINK-PP LPJG0801GENL is a single-port integrated RJ45 MagJack engineered for 10/100/1000BASE-T Gigabit Ethernet applications in non-PoE network designs. Featuring a Tab-Down (bottom latch) orientation and a compact 21.25 mm (0.837 inches) package length, it integrates the 8P8C modular interface, 8-core isolation magnetics, Bob Smith termination, and Green/Yellow status LEDs inside a shielded through-hole housing.

The connector features a 90° right-angle, side-entry profile with perimeter EMI grounding tabs, T-Post mechanical PCB retention, and a commercial operating temperature range of 0°C to +70°C. It is positioned as a compatible alternative to the RD1-215BAM1A for embedded mainboards, video recorders, monitoring systems, and smart metering devices where board depth and upper panel clearances are primary design constraints.

Hardware designers should verify the mechanical drawing, pin assignment, PCB land pattern, and PHY manufacturer interface guidelines against product documentation before releasing PCB layouts for production.

Ethernet Speed: 10/100/1000BASE-T Gigabit
Reference Part: RD1-215BAM1A
Latch Orientation: Tab-Down (Bottom Latch)
Package Depth: Compact 21.25 mm Length
Shield Configuration: Metal Shield (With EMI Tabs)
Operating Temperature: 0°C to +70°C Commercial

RD1-215BAM1A Compatible Design Positioning

The LPJG0801GENL is positioned as a compatible alternative to the RD1-215BAM1A for 10/100/1000BASE-T Gigabit Ethernet applications, providing hardware engineering and procurement teams with a potential second-source option for designs requiring comparable package and interface characteristics.

To ensure proper integration on existing or new motherboard designs, engineering teams should cross-reference the mechanical drawing, pin assignment, solder pad geometry, and electrical characteristics against original design requirements prior to volume release.

Tab-Down Latch Geometry and Short-Depth Enclosure Integration

Mechanical layout constraints often dictate the required latch orientation and component depth of front-panel RJ45 jacks:

  • Tab-Down Accessibility: In systems where the connector is positioned near the upper edge of an enclosure, under an overhang, or beneath an LCD display bezel, a standard Tab-Up latch can be difficult to reach. The Tab-Down (bottom latch) configuration places the plug release tab on the lower side, ensuring unobstructed cable disengagement.
  • Compact 21.25 mm Package Length: Standard Gigabit MagJacks commonly feature package lengths ranging from 25.40 mm to 32.50 mm. The LPJG0801GENL's compact 21.25 mm depth frees valuable PCB space directly behind the connector, facilitating shorter trace routing to PHY transceivers, decoupling capacitors, and power management circuits.
  • Metal Shielding with EMI Tabs: Spring-finger grounding tabs around the perimeter of the metal shell establish multi-point contact with the equipment front panel or bezel cutout, supporting the system-level shielding and grounding architecture.

1000BASE-T Signal Transmission and Integrated 8-Core Magnetics

Gigabit Ethernet (1000BASE-T) transmits full-duplex differential signals across four twisted pairs simultaneously. The LPJG0801GENL incorporates an internal 8-core magnetic structure with a 1CT:1CT turns ratio (T, C configuration), providing galvanic isolation and common-mode filtering across all active channels.

Because the connector is engineered specifically for non-PoE architectures, the internal magnetic layout is dedicated to differential data transmission without allocating space or thermal margins to high-current DC power paths. This contributes to the connector's compact 21.25 mm package length while maintaining physical-layer signal coupling.

Hardware designers should evaluate the MagJack in conjunction with the host Gigabit PHY transceiver, differential trace layout, ground plane design, and enclosure EMC strategy to ensure proper physical-layer performance.

Mechanical and PCB Design Considerations

Physical mounting orientation and board anchoring are key considerations when integrating short-body RJ45 jacks:

1. 10P8C Interface and PCB Termination

The 10P8C configuration features an 8-contact RJ45 mating face alongside 10 through-hole termination pins on the PCB side. The terminal pins accommodate differential data lines, common-mode termination references, and integrated LED connections.

Engineers should consult the official mechanical drawing to verify pin pitch, drill diameters, and trace clearance requirements before releasing board artwork.

2. T-Post Mechanical Retention

A molded T-Post locating peg anchors the connector body securely to the FR4 PCB. It assists in absorbing lateral and axial forces during cable insertion and extraction, supporting solder-joint reliability under mechanical stress.

3. Status LED Indicators

The connector incorporates Green and Yellow LEDs for visual link and network activity indication. Current-limiting resistors and drive circuits must be implemented on the host PCB in accordance with PHY specifications and LED electrical ratings.

