Halo HFJ11-E1G41E-L12RL Compatible LINK-PP LPJG4843GENL 100/1000 Base-T RJ45 Magjack Connector Tab Down 1 Port
P/N:
LPJG4843GENL
Manufacturer:
LINK-PP
Compatible Brand:
Halo
Compatible P/N:
LPJG4843GENL
- Compatible Brands: Halo
- Number of Ports: 1X1
- Speed: 1000Base-T
- PoE: Non-PoE
- Latch: Down
- Mounting Type: SMT
- LED Option: Green / Yellow
- Shield EMI Tabs: YES
- Temperature: -40℃ to +85°C
- P/N: LPJG4843GENL
- Manufacturer: LINK-PP
- Compatible Brand: Halo
- Compatible P/N: HFJ11-E1G41E-L12RL
Packaging Details:
N.W/pCS:
0.008kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1200pcs
Carton size:
32*30*31cm
G.W/carton:
9kg
Product Specifications
| LINK-PP Part Number | LPJG4843GENL | Halo Part Number | HFJ11-E1G41E-L12RL |
| Part Status | Active | Connector Type | Jack |
| Number of Positions/Contacts | 10P8C (RJ45, Ethernet) | Application-Lan | Ethernet(NoN PoE) |
| Number of Ports | 1x1 Port | Speed | 10/100/1000 Base-T |
| Latch | Down | Cores per Port | 8 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | SIDE ENTRY |
| Shield EMI Tabs | With | LED Option | Green/Yellow |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.524/13.30 | Package Length (Inches/mm) | 0.837/21.25 |
| Package Width (Inches/mm) | 0.627/15.93 | Temperature | -40℃ TO 85℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
Halo HFJ11-E1G41E-L12RL Compatible LINK-PP LPJG4843GENL 10/100/1000Base-T RJ45 Magjack
Engineered to deliver uncompromising signal integrity and robust physical protection in demanding industrial environments, the LINK-PP LPJG4843GENL is a high-performance, single-port 10/100/1000Base-T (Gigabit Ethernet) RJ45 Magjack. By integrating the physical networking interface and advanced 8-core magnetic isolation circuitry into a single shielded housing, this connector drastically streamlines printed circuit board (PCB) layouts and reduces component count. Operating securely across a rigorous industrial temperature envelope of -40°C to +85°C, it provides an exceptionally stable, non-PoE physical layer connection tailored for fieldbus communication nodes, embedded mainboards, advanced automation systems, and solar inverters.
Manufactured under stringent ISO9001 and ISO14001 quality management systems, the LPJG4843GENL guarantees full compliance with IEEE 802.3ab, UL60950, UL62368, REACH, and RoHS regulatory standards. This ensures that hardware architects are integrating a globally compliant, safe, and environmentally conscious component capable of sustaining dependable high-speed data delivery in harsh environmental conditions.
Halo HFJ11-E1G41E-L12RL Cross-Reference & BOM Optimization
Developed and rigorously tested as an exact form-fit-function compatible replacement for the Halo HFJ11-E1G41E-L12RL, the LPJG4843GENL empowers hardware engineers and procurement teams to secure their component supply chains and mitigate shortages. Delivering an identical PCB footprint, matched electrical impedance, and a precise 10P8C pin-out configuration, this cross-reference component acts as a seamless drop-in alternative. It facilitates rapid integration into existing motherboard layouts without the costly engineering overhead and delays associated with board respins or recertification.
Mechanical Architecture & High-Reliability Contacts
The mechanical envelope of the LPJG4843GENL is meticulously optimized for structural rigidity, spatial efficiency, and superior electromagnetic compatibility (EMC).
- Proprietary Robust Contact Design: The internal contacts feature a minimum of 30 micro-inches of gold plating on the mating area, providing superior resistance against fretting corrosion and mechanical wear over thousands of insertion cycles.
- Port Configuration: Single-port 1x1, extended 10P8C RJ45 interface, Tab-Down orientation for streamlined cable routing in low-profile desktop, DIN-rail, or rack-mount enclosures.
- Mounting Profile: 90-degree right-angle (side entry) utilizing robust Through-Hole Technology (THT) soldering. Reinforced with a dedicated T-post retaining structure designed to absorb the mechanical stress of frequent cable insertions.
- EMI Containment: Enclosed in a heavy-duty metal shield equipped with active EMI grounding tabs. These tabs make direct electrical contact with the metallic chassis bezel, aggressively containing high-frequency electromagnetic interference (EMI) inherent to Gigabit transmission.
- Visual Diagnostics: Equipped with integrated Green and Yellow LEDs, delivering immediate, localized visual feedback for Gigabit link status and network activity directly at the faceplate.
Integrated Gigabit Magnetics & Signal Integrity
Embedding the Ethernet isolation circuitry directly within the shielded RJ45 housing provides vital board-level benefits, optimizing signal integrity for high-speed Gigabit topologies.
- 8-Core Gigabit Magnetics: Internal transformers and common-mode chokes utilize a precision-tuned 8-core topology. It guarantees a minimum Open Circuit Inductance (OCL) of 350µH with 8mA DC bias across the full industrial temperature range, ensuring pristine signal fidelity and minimized return loss.
- 1500Vrms High-Pot Isolation: Delivers standard-compliant high-voltage electrical isolation between the external network cables and the sensitive internal Gigabit PHY transceiver, guarding against destructive ground loops and voltage transients.
- AutoMDIX Support: The internal 1CT:1CT transformer architecture fully supports AutoMDIX protocols, allowing the physical layer to automatically detect and correct straight-through or crossover cable configurations without manual intervention.
Hardware Layout & Routing Considerations
To extract optimal Gigabit performance from the LPJG4843GENL, PCB layout engineers must meticulously route the 100-ohm differential pairs between the Ethernet PHY and the RJ45 pins. Trace lengths must be kept short and precisely matched to prevent phase skew. Because this connector is built to operate reliably in extreme temperatures (-40°C to +85°C), surrounding PCB materials, conformal coatings, and logic components must be carefully selected to align with this industrial thermal endurance profile. Ensure the chassis ground (tied to the connector’s EMI tabs) is physically isolated from the motherboard's digital ground plane to prevent capacitive noise coupling.
Typical Applications
Fusing robust EMI shielding with industrial-grade thermal reliability (-40°C to +85°C) and Gigabit bandwidth, the LPJG4843GENL is the optimal interconnect solution for advanced, mission-critical electronics:
- New Energy & Smart Grid: Advanced solar inverter communication modules, wind turbine controllers, and substation environmental telemetry gateways.
- Industrial Automation: Fieldbus communication nodes, Programmable Logic Controllers (PLCs), and localized machine vision controllers requiring durable physical I/O.
- Embedded Computing: Compact Industrial PCs (IPCs), Single Board Computers (SBCs), and embedded mainboards demanding uncompromised Gigabit signal isolation.
- Networking Infrastructure: High-reliability edge routers, small form-factor network switches, and localized industrial network firewalls.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Download
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































