HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJK0072AINL.jpg
  • LPJK0072AINL (2).jpg

LPJK0072AINL 100/1000 Base-T Tab Up Green&Yellow/Green Led 1x1 Port Ethernet RJ-45Connector

P/N:

LPJK0072AINL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJK0072AINL

  • Compatible Brands: LINK-PP
  • Number of Ports: 1X1
  • Speed: 1000Base-T
  • PoE: Non-PoE
  • Latch: Up
  • Mounting Type: THT
  • LED Option: Green&Yellow / Green
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJK0072AINL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LPJK0072AINL

Packaging Details:

N.W/pCS:

0.011kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

800pcs

Carton size:

32*30*31cm

G.W/carton:

8.8kg

Product Specifications

LINK-PP Part Number: LPJK0072AINL Connector Type RJ45 MagJack (Integrated Magnetics)
Part Status Active Mounting Type Through Hole
Number of Positions/Contacts 12P8C (RJ45, Ethernet) Application-LAN Ethernet (Non-PoE)
Number of Ports 1×1 Port Speed 10/100/1000BASE-T
Latch Up Cores per Port 8
Orientation 90° Right Angle PCB Mount Angle Side Entry
Shield EMI Tabs With LED Option Green&Yellow / Green
PCB FR4 PCB Retaining Post T-Post
Package Height (Inches/mm) 0.531 / 13.50 Package Length (Inches/mm) 1.280 / 32.50
Package Width (Inches/mm) 0.654 / 16.60 Operating Temperature 0°C to +70°C
BST Circuit Yes AutoMDX Yes
Diodes No Contact Mating Area Plating Gold 6µ" / 15µ" / 30µ"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T, C

Single-Port 10/100/1000BASE-T RJ45 MagJack

The LINK-PP LPJK0072AINL is a single-port 10/100/1000BASE-T Gigabit Ethernet RJ45 MagJack in a right-angle, side-entry through-hole configuration. The Ethernet interface incorporates an internal 8-core magnetic structure with a 1CT:1CT turns ratio and T, C configuration. The connector also includes Bob Smith termination (BST), AutoMDX support, Green&Yellow / Green status LEDs, and a specified operating temperature range of 0°C to +70°C.

The mechanical package features a housing height of 13.50 mm (0.531 inches), a length of 32.50 mm (1.280 inches), and a width of 16.60 mm (0.654 inches). Designed with a 12P8C through-hole footprint, Tab-Up latch orientation, perimeter shield EMI tabs, and molded T-Posts for PCB retention, the LPJK0072AINL provides a compact board-level physical interface suited for solar inverters, building entrance guard systems, smart cameras, fieldbus gateways with Ethernet interfaces, and commercial game controllers.

Lifecycle: Active
Ethernet Speed: Single-Port 10/100/1000BASE-T
Mounting & Latch: Through Hole (THT) / Tab-Up
LED Configuration: Green&Yellow / Green
Operating Temperature: 0°C to +70°C Commercial
Sourcing Position: Alternative Sourcing / Second-Source Evaluation

Design Positioning and Qualification

The LPJK0072AINL is designed as an integrated RJ45 MagJack for hardware platforms requiring through-hole PCB termination, Gigabit Ethernet data rates, and a commercial 0°C to +70°C operating temperature range. It can be evaluated for new hardware designs, BOM consolidation, or as an alternative sourcing option for existing 12P8C 10/100/1000BASE-T Tab-Up designs using comparable mechanical and electrical requirements. Engineering teams should verify pinout mapping, PCB land patterns, LED drive circuits, and mechanical clearances against the official LINK-PP technical drawing before approving production release.

Procurement and OEM Qualification

For procurement teams, sourcing specialists, and OEM hardware programs evaluating the LPJK0072AINL, qualification activities typically center on BOM qualification, second-source risk mitigation, and production readiness. LINK-PP can support design qualification through mechanical drawing review, sample evaluation, and technical documentation required for prototype validation, approved vendor list (AVL) entry, and volume production planning. Sourcing teams should verify lead-time requirements, applicable packaging requirements, and contact plating selection (6µ", 15µ", or 30µ") based on project lifecycle demands.

