HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • HR901130A Hanrun.jpg
  • HR901130A.jpg
  • rj45 conecter.jpg
  • rj45 jack connector.jpg
  • rj45 jacks(1712539578398).jpg

HR901130A Compatible LINK-PP LPJG0806DNL 100/1000 Base-T Single Port magjack rj45 Tab Down Without Led

P/N:

LPJG0806DNL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJG0806DNL

  • Number of Ports: 1X1
  • Speed: 1000Base-T
  • PoE: Non-PoE
  • Latch: Down
  • Mounting Type: SMT
  • LED Option: No LEDs
  • Shield EMI Tabs: NO
  • Temperature: 0℃ to 70℃
  • P/N: LPJG0806DNL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: HR901130A

Packaging Details:

N.W/pCS:

0.008kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1200pcs

Carton size:

32*30*31cm

G.W/carton:

9kg

Product Specifications

LINK-PP Part Number: LPJG0806DNL Part Number HR901130A
Part Status Active Connector Type Jack
Number of Positions/Contacts 10p8c (RJ45, Ethernet) Application-Lan Ethernet(NoN PoE)
Number of Ports 1x1 Port Speed 10/100/1000 Base-T
Latch Down Cores per Port 8
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs Without LED Option Without
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.528/13.40 Package Length (Inches/mm) 0.839/21.30
Package Width (Inches/mm) 0.626/15.90 Temperature 0℃ TO 70℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

HanRun HR901130A Compatible LINK-PP LPJG0806DNL Non-LED Gigabit RJ45 Magjack Technical Overview

The LINK-PP LPJG0806DNL (engineered as a direct 100% pin-to-pin drop-in replacement for HanRun Electronics HR901130A) is a single-port (1x1) Tab-Down non-LED female RJ45 Integrated Connector Module (ICM) with built-in Gigabit 100/1000 Base-T magnetics, a smooth metal shield (without EMI tabs), and a Bob Smith Termination (BST) circuit. Compliant with IEEE 802.3ab standards, it integrates an 8-core transformer/choke matrix (1CT:1CT turns ratio) across 4 differential pairs, delivering 1 Gbps full-duplex transmission, 1500Vrms isolation, and ESD protection for Industrial PCs, fieldbus automation systems, digital cameras, and routers.

  • Gigabit Ethernet Magnetics Architecture: 10p8c RJ45 connector integrated with an 8-core magnetic matrix (1CT:1CT turns ratio) supporting 1000BASE-T full-duplex communication over Cat5e/Cat6 wiring.
  • Non-LED Streamlined Housing Profile: Clean non-LED faceplate design eliminates optical light bleed in dark environments or enclosed chassis, with commercial thermal endurance (0°C to +70°C).
  • Built-In Circuit Protection & Noise Rejection: Features an integrated Bob Smith Termination (BST) network and Auto-MDIX logic for enhanced common-mode EMI suppression and automatic cable crossover detection.
  • Direct Cross-Reference Replacement: Fully qualified footprint and electrical drop-in replacement for HanRun Electronics HR901130A for BOM cost optimization and secondary sourcing.

LINK-PP LPJG0806DNL Gigabit Female RJ45 Magjack Connector Overview

LINK-PP LPJG0806DNL is a right-angle side-entry 1x1 Tab-Down non-LED female RJ45 integrated connector module (ICM) designed for non-PoE Gigabit Ethernet networking platforms. Housing signal transformers, common-mode chokes, and Bob Smith Termination directly inside a metal-shielded jack without EMI tabs, this connector simplifies motherboard layout by replacing discrete PHY magnetics. It provides a highly reliable, pin-compatible secondary-source alternative to HanRun HR901130A in Industrial PCs, fieldbus automation modules, machine vision digital cameras, and network firewalls.

Key Benefits of LINK-PP LPJG0806DNL / HanRun HR901130A Compatible Magjack

  • Full Gigabit 1000BASE-T Speed (IEEE 802.3ab): Embeds an 8-core transformer and common-mode choke matrix that isolates and filters 4 differential pairs, ensuring clean 1 Gbps eye diagrams with minimal differential insertion loss.
  • Non-LED Housing Design Eliminates Optical Light Leakage: Streamlined enclosure profile without optical LEDs is ideal for dark-room equipment, set-top boxes, and sealed industrial enclosures.
  • Tab-Down Mechanical Latch & Smooth Metal Shield (Without EMI Tabs): Engineered without external EMI spring tabs, enabling clean, flush insertion into front-panel bezel cutouts with low insertion force.
  • Fully Integrated Magjack ICM Architecture (Reduces SMT Component Count): Consolidates discrete isolation transformers, common-mode chokes, resistors, and capacitors inside the RJ45 jack, reducing motherboard component count and SMT placement cycles.
  • Integrated Bob Smith Termination (BST) & Auto-MDIX: Built-in 75-ohm BST circuit routes common-mode EMI noise and ESD transients safely to ground, while Auto-MDIX logic supports automatic straight-through or crossover cable detection.
  • Direct Second Sourcing for HanRun Electronics HR901130A: Identical 10p8c through-hole PCB land pattern and pinout allow seamless drop-in secondary sourcing to reduce procurement lead times.

Integrated Magnetics & 1000BASE-T Signal Architecture

The LINK-PP LPJG0806DNL utilizes an advanced Gigabit Integrated Connector Module (ICM) architecture that embeds 1000BASE-T magnetics directly behind the 10p8c contact pins, eliminating high-frequency noise radiation caused by long trace runs on the motherboard.

8-Core Gigabit Transformer & Choke Configuration

Featuring a 1CT:1CT transmit and receive turns ratio with 8 magnetic cores per port, the LPJG0806DNL establishes 1500Vrms galvanic isolation between the Ethernet PHY transceiver chip and the external network cable. The 8-core layout provides precise impedance matching across transmit and receive differential pairs, suppressing inter-channel crosstalk and common-mode noise.

Bob Smith Termination (BST) & ESD Rejection

The integrated Bob Smith Termination (BST) network utilizes high-voltage capacitors and precision resistors to balance line impedance on unused cable pairs. This prevents common-mode noise reflection, reduces radiated EMI emissions, and enhances system ESD immunity during cable plugging.

PCB Mounting & Mechanical Specifications

Designed for automated Through-Hole Technology (THT) assembly, the LPJG0806DNL incorporates robust mechanical features to ensure structural integrity on FR4 substrates.

Tab-Down Latch Geometry & Package Dimensions

With package dimensions of 13.40mm H x 21.30mm L x 15.90mm W, the LPJG0806DNL provides a compact footprint. The non-LED faceplate aligns cleanly with front-panel cutouts, while T-Post mechanical pegs anchor the housing firmly to the motherboard during cable plugging.

Target Applications: Industrial PCs, Fieldbus Systems, and Digital Cameras

Combining IEEE 802.3ab Gigabit speed, BST noise suppression, non-LED profile, and HanRun HR901130A compatibility, the LINK-PP LPJG0806DNL supports diverse embedded systems:

  • Industrial PCs (IPC) & Fieldbus Automation Gateways: Ideal for industrial single-board computers, Modbus/PROFINET fieldbus gateways, and programmable logic controllers (PLCs).
  • Machine Vision Digital Cameras & Surveillance Systems: Deployed in industrial machine vision cameras, smart inspection cameras, and outdoor video gateways.
  • Commercial Routers & Industrial Network Switches: Suitable for commercial security firewalls, industrial Wi-Fi routers, and automation controllers.

How to Select and Verify LPJG0806DNL vs. HanRun HR901130A

Hardware design engineers and procurement specialists evaluating the LINK-PP LPJG0806DNL as a second-source replacement for HanRun Electronics HR901130A should verify the following core parameters:

  • 8-Core Gigabit Magnetics Compatibility: Confirm that an 8-core magnetic matrix (4 differential pairs) and a 1CT:1CT turns ratio match your Gigabit Fast Ethernet PHY transceiver reference design.
  • Non-LED Configuration Check: Verify that your system enclosure design does not rely on integrated LEDs inside the RJ45 jack housing.
  • Mechanical Latch & Footprint Alignment: Verify that the Tab-Down latch direction, 10p8c through-hole pin arrangement, and T-Post peg locations match the HR901130A PCB land pattern.
  • Package Height Clearance: Ensure that the 13.40mm package height fits within your front-panel bezel window.

Frequently Asked Questions

Is LINK-PP LPJG0806DNL compatible with HanRun Electronics HR901130A?

Yes. LINK-PP LPJG0806DNL is a direct functional, electrical, and footprint drop-in replacement for HanRun Electronics HR901130A, featuring the same 1x1 Tab-Down Gigabit 1000BASE-T Magjack layout without LEDs.

Does LINK-PP LPJG0806DNL support Gigabit Ethernet (1000BASE-T)?

Yes. LPJG0806DNL is equipped with an 8-core magnetic matrix supporting 10/100/1000 Base-T full-duplex Gigabit Ethernet data rates compliant with IEEE 802.3ab standards.

Does LINK-PP LPJG0806DNL include integrated status LEDs?

No. LPJG0806DNL is a Non-LED RJ45 Magjack variant, designed for applications where visual LED status indicators are not required.

What is the function of the integrated Bob Smith Termination (BST) circuit in LPJG0806DNL?

The integrated Bob Smith Termination (BST) circuit utilizes built-in resistors and capacitors to balance line impedance on unused cable pairs, suppressing common-mode EMI noise and protecting the Ethernet PHY against ESD transients.

What contact gold plating options are available for LPJG0806DNL?

LINK-PP offers LPJG0806DNL with gold plating thickness options of Gold 6u", 15u", or 30u" in the contact mating area to meet different insertion durability and corrosion resistance specifications.

Is LINK-PP LPJG0806DNL a Power over Ethernet (PoE) connector?

No. LPJG0806DNL is a Non-PoE Gigabit RJ45 Magjack designed strictly for Ethernet signal transmission and isolation without DC power delivery.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.