HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • HY911137A.jpg
  • 7499110122.jpg
  • 7499110122 We.jpg
  • network rj45.jpg
  • HY911137A Hanrun.jpg

HY911137A Compatible LINK-PP LPJG0803FDNL 100/1000 Base-T Tab Down Yellow/Green Led Single Port Shielded RJ 45 Networking

P/N:

LPJG0803FDNL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJG0803FDNL

  • Number of Ports: 1X1
  • Speed: 1000Base-T
  • PoE: Non-PoE
  • Latch: Down
  • Mounting Type: SMT
  • LED Option: Yellow / Green
  • Shield EMI Tabs: NO
  • Temperature: 0℃ to 70℃
  • P/N: LPJG0803FDNL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: HY911137A

Packaging Details:

N.W/pCS:

0.008kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1200pcs

Carton size:

32*30*31cm

G.W/carton:

9kg

Product Specifications

LINK-PP Part Number: LPJG0803FDNL Part Number HY911137A
Part Status Active Connector Type Jack
Number of Positions/Contacts 10p8c (RJ45, Ethernet) Application-Lan Ethernet(NoN PoE)
Number of Ports 1x1 Port Speed 10/100/1000 Base-T
Latch Down Cores per Port 12
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs Without LED Option Yellow/Green
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.524/13.30 Package Length (Inches/mm) 0.837/21.25
Package Width (Inches/mm) 0.627/15.93 Temperature 0℃ TO 70℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

Single-Port 10/100/1000BASE-T RJ45 MagJack

The LINK-PP LPJG0803FDNL is a single-port 10/100/1000 Base-T Gigabit Ethernet RJ45 integrated connector module (MagJack) in a right-angle, side-entry through-hole configuration. Designed with an internal 12-core magnetic structure, 1CT:1CT turns ratio, integrated Bob Smith termination (BST), and AutoMDX support, the connector supports IEEE 802.3-compliant Ethernet signal isolation and common-mode noise suppression across the specified 0℃ TO 70℃ operating temperature range.

The mechanical assembly features a Tab-Down latch orientation, a smooth metal shield without perimeter EMI tabs, Yellow/Green status LEDs, and molded T-Post retaining pins. With dimensions of 13.30 mm (0.524 inches) in height, 15.93 mm (0.627 inches) in width, and 21.25 mm (0.837 inches) in length, the LPJG0803FDNL provides a standardized physical interface suited for industrial PCs (IPCs), fieldbus communication gateways, factory automation systems, network firewalls, and digital cameras.

Lifecycle: Active
Ethernet Speed: Single-Port 10/100/1000 Base-T
Cross Reference: HY911137A
Mounting & Latch: Through Hole (THT) / Tab-Down
Operating Temperature: 0℃ TO 70℃ Commercial
Qualification Support: Sample Evaluation / Second Source

Compatibility and Design Positioning

The LINK-PP LPJG0803FDNL is positioned as a cross-reference and alternative sourcing option for the HY911137A single-port 10/100/1000 Base-T RJ45 MagJack. The two devices share key characteristics including 10P8C through-hole construction, Tab-Down orientation, 1CT:1CT turns ratio, a 12-core magnetic architecture, Yellow/Green LED configuration, commercial 0℃ TO 70℃ operating temperature rating, and an un-tabbed shield exterior. Engineering teams should verify pin assignments, footprint dimensions, LED circuitry, and mechanical tolerances against the applicable official drawings before approving component substitution.

Procurement and OEM Qualification

For sourcing teams and OEM engineering programs evaluating the LPJG0803FDNL as a second-source or BOM alternative, key qualification parameters include PCB mechanical footprint, pinout alignment, LED drive characteristics, electrical isolation parameters, operating temperature rating, and expected volume demand. LINK-PP can support sample evaluation, mechanical drawing review, and documentation requirements for prototype validation, AVL qualification, and volume production planning.

