X Multiple XMH-9771-8813-S3L6T1 Compatible LINK-PP LPJK0071AONL 100/1000 Base-T Tab Up Orange&Green/Yellow Led 1x1 Port Cat6 Magjack RJ 45 Ethernet Connector
P/N:
LPJK0071AONL
Manufacturer:
LINK-PP
Compatible Brand:
X Multiple
Compatible P/N:
LPJK0071AONL
- Compatible Brands: X Multiple
- Number of Ports: 1X1
- Speed: 1000Base-T,10Base-T,100Base-TX
- PoE: Non-PoE
- Latch: Up
- Mounting Type: SMT
- LED Option: Orange&Green / Yellow
- Shield EMI Tabs: YES
- Temperature: 0℃ to 70℃
- P/N: LPJK0071AONL
- Manufacturer: LINK-PP
- Compatible Brand: X Multiple
- Compatible P/N: XMH-9771-8813-S3L6T1
Packaging Details:
N.W/pCS:
0.011kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
800pcs
Carton size:
32*30*31cm
G.W/carton:
8.8kg
Product Specifications
| LINK-PP Part Number: | LPJK0071AONL | X Multiple Part Number | XMH-9771-8813-S3L6T1 |
| Part Status | Active | Connector Type | Jack |
| Number of Positions/Contacts | 12p8c (RJ45, Ethernet) | Application-Lan | Ethernet( Non-PoE ) |
| Number of Ports | 1x1 Port | Speed | 10/100/1000 Base-T |
| Latch | UP | Cores per Port | 12 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | SIDE ENTRY |
| Shield EMI Tabs | With | LED Option | Orange&Green/Yellow Leds |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.531/13.50 | Package Length (Inches/mm) | 1.280/32.50 |
| Package Width (Inches) | 0.654/16.60 | Temperature | 0℃ TO 70℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
Product Engineering Overview
The existing record identifies LINK-PP LPJK0071AONL as a 10/100/1000 Base-T single-port RJ45 connector with integrated magnetics. Its side-entry housing uses PCB mounting, a Tab Up latch and orange/green and yellow.
The record specifies Non-PoE operation and an operating range of 0°C to 70°C. Its listed body dimensions are 16.60 × 32.50 × 13.50 mm; check the board and enclosure together when arranging the connector.
Compatibility and Design Positioning
The existing record positions LPJK0071AONL as a cross-reference and alternative sourcing option for X Multiple XMH-9771-8813-S3L6T1. Compare both official drawings, magnetic characteristics, footprint, LED pins and panel geometry before qualifying a substitution; the listing alone does not prove interchangeability.
Procurement and OEM Qualification
Specify LPJK0071AONL and the applicable drawing revision when requesting samples. Confirm plating, packaging and availability before AVL approval, then validate the connector on the production PCB and in the intended enclosure.
Topology and Physical Packaging
- Interface: One 8P8C RJ45 port with integrated magnetics.
- Mounting: PCB-mounted side-entry assembly.
- Latch: Tab Up; check access after enclosure assembly.
- Indicators: orange/green and yellow.
- Envelope: The record lists 16.60 × 32.50 × 13.50 mm; check the applicable drawing and tolerances.
Magnetics and Electrical Interface
The product table lists a 1CT:1CT turns ratio for RX/TX and specifies Ethernet interfaces supporting AutoMDX operation. Match the applicable pinout and center taps to the selected PHY, and confirm isolation and other electrical requirements in the product documentation.
Mechanical Envelope and PCB Layout Considerations
- Access: Allow plug insertion and latch-release clearance at the board edge.
- Footprint: Match signal, shield and retaining holes to the applicable drawing.
- Shield: Review shield and PCB clearance requirements in the host grounding design.
- Indicators: The product record lists orange/green and yellow indicators. Confirm pin assignments and polarity in the applicable schematic and size current limiting for the host supply.
Design Consideration Comparison
| Architecture | Engineering consideration |
|---|---|
| Integrated magnetics RJ45 | The selected connector determines the combined board footprint and magnetic pinout. |
| Discrete connector and magnetics | Component placement and routing depend on the selected connector, transformer and PHY. |
Application Considerations
| Target Application Profile | Primary Engineering Consideration |
|---|---|
| 10/100 Ethernet equipment | Verify PHY compatibility, signal routing and the board footprint. |
| Enclosed network equipment | Check shield connection, plug access and connector clearance. |
Engineering Verification Checklist
- Compare the PHY interface and transformer pinout with the applicable schematic.
- Check the complete board footprint and board fabrication tolerances.
- Verify shield and retaining-post connections.
- Test mating and latch access in the finished enclosure.
- Verify LED polarity and current limiting.
- Validate isolation, signal integrity and temperature in the assembled system.
Frequently Asked Questions
Which Ethernet speeds are listed for LPJK0071AONL?
The existing product record specifies 10/100/1000 Base-T. Available link modes depend on the host PHY and system configuration.
Can LPJK0071AONL replace X Multiple XMH-9771-8813-S3L6T1?
The existing record positions LPJK0071AONL as a cross-reference and alternative sourcing option for X Multiple XMH-9771-8813-S3L6T1. Compare both official drawings, magnetic characteristics, footprint, LED pins and panel geometry before qualifying a substitution; the listing alone does not prove interchangeability.
What does the side-entry orientation mean for the layout?
Allow plug insertion and latch-release clearance at the board edge. Check the entire footprint and mechanical tolerances against the applicable drawing.
What is the listed component operating range?
The product record lists 0°C to 70°C. Assess the finished system separately.
How are the status LEDs driven?
The product record lists orange/green and yellow indicators. Confirm pin assignments and polarity in the applicable schematic and size current limiting for the host supply.
Does LPJK0071AONL support PoE?
The product record specifies Non-PoE. Select a connector and magnetics rated for the required PoE standard when power over Ethernet is needed.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































