HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJG0801ABNL1.jpg
  • LPJG0801ABNL2.jpg
  • 左绿右黄10p(1712557475253).jpg
  • 左绿右黄10p (2).JPG
  • LPJG0801ABNL.jpg

LPJG0801ABNL RJ45 Gigabit Magnetics Jack 1000 Base-T Single Port Tab Down Green/Yellow Led

P/N:

LPJG0801ABNL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJG0801ABNL

  • Compatible Brands: LINK-PP
  • Number of Ports: 1X1
  • Speed: 1000Base-T,10Base-T,100Base-TX
  • PoE: Non-PoE
  • Latch: Down
  • Mounting Type: THT
  • LED Option: Green / Yellow
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJG0801ABNL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LPJG0801ABNL

Packaging Details:

N.W/pCS:

0.008kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1200pcs

Carton size:

32*30*31cm

G.W/carton:

9kg

Product Specifications

LINK-PP Part Number: LPJG0801ABNL Connector Type Jack
Part Status Active Mounting Type Through Hole
Number of Positions/Contacts 10p8c (RJ45, Ethernet) Application-Lan Ethernet(Non-PoE)
Number of Ports 1x1 Port Speed 10/100/1000 Base-T
Latch Down Cores per Port 8
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs With LED Option Green/Yellow
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.528/13.40 Package Length (Inches/mm) 0.839/21.30
Package Width (Inches/mm) 0.626/15.90 Temperature 0℃ TO 70℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

Product Engineering Overview

The LINK-PP LPJG0801ABNL is a 10/100/1000BASE-T RJ45 jack with integrated magnetics listed for Non-PoE Ethernet applications. Its mechanical configuration combines through hole mounting with a Tab-Down latch and Green/Yellow LEDs. Review the numbered signal paths and center-tap connections against the host PHY circuit before choosing the PCB footprint.

The drawing identifies PHY-side pair and center-tap terminals separately from the shield connection. Compare that map with the host PHY circuit rather than assuming that a similar single-port enclosure defines an identical electrical interface.

Interface: 10/100/1000BASE-T
Power application: Non-PoE
Mounting: Through Hole
Latch / LEDs: Tab-Down / Green/Yellow
Operating temperature: 0℃ TO 70℃
Drawing revision: Rev A

Design Positioning and Qualification

The LPJG0801ABNL can be evaluated for existing 10/100/1000BASE-T designs using comparable mechanical and electrical requirements. No specific third-party replacement is established on this page. Qualify the actual host board rather than relying on a presumed standard footprint.

Electrical and Mechanical Integration

  • PHY connections: Compare signal pairs, polarity and center-tap connections with the host PHY reference circuit. The passive component does not implement network protocols.
  • PCB layout: Use the model-specific recommended footprint, pin-1 datum and clearances. Follow the manufacturer's copper keep-out and clearance requirements.
  • Enclosure and indicators: Check latch-release access, cable boots, shield contacts and the specified LED configuration. Size LED current limiting from the driver supply and documented forward voltage.
  • Power and environment: Non-PoE is the listed application. Confirm electrical limits and operating conditions within the complete host design.

Procurement and OEM Qualification

Use LPJG0801ABNL and the agreed drawing revision on the sample request, BOM and purchase documentation. Evaluate samples on the target board, record electrical and assembly results, and complete the approved-vendor review before production release. Confirm quantities, packaging and the delivery schedule for the actual order rather than assuming lifecycle status establishes availability.

Engineering Verification Checklist

  1. Confirm the full part number and drawing revision.
  2. Review all signal pairs, center taps and host PHY connections.
  3. Verify the footprint, terminal numbering and pin-1 orientation.
  4. Check panel opening, latch access, LED polarity and shield connections.
  5. Confirm Non-PoE application requirements and the component operating range.
  6. Validate samples on the intended board and record the production approval.

Frequently Asked Questions

What is LPJG0801ABNL used for?

The LINK-PP LPJG0801ABNL is a 10/100/1000BASE-T RJ45 jack with integrated magnetics listed for Non-PoE Ethernet applications. Its mechanical configuration combines through hole mounting with a Tab-Down latch and Green/Yellow LEDs.

Can LPJG0801ABNL use the footprint of another Tab-Down Gigabit jack?

Do not assume so. Compare the complete hole pattern, retaining posts, shield contacts, signal and center-tap map, and LED polarity using both model drawings before making a board substitution.

Does LPJG0801ABNL support Power over Ethernet (PoE)?

The supplied specification identifies LPJG0801ABNL for Non-PoE Ethernet applications. Do not assign a PoE rating to it from the interface or package alone; a powered design requires a documented magnetic and power-path rating for the intended application.

Does LPJG0801ABNL perform AutoMDX switching?

No. It is a passive magnetic component within a connector assembly. The AutoMDX field refers to its use with an Ethernet interface supporting AutoMDX operation; pair detection and switching are functions of the host PHY.

What should be supplied when requesting LPJG0801ABNL samples or a quotation?

Provide the complete part number, target quantity, host interface and required drawing revision. Confirm sample configuration, commercial terms and delivery schedule with LINK-PP; this page does not establish stock, MOQ or a fixed lead time.

Does the operating temperature rating qualify the complete host system?

No. The specification lists 0℃ TO 70℃ for this component. Check ambient conditions, assembly heating and the operating limits of the PHY, connector and surrounding electronics on the target equipment.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.