Tab-Down Latch Topology and Enclosure Front-Panel Optimization

Integrating Gigabit magnetics into a standardized Tab-Down connector format provides practical packaging and mechanical advantages for embedded systems:

  • Board-Edge Ergonomics: The Tab-Down latch positions the RJ45 plug release latch on the lower edge, preventing mechanical conflict with upper enclosure bezels, display frames, or protruding chassis overhangs during cable disconnection.
  • 13.30 mm Vertical Height: The 13.30 mm (0.524 inches) housing height supports space-constrained board-edge and embedded hardware designs where enclosure clearance is limited.
  • 0℃ TO 70℃ Commercial Operating Range: The 0℃ TO 70℃ specification defines the stated operating temperature range of the connector assembly, supporting commercial computing, automation, and networking equipment.
  • Smooth Shield Without EMI Tabs: A tab-less shield exterior prevents mechanical snagging, binding, or bending during insertion into tight enclosure cutouts, plastic bezels, or sealed faceplates.
  • Mechanical T-Post Retention: Molded plastic posts help align the connector during assembly and distribute mechanical insertion and extraction stresses directly into the FR4 PCB substrate.

Internal Magnetics Architecture, 12-Core Gigabit Signaling, and AutoMDX

The LPJG0803FDNL incorporates an internal 12-core magnetic architecture supporting the four differential pairs required for 10/100/1000 Base-T full-duplex Ethernet communication. A symmetrical 1CT:1CT turns ratio across transmit and receive stages in a T, C configuration enables broad interface compatibility with standard voltage-mode and current-mode Gigabit PHY transceivers.

The integrated magnetics include Bob Smith termination (BST) to help manage common-mode noise, while AutoMDX support enables automatic differential pair crossover detection. Electrical isolation complies with IEEE 802.3 specifications as defined in the product documentation, separating PHY circuitry from line-side transients and cable common-mode noise. The non-PoE data architecture is optimized exclusively for differential high-speed data transmission without DC bias heating.

Mechanical Envelope and PCB Layout Considerations

When integrating the LPJG0803FDNL into host hardware layouts, engineering teams should account for the following structural and electrical parameters:

1. Package Dimensions and Front-Panel Cutout

The connector body measures 13.30 mm (0.524 inches) in height, 21.25 mm (0.837 inches) in length, and 15.93 mm (0.627 inches) in width. Because the metal shield lacks external spring fingers, the enclosure opening can be engineered with closer tolerances matching the outer body envelope.

2. Tab-Down Latch Headroom

Because the release latch is oriented on the bottom face, designers should provide adequate clearance beneath the connector port to ensure field technicians can easily depress the plug latch during servicing.

3. 10P8C Footprint and Through-Hole Layout

The connector utilizes a through-hole pin arrangement accommodating Gigabit differential pairs and status LED lines. Verification of drill hole diameters and tolerance spacing against the official footprint drawing is essential to ensure proper mechanical seating and solder joint reliability.

4. Status LED Circuitry

The connector features Yellow and Green status indicators. Hardware engineers should implement suitable series current-limiting resistors matching the host PHY LED driver polarity and target forward current specifications.

Design Consideration Comparison: Integrated MagJack vs. Discrete Solution

Design Consideration LPJG0803FDNL
Integrated Tab-Down MagJack
Discrete Gigabit Magnetics
+ Modular RJ45 Jack
Component Integration Gigabit magnetics and RJ45 connector integrated in one housing Separate magnetic transformer and modular RJ45 jack
PCB Assembly Operations Single through-hole placement Multiple placements (SMD transformer + through-hole jack)
Board-Edge Layout Consolidated footprint at board edge Requires trace routing between discrete magnetics and connector
Vertical Height Envelope Fixed 13.30 mm profile Variable based on selected modular jack profile
Front-Panel Shielding Integrated tab-less metal shield (smooth outer profile) Dependent on chosen external RJ45 shield design
Primary Engineering Focus Compact layout, unified assembly, standard Gigabit I/O Custom physical placement flexibility across board zones

