HR915330A Compatible LPJG0806FBNL 100/1000 Base-T Shielded RJ45 Magjack Connector 1 Port Tab Down Green/Yellow Led
P/N:
LPJG0806FBNL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJG0806FBNL
- Number of Ports: 1X1
- Speed: 1000Base-T
- PoE: Non-PoE
- Latch: Down
- Mounting Type: SMT
- LED Option: Green / Yellow
- Shield EMI Tabs: NO
- Temperature: 0℃ to 70℃
- P/N: LPJG0806FBNL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: HR915330A
Packaging Details:
N.W/pCS:
0.008kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1200pcs
Carton size:
32*30*31cm
G.W/carton:
9kg
Product Specifications
| LINK-PP Part Number: | LPJG0806FBNL | Part Number | HR915330A |
| Part Status | Active | Connector Type | Jack |
| Number of Positions/Contacts | 10p8c (RJ45, Ethernet) | Application-Lan | Ethernet(NoN PoE) |
| Number of Ports | 1x1 Port | Speed | 10/100/1000 Base-T |
| Latch | Down | Cores per Port | 8 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | SIDE ENTRY |
| Shield EMI Tabs | Without | LED Option | Green/Yellow |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.528/13.40 | Package Length (Inches/mm) | 0.839/21.30 |
| Package Width (Inches/mm) | 0.626/15.90 | Temperature | 0℃ TO 70℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
HR915330A Compatible LINK-PP LPJG0806FBNL Gigabit RJ45 Magjack Technical Overview
The LINK-PP LPJG0806FBNL (engineered as a direct 100% pin-to-pin drop-in replacement for HanRun HR915330A) is a single-port (1x1) Tab-Down RJ45 Integrated Connector Module (ICM) with built-in Gigabit 100/1000 Base-T magnetics, Green/Yellow status LEDs, and a Bob Smith Termination (BST) circuit. Compliant with IEEE 802.3ab standards, it integrates an 8-core transformer/choke matrix (1CT:1CT turns ratio) across 4 differential pairs, delivering 1 Gbps full-duplex transmission, 1500Vrms isolation, ESD protection, and reliable thermal endurance for solar inverters, new energy systems, monitoring gateways, and embedded mainboards.
- Gigabit Ethernet Magnetics Architecture: 10p8c RJ45 connector integrated with an 8-core magnetic matrix (1CT:1CT turns ratio) supporting 1000BASE-T full-duplex communication over Cat5e/Cat6 wiring.
- Built-In Circuit Protection & Noise Rejection: Features an integrated Bob Smith Termination (BST) network and Auto-MDIX logic for enhanced common-mode EMI suppression and automatic cable crossover detection.
- Tab-Down Latch Geometry: Side-entry right-angle through-hole mounting with a Tab-Down mechanical latch and T-Post PCB retention pegs for stable board anchoring.
- Direct Cross-Reference Replacement: Fully qualified footprint and electrical drop-in replacement for HanRun HR915330A for BOM cost optimization and secondary sourcing.
LINK-PP LPJG0806FBNL Gigabit RJ45 Magjack Connector Overview
LINK-PP LPJG0806FBNL is a right-angle side-entry 1x1 Tab-Down RJ45 integrated connector module (ICM) designed for non-PoE Gigabit Ethernet platforms. Housing signal transformers, common-mode chokes, Green/Yellow visual status LEDs, and Bob Smith Termination directly inside a metal-shielded jack, this connector simplifies motherboard layout by replacing discrete PHY magnetics. It provides a highly reliable, pin-compatible secondary-source alternative for industry-standard HanRun HR915330A in solar inverters, battery energy storage systems (BESS), embedded mainboards, and industrial monitoring gateways.
Key Benefits of LINK-PP LPJG0806FBNL / HR915330A Compatible Magjack
- Full Gigabit 1000BASE-T Speed (IEEE 802.3ab): Embeds an 8-core transformer and common-mode choke matrix that isolates and filters 4 differential pairs, ensuring clean 1 Gbps eye diagrams with minimal differential insertion loss.
- Integrated Magjack Architecture (ICM): Consolidates discrete isolation transformers, common-mode chokes, resistors, and capacitors inside the RJ45 jack, reducing motherboard component count and SMT placement cycles.
- Integrated Bob Smith Termination (BST) & Auto-MDIX: Built-in 75-ohm BST circuit routes common-mode EMI noise and ESD transients safely to ground, while Auto-MDIX logic supports automatic straight-through or crossover cable detection.
- Tab-Down Latch & T-Post PCB Retention: Tab-Down mechanical latch orientation aligns with standard front-panel enclosures, while T-Post mechanical pegs anchor the jack against vibration and cable insertion strain.
- Customizable Gold Contact Plating: Available in Gold 6u", 15u", or 30u" plating thickness options to ensure low contact resistance and corrosion protection across 750+ mating cycles.
- Direct Second Sourcing for HR915330A: Identical 10p8c through-hole PCB land pattern and pinout allow seamless drop-in secondary sourcing to reduce procurement lead times.