Architecture Comparison: Short-Body Tab-Down MagJack vs. Alternative Implementations

Evaluation Metric LPJG0801GENL
Short-Body Tab-Down MagJack
Standard 25.4 mm
Tab-Up MagJack
Discrete Gigabit Magnetics
+ Non-Magnetic Jack
Package Length (Depth) Compact (21.25 mm / 0.837 in) Standard (25.40 mm / 1.000 in) Requires space for connector + discrete IC
Latch Orientation Tab-Down (Bottom Latch) Tab-Up (Top Latch) Depends on selected connector
Shielding Style Metal shield with EMI tabs Typically with EMI tabs Varies by connector selection
Magnetics Architecture Integrated 8-Core Magnetics Integrated 8-Core or 12-Core Separate discrete magnetic module on PCB
PCB Component Count Reduced — consolidates jack, magnetics, LEDs Reduced Higher — multiple discrete placements required
Primary Advantage Compact depth for shallow enclosures & top-panel I/O Standard front-panel edge placement Independent selection of transformer module

Application Considerations for LPJG0801GENL

Target Application Profile Potential Plating Option Primary Engineering Consideration
Monitoring Systems & Network Video Recorders Gold 15µ" / 30µ" Compact 21.25 mm length fits shallow recorder enclosures; Tab-Down latch eases maintenance access.
Embedded Mainboards & Single-Board Computers Gold 6µ" / 15µ" Consolidates physical-layer magnetics and termination into a small footprint, operating across 0°C to +70°C.
Smart Energy Meters & Gateway Concentrators Gold 6µ" / 15µ" Reliable Gigabit connectivity, compact package depth, integrated Green/Yellow status LEDs.
Commercial Network Routers & Firewalls Gold 15µ" / 30µ" High-speed Gigabit throughput, space-saving board footprint, perimeter EMI shielding tabs for panel bonding.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials (BOM) using the LPJG0801GENL, hardware engineers should confirm the following design parameters against the official product drawing:

  • Package Dimensions & Clearances: Verify the 13.30 mm height, 21.25 mm length, and 15.93 mm width against internal enclosure clearances.
  • Pinout and Schematic Alignment: Verify the 10P8C terminal numbering, center-tap connections, and differential-pair assignments against the official product drawing and selected PHY reference design.
  • Tab-Down Latch Clearance: Ensure adequate clearance below the front-panel cutout for RJ45 plug latch disengagement during maintenance.
  • PCB Land Pattern: Check through-hole pad diameters, T-Post hole locations, and shield ground pin drill sizes on the manufacturer's footprint drawing.
  • EMI Tab Contact Geometry: Confirm front-panel cutout dimensions ensure continuous mechanical contact with the shield EMI spring tabs.
  • LED Drive Circuitry: Implement suitable series current-limiting resistors and drive circuits on the host PCB matched to the selected PHY.
  • Thermal Operating Environment: Validate that the component operating environment remains within the specified 0°C to +70°C range.

Frequently Asked Questions

Is the LINK-PP LPJG0801GENL a compatible alternative to the RD1-215BAM1A?

The LPJG0801GENL is designed as a compatible alternative to the RD1-215BAM1A with a single-port Gigabit MagJack configuration, Tab-Down latch, short 21.25 mm package length, 10P8C pinout, Green/Yellow LEDs, T-Post PCB retention, and metal shield with EMI tabs. Engineers should verify the mechanical drawing, pin assignments, and PCB land pattern before production use.

What is the mechanical advantage of the Tab-Down latch and 21.25 mm package length?

The Tab-Down latch places the release tab on the bottom of the connector, facilitating plug removal when mounted near the upper edge of an enclosure or under a display bezel. The compact 21.25 mm length reduces board depth requirements, freeing space behind the connector for host-board routing.

What function do the integrated EMI shielding tabs serve?

The perimeter EMI tabs act as spring-finger contacts that press against the metal front panel or enclosure cutout. This establishes a low-impedance mechanical and electrical connection to chassis ground, supporting the system-level EMC and shielding design.

Is the LPJG0801GENL suitable for Power over Ethernet (PoE) applications?

No. The LPJG0801GENL is specified as a Non-PoE connector for data-only Gigabit Ethernet interfaces. For systems requiring PoE or PoE+ power delivery, a MagJack with dedicated PoE-rated magnetics and DC current paths should be selected.

Does the LPJG0801GENL support AutoMDX?

Yes. The product specification lists AutoMDX as supported. Engineers should verify the selected Ethernet PHY interface and reference design guidelines before finalizing production layouts.

What contact plating options are available for the LPJG0801GENL?

The LPJG0801GENL is available with 6 micro-inch, 15 micro-inch, or 30 micro-inch gold plating options at the contact mating area. Selection should be evaluated based on the expected mating cycles, operating environment, and application durability requirements.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.