Application Considerations for LPJG0803FDNL

Target Application Profile Primary Engineering Consideration
Industrial PCs & Fieldbus Systems Tab-Down latch orientation prevents mechanical conflict with upper enclosure lips and display bezels.
Factory Automation & Robotics Controllers Integrated 12-core magnetics support signal integrity across high-density Gigabit Ethernet front panels.
Network Firewalls & Edge Routers Smooth tab-less shield slides cleanly into flush faceplates and non-conductive plastic bezels.
Digital Cameras & Commercial Imaging Yellow and Green LEDs provide visual indication for Ethernet link status and active data transmission.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials using the LPJG0803FDNL, hardware engineers should confirm the following design parameters against official documentation:

  • Footprint and Pinout Verification: Verify pinout mapping, LED pin locations, and T-Post drill sizes against the official LINK-PP LPJG0803FDNL drawing.
  • Tab-Down Headroom Clearance: Confirm that the enclosure cutout provides sufficient vertical clearance beneath the port for cable plug latch engagement and release.
  • LED Drive Polarity and Resistors: Check the host PHY LED driver configuration (active-high or active-low) and select appropriate series resistors for the Yellow and Green LEDs.
  • Chassis Grounding Path: Verify that the PCB shield pins connect to a low-impedance chassis ground plane to provide grounding continuity without external EMI tabs.
  • PHY Magnetics Compatibility: Confirm that the 1CT:1CT turns ratio and BST termination topology align with the transceiver manufacturer's reference schematic.
  • Thermal Environment: Ensure that the operating environment inside the equipment chassis remains within the specified 0℃ TO 70℃ commercial temperature range.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LPJG0803FDNL?

The LPJG0803FDNL is a single-port 10/100/1000 Base-T Gigabit Ethernet(NoN PoE) RJ45 MagJack. It features an 8P8C contact configuration, 12-core internal magnetics, 1CT:1CT turns ratio, Tab-Down latch orientation, side-entry through-hole mounting, a metal shield without EMI tabs, Yellow/Green LEDs, integrated BST circuit, AutoMDX support, and an operating temperature range of 0℃ TO 70℃.

Is the LINK-PP LPJG0803FDNL compatible with the HY911137A?

The LPJG0803FDNL is positioned as a cross-reference and alternative sourcing option for the HY911137A. Both devices share matching through-hole footprints, 1CT:1CT turns ratios, 12-core magnetic architectures, Tab-Down latch profiles, Yellow/Green LED configurations, and un-tabbed metal shields. Engineering teams should cross-reference official product drawings before volume changeovers.

What is the function of the internal 12-core magnetics architecture?

The LPJG0803FDNL uses a 12-core integrated magnetic architecture to support signal coupling, electrical isolation, and common-mode noise suppression across the four differential pairs required for Gigabit Ethernet. Detailed transformer and choke construction should be referenced to the applicable LINK-PP electrical documentation.

Why does the shield feature a design without EMI tabs?

A shield without exterior spring EMI tabs provides a smooth outer surface that easily fits into tight enclosure openings, plastic bezels, or sealed rubber gaskets without catching or bending tabs. Chassis grounding is achieved through dedicated through-hole ground pins soldered directly into the PCB.

How does the Tab-Down latch orientation affect front-panel design?

A Tab-Down latch positions the RJ45 plug release latch on the underside of the connector. This orientation avoids mechanical interference with upper enclosure bezels, display frames, or protruding chassis lips, making it easier for technicians to disconnect network cables in compact equipment.

How are the Yellow and Green LEDs driven on the host PCB?

The connector includes separate Yellow and Green status indicators. The LED functions should be configured according to the host PHY reference design and the connector's electrical specifications. Depending on the selected LED control scheme, the indicators may be used for link speed, link status, or activity indication.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.