Integrated Magnetics & 1000BASE-T Signal Architecture
The LINK-PP LPJG0806FBNL utilizes an advanced Gigabit Integrated Connector Module (ICM) architecture that embeds 10/100/1000 Base-T magnetics directly behind the RJ45 contact pins, eliminating high-frequency noise radiation caused by long trace runs on the motherboard.
8-Core Gigabit Transformer & Choke Configuration
Featuring a 1CT:1CT transmit and receive turns ratio with 8 magnetic cores per port, the LPJG0806FBNL establishes 1500Vrms galvanic isolation between the Ethernet PHY transceiver chip and the external network cable. The 8-core layout provides precise impedance matching across all 4 differential pairs required for Gigabit Ethernet, suppressing inter-pair crosstalk and common-mode noise.
Bob Smith Termination (BST) & ESD Rejection
The integrated Bob Smith Termination (BST) network utilizes high-voltage capacitors and precision resistors to balance line impedance on unused cable pairs. This prevents common-mode noise reflection, reduces radiated EMI emissions, and enhances system ESD immunity during cable plugging.
PCB Mounting & Mechanical Specifications
Designed for automated Through-Hole Technology (THT) assembly, the LPJG0806FBNL incorporates robust mechanical features to ensure structural integrity on FR4 substrates.
Tab-Down Latch Geometry & Package Dimensions
With package dimensions of 13.40mm H x 21.30mm L x 15.90mm W, the LPJG0806FBNL provides a compact footprint. Integrated Green/Yellow LEDs provide clear visual link status and data activity diagnostics, while T-Post mechanical pegs anchor the housing firmly to the motherboard during cable plugging.
Target Applications: Solar Inverters, New Energy, and Embedded Mainboards
Combining IEEE 802.3ab Gigabit speed, BST noise suppression, Tab-Down geometry, and HanRun HR915330A compatibility, the LINK-PP LPJG0806FBNL supports diverse embedded systems:
- Solar Inverters & Photovoltaic (PV) Gateways: Ideal for solar power inverter communications boards, solar data loggers, and PV grid monitoring gateways.
- New Energy Storage Systems (BESS): Deployed in battery energy storage controllers, EV charging stations, and smart energy management units.
- Embedded Mainboards & Industrial Controllers: Suitable for single-board computers (SBCs), embedded industrial mainboards, and monitoring systems.
How to Select and Verify LPJG0806FBNL vs. HR915330A
Hardware design engineers and procurement specialists evaluating the LINK-PP LPJG0806FBNL as a second-source replacement for HR915330A should verify the following core parameters:
- 8-Core Gigabit Magnetics Compatibility: Confirm that an 8-core magnetic matrix (4 differential pairs) and a 1CT:1CT turns ratio match your Gigabit Ethernet PHY transceiver reference design.
- Mechanical Latch & Footprint Alignment: Verify that the Tab-Down latch direction, 10p8c through-hole pin arrangement, and T-Post peg locations match the HR915330A PCB land pattern.
- LED Option & Driving Polarity: Confirm that the Green/Yellow LED configuration and pin polarity match your host SMT LED driving circuit.
- Package Height Clearance: Ensure that the 13.40mm package height fits within your front-panel bezel window.
Frequently Asked Questions
Is LINK-PP LPJG0806FBNL compatible with HR915330A?
Yes. LINK-PP LPJG0806FBNL is a direct functional, electrical, and footprint drop-in replacement for HanRun HR915330A, featuring the same 1x1 Tab-Down Gigabit 100/1000 Base-T Magjack layout and Green/Yellow LEDs.
Does LINK-PP LPJG0806FBNL support Gigabit Ethernet (1000BASE-T)?
Yes. LPJG0806FBNL is equipped with an 8-core magnetic matrix supporting 10/100/1000 Base-T full-duplex Gigabit Ethernet data rates compliant with IEEE 802.3ab standards.
What is the latch orientation and mounting style of LPJG0806FBNL?
LPJG0806FBNL features a Tab-Down mechanical latch orientation with 90-degree right-angle side-entry through-hole (THT) mounting and a T-Post mechanical PCB retaining peg.
What is the function of the integrated Bob Smith Termination (BST) circuit in LPJG0806FBNL?
The integrated Bob Smith Termination (BST) circuit utilizes built-in resistors and capacitors to balance line impedance on unused cable pairs, suppressing common-mode EMI noise and protecting the Ethernet PHY against ESD transients.
What contact gold plating options are available for LPJG0806FBNL?
LINK-PP offers LPJG0806FBNL with gold plating thickness options of Gold 6u", 15u", or 30u" in the contact mating area to meet different insertion durability and corrosion resistance specifications.
Is LPJG0806FBNL a Power over Ethernet (PoE) connector?
No. LPJG0806FBNL is a Non-PoE Gigabit RJ45 Magjack designed strictly for Ethernet signal transmission and isolation without DC power delivery.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