Tab-Up Latch Topology and Enclosure Front-Panel Optimization

Integrating Gigabit magnetics into a Tab-Up RJ45 connector assembly provides practical packaging and mechanical layout considerations for embedded hardware:

  • Tab-Up Latch Orientation: The RJ45 plug release latch is positioned on the upper side of the port, which can improve release-tab accessibility in board-edge layouts when sufficient enclosure clearance is provided.
  • 13.50 mm Vertical Height: The 13.50 mm (0.531 inches) housing height supports space-constrained board-edge and embedded hardware designs where enclosure clearance is limited.
  • 0°C to +70°C Operating Range: The 0°C to +70°C specification defines the stated operating temperature range of the connector assembly. Final system qualification should consider the expected internal equipment temperature together with the PHY, PCB, enclosure, and airflow conditions.
  • EMI Tabs & T-Post Retention: The metal shield includes perimeter EMI tabs that can be incorporated into the system-level chassis and EMC design, while molded T-Post features help locate and mechanically retain the connector on the host PCB.

Internal Magnetics Architecture, Gigabit Signaling, and AutoMDX

The Ethernet port incorporates an internal 8-core magnetic structure with a 1CT:1CT turns ratio and T, C configuration. The integrated magnetics provide the electrical interface between the Gigabit Ethernet PHY and the cable-side RJ45 connection while reducing the need for separate discrete magnetic components on the host board.

The connector includes a Bob Smith termination (BST) circuit and is specified for Ethernet interfaces supporting AutoMDX operation. Hardware designers should evaluate the MagJack together with the selected PHY reference design, differential-pair routing, PCB grounding, and system-level EMC requirements. The LPJK0072AINL is specified for non-PoE Ethernet applications.

Mechanical Envelope and PCB Layout Considerations

When integrating the LPJK0072AINL into host hardware layouts, engineering teams should observe the following structural and layout parameters:

1. Package Dimensions and Front-Panel Cutout

The connector body measures 13.50 mm (0.531 inches) in height, 32.50 mm (1.280 inches) in length, and 16.60 mm (0.654 inches) in width. Front-panel openings should provide appropriate clearance for the connector shield profile, EMI tabs, and cable plug access.

2. Tab-Up Latch Headroom and Servicing

Because the release latch is oriented on the top face, designers should provide adequate vertical clearance above the connector port to ensure field technicians can access and depress the plug latch during servicing.

3. 12P8C Interface and PCB Footprint

The connector provides an 8P8C RJ45 Ethernet interface together with a 12P8C through-hole PCB termination pattern accommodating Gigabit differential pairs, shield grounding, and status LED pins. Designers should use the official LPJK0072AINL drawing to verify terminal numbering, drill-hole diameters, T-Post locations, and follow the manufacturer's recommended copper keep-out and clearance requirements on the host PCB.

4. Status LED Interface

The connector includes Green&Yellow bi-color and Green status LEDs. Hardware engineers should verify LED pin assignment, polarity, drive requirements, and any required external components against the LPJK0072AINL electrical documentation and the selected PHY reference design.

Design Consideration Comparison: Integrated MagJack vs. Discrete Solution

Design Consideration LPJK0072AINL
Integrated Tab-Up MagJack
Discrete Gigabit Magnetics
+ Modular RJ45 Jack
Component Integration Magnetics and RJ45 connector integrated in one housing Separate magnetic transformer and modular RJ45 jack
PCB Assembly Single integrated connector assembly Separate magnetics and RJ45 connector components
Connector Selection Integrated RJ45 port geometry Flexible external connector selection
Board-Edge Layout Consolidated footprint at board edge Requires trace routing between discrete magnetics and connector
Vertical Height Envelope Fixed 13.50 mm profile Model-dependent
Front-Panel Shielding Integrated metal shield with perimeter EMI tabs Dependent on chosen external RJ45 shield design
Primary Engineering Focus Consolidated 10/100/1000BASE-T interface and integrated connector architecture Independent component placement and routing flexibility, depending on the selected implementation

