HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LQ-LW100-ER4C1.jpg
  • LQ-LW100-ER4C.jpg
  • LQ-LW100-ER4C2.jpg
  • LQ-LW100-ER4C3.jpg
  • LQ-LW100-ER4C4.jpg

LQ-LW100-ER4C 100G ZR4 QSFP28 80km 1310nm SMF Optical Transceiver Module DOM Duplex LC

P/N:

LQ-LW100-ER4C

Manufacturer:

LINK-PP

Classification:

Compatible Brand:

LINK-PP

Compatible P/N:

LQ-LW100-ER4C

  • Compatible Brands: LINK-PP
  • Form Factor: QSFP28
  • Data Rate: 100G
  • Distance: ≤80km
  • Type: Single Mode
  • Connector: Duplex LC
  • Model: ZR4
  • Wavelength: 1310nm
  • P/N: LQ-LW100-ER4C
  • Manufacture: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LQ-LW100-ER4C

Product Specifications

LINK-PP Part Number LQ-LW100-ER4C Vendor Name LINK-PP
Form Factor QSFP28 Max Data Rate 100Gbps
Wavelength 1310nm Max Cable Distance 80km
Connector Duplex LC Media SMF
Transmitter Type EML Receiver Type APD
Power Consumption ≤3.3W Extinction Ratio >6dB
DDM/DOM Supported Case Temperature range 0°C to +70°C
TX Power 2~6.5dBm Minimum Receiver Power -28dBm
Powerbudget 31dB Receiver Overload 2dBm
CDR (Clock and Data Recovery) TX & RX Built-in CDR Modulation Format NRZ
Protocols QSFP28 MSA Compliant Warranty 5 Years

LINK-PP LQ-LW100-ER4C Technical Overview

The LINK-PP LQ-LW100-ER4C is a hot-pluggable 100Gbps QSFP28 optical transceiver module engineered for long-haul 100GBASE-ZR4 Ethernet transmission over single-mode fiber (SMF/G.652). Operating across four cooled 1310nm band LAN-WDM wavelengths, it supports extended transmission distances up to 80km over duplex LC single-mode fiber. Built with cooled EML laser transmitters (2 to 6.5 dBm TX power), a high-sensitivity APD (Avalanche Photodiode) receiver array (-28 dBm sensitivity) delivering a 31 dB optical power budget, integrated TX/RX Clock and Data Recovery (CDR) retimers, and a low power consumption of ≤3.3W, it provides high-capacity long-range optical transport for data center interconnects (DCI) and metro telecom backbones.

  • 100 Gbps Bandwidth & 80km Long-Reach Range: Delivers 100 Gbps throughput (4x 25.78 Gbps NRZ) over duplex LC single-mode fiber up to 80km without external optical amplifiers.
  • Cooled LAN-WDM EML & APD Receiver Subsystems: Combines 4-channel cooled EML lasers and high-gain APD photodetectors to achieve a 31 dB optical link budget.
  • Integrated TX & RX CDR Retimers: Dual Clock and Data Recovery (CDR) circuits on all four 25G channels re-time signals to maintain low jitter and bit error rates (BER).
  • Energy-Efficient Design (≤3.3W): Low power dissipation reduces thermal loading in high-density 100G switch chassis and top-of-rack line cards.

Key Design Benefits

  • 80km Standalone Optical Link Reach: Eliminates the need for external optical amplifiers (