LPJG0806EBNL 1000 Base-T Modular RJ45 Connector Tab Down Green/Yellow LED
P/N:
LPJG0806EBNL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJG0806EBNL
- Compatible Brands: LINK-PP
- Number of Ports: 1X1
- Speed: 1000Base-T
- PoE: Non-PoE
- Latch: Down
- Mounting Type: SMT
- LED Option: Green / Yellow
- Shield EMI Tabs: YES
- Temperature: 0℃ to 70℃
- P/N: LPJG0806EBNL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LPJG0806EBNL
Packaging Details:
N.W/pCS:
0.008kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1200pcs
Carton size:
32*30*31cm
G.W/carton:
9kg
Product Specifications
| LINK-PP Part Number: | LPJG0806EBNL | Connector Type | Jack |
| Part Status | Active | Mounting Type | Through Hole |
| Number of Positions/Contacts | 10p8c (RJ45, Ethernet) | Application-Lan | Ethernet(NoN PoE) |
| Number of Ports | 1x1 Port | Speed | 10/100/1000 Base-T |
| Latch | Down | Cores per Port | 8 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | SIDE ENTRY |
| Shield EMI Tabs | With | LED Option | Green/Yellow |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.524/13.30 | Package Length (Inches/mm) | 0.837/21.25 |
| Package Width (Inches/mm) | 0.627/15.93 | Temperature | 0℃ TO 70℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
LINK-PP LPJG0806EBNL Technical Overview
The LINK-PP LPJG0806EBNL is a single-port (1x1) Tab-Down RJ45 Integrated Connector Module (ICM) with built-in 10/100/1000BASE-T Gigabit Ethernet magnetics and integrated Green/Yellow status LEDs. Engineered with an 8-core magnetic assembly (1CT:1CT turns ratio), a Bob Smith Termination (BST) circuit, and a metal shield equipped with external EMI spring tabs, it provides reliable Gigabit networking for enterprise network switches, single-board computers, and embedded automation equipment.
- 10/100/1000BASE-T Gigabit Magnetics: Integrates an 8-core magnetic matrix across 4 differential pairs to support 1 Gbps Ethernet communications per IEEE 802.3ab standards.
- Metal Shielding With EMI Spring Tabs: External EMI spring tabs establish multi-point grounding contact with chassis panel cutouts to attenuate electromagnetic radiation.
- Integrated Green/Yellow Visual LEDs: Provides front-panel link speed and activity indication directly on the RJ45 jack faceplate.
- THT Side-Entry Assembly: 90-degree right-angle through-hole mounting with T-Post retaining pegs for mechanical strain relief during cable plugging cycles.
Key Design Benefits
- Integrated Chassis EMI Grounding: External EMI spring tabs ensure grounding continuity against the enclosure panel cutout, helping suppress radiated EMI.
- Integrated Status Diagnostics: Embedded Green and Yellow LEDs enable direct visual link and activity diagnostics without requiring separate board-mounted light pipes.
- 8-Core Gigabit Signal Architecture: Full 4-pair 1000BASE-T magnetics eliminate discrete PHY magnetics, saving PCB real estate and simplifying motherboard layout.
- Integrated Bob Smith Termination: Internal 75-ohm termination network controls common-mode EMI noise and signal reflections across Gigabit differential pairs.
- Supply Chain Continuity: Offers hardware engineering and procurement teams a standard 1x1 Gigabit THT footprint option for secondary sourcing.
Integrated Magnetics & Electrical Architecture
The LPJG0806EBNL integrates 10/100/1000BASE-T Gigabit magnetics directly behind the 10p8c contact pins, reducing the need for long differential trace runs to discrete magnetics on the motherboard.
8-Core Gigabit Transformer Matrix
The integrated magnetic assembly utilizes an 8-core topology across all 4 differential pairs with a 1CT:1CT turns ratio. This structure provides galvanic isolation between network cabling and the host Gigabit Ethernet PHY transceiver while filtering common-mode noise across Gigabit frequencies.
Bob Smith Termination (BST) Circuitry
An integrated Bob Smith Termination network connects the center taps of the isolation transformers to ground through high-voltage capacitors and precision 75-ohm resistors. This provides a defined common-mode termination path for the cable-side interface, helping control common-mode noise and EMI performance.
Mechanical Specifications & PCB Layout
The LPJG0806EBNL features standard package dimensions of 13.30mm (H) x 15.93mm (W) x 21.25mm (L) [0.524 x 0.627 x 0.837 in]. The right-angle side-entry profile aligns with standard board-edge connector layouts. Mechanical stability on FR4 substrates is reinforced by solderable T-Post PCB pegs, which absorb mechanical stress when Ethernet cables are attached.
Target Applications
- Enterprise Network Switches & Routers: Reliable 10/100/1000 Mbps Gigabit Ethernet connectivity with visual LED status for commercial networking hardware.
- Embedded Mainboards & Single-Board Computers: Compact Tab-Down Gigabit 1x1 ICM with EMI tabs for industrial SBCs and diagnostic controllers.
- Network Video Recorders & Security Gateways: High-throughput 1 Gbps Ethernet interface for multi-channel video recording equipment.
LINK-PP LPJG0806EBNL Design Verification Checklist
When evaluating the LINK-PP LPJG0806EBNL for new designs or secondary sourcing qualification, hardware engineers should verify the following parameters against their system specification:
- Magnetics Configuration: Confirm that your Gigabit Ethernet PHY reference design utilizes an 8-core (4-pair) 1CT:1CT magnetic architecture.
- Shield EMI Tab Requirement: Verify that your front-panel bezel cutout requires external EMI spring tabs for chassis grounding contact.
- Integrated LED Color Configuration: Verify that your system faceplate matches the Green/Yellow visual status LED arrangement.
- PCB Footprint & Peg Layout: Verify that the standard 10p8c THT pin grid and T-Post peg locations match your PCB land pattern.
Frequently Asked Questions
What are the primary mechanical and electrical specs of the LINK-PP LPJG0806EBNL?
The LPJG0806EBNL is a single-port (1x1) Tab-Down 10/100/1000BASE-T Gigabit RJ45 MagJack featuring an 8-core magnetic matrix (1CT:1CT), Green/Yellow LEDs, external EMI spring tabs, 10p8c THT side-entry mounting, and a commercial operating temperature rating of 0°C to +70°C.
What is the advantage of external shield EMI tabs on the LPJG0806EBNL?
The external EMI spring tabs establish multi-point electrical contact with the front-panel metal bezel cutout, providing a low-impedance ground path to reduce electromagnetic emissions and improve system-level EMC performance.
What engineering assets are available for LPJG0806EBNL PCB design-in?
LINK-PP provides complete design-in support assets, including 3D STEP models for mechanical enclosure clearance, 2D dimensional CAD drawings, PCB footprint land patterns for EDA software (Altium, Cadence, KiCad), and product specification sheets.
How can procurement and engineering teams request samples or a quotation for LINK-PP LPJG0806EBNL?
Procurement and engineering teams can contact LINK-PP to request LPJG0806EBNL evaluation samples for mechanical, electrical, and PCB compatibility verification. After qualification, our technical sales team can provide competitive pricing, production lead-time estimates, MOQ terms, and volume-order support.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