Application Considerations for LPJK0072AINL

Target Application Profile Primary Engineering Consideration
Solar Inverters & Energy Management Integrated 10/100/1000BASE-T magnetics and BST circuitry provide a consolidated Ethernet physical interface for network-enabled energy and monitoring equipment.
Entrance Guard & Access Control Terminals Tab-Up latch orientation supports board-edge connector layouts, while perimeter shield tabs assist with system-level grounding and EMC design.
Fieldbus Gateways with Ethernet Interfaces Integrates 10/100/1000BASE-T magnetics and status LEDs within a single through-hole RJ45 connector assembly for Ethernet-enabled gateway hardware.
Smart Cameras & Dedicated Game Controllers Green&Yellow bi-color and Green LEDs can be configured through the host PHY for supported link, speed, or activity indication functions.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials using the LPJK0072AINL, hardware engineers should confirm the following design parameters against official documentation:

  • Footprint and Pinout Verification: Verify the RJ45 interface connections, PCB terminal numbering, LED connections, T-Post locations, shield connections, and drill-hole dimensions against the official LINK-PP LPJK0072AINL drawing.
  • Tab-Up Headroom Clearance: Confirm that the enclosure cutout provides sufficient vertical clearance above the port for cable plug latch engagement and release.
  • LED Interface Verification: Verify the Green&Yellow and Green LED pin assignment, polarity, drive requirements, and host PHY configuration against the applicable documentation.
  • Shield and Chassis Grounding: Verify the connector shield-pin and EMI-tab implementation against the host system grounding, enclosure, and EMC design requirements.
  • PHY Magnetics Compatibility: Confirm that the 1CT:1CT turns ratio and BST termination topology align with the transceiver manufacturer's reference schematic.
  • Thermal Environment: Ensure that the operating environment inside the equipment chassis remains within the specified 0°C to +70°C commercial temperature range.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LPJK0072AINL?

The LPJK0072AINL is a single-port 10/100/1000BASE-T non-PoE Ethernet RJ45 MagJack. It features a 12P8C through-hole PCB termination footprint, 8-core integrated magnetics, a 1CT:1CT turns ratio, Tab-Up latch orientation, side-entry through-hole mounting, Green&Yellow / Green LEDs, an integrated BST circuit, AutoMDX support, and a specified operating temperature range of 0°C to +70°C.

Can the LPJK0072AINL be evaluated as an alternative sourcing option in existing designs?

Yes. The LPJK0072AINL can be evaluated as an alternative sourcing option for 12P8C 10/100/1000BASE-T Tab-Up RJ45 MagJack designs with comparable mechanical and electrical requirements. Engineering teams should cross-reference pinout mapping, package dimensions (13.50 mm height, 32.50 mm length, 16.60 mm width), electrical characteristics, and mechanical clearances against official manufacturer drawings before approving component substitution.

What are the advantages of the Tab-Up latch orientation in board-edge layouts?

A Tab-Up orientation places the RJ45 plug release latch on the upper side of the connector. This can improve access to the release tab in board-edge designs where sufficient clearance is available above the connector. Enclosure geometry should be verified against the product drawing.

What is the function of the internal 8-core magnetics architecture?

The LPJK0072AINL specifies an 8-core integrated magnetic structure for its Gigabit Ethernet interface, with a 1CT:1CT turns ratio and T, C configuration. The integrated magnetics provide the electrical interface between the Ethernet PHY and the cable-side RJ45 connection. Engineers should refer to the applicable LINK-PP schematic and electrical documentation for the exact magnetic topology and termination arrangement.

How are the Green&Yellow and Green LEDs driven on the host PCB?

The connector includes Green&Yellow bi-color and Green status indicators. The LED functions should be configured according to the host PHY reference design and the connector's electrical specifications. Depending on the selected LED control scheme, the indicators may be used for link speed, link status, or activity indication.

Does the LPJK0072AINL support Power over Ethernet (PoE)?

No. The LPJK0072AINL is specified for non-PoE Ethernet data interfaces. For applications requiring PoE power delivery, a connector and magnetics solution specifically rated for the required IEEE 802.3 PoE standard and DC current conditions should be selected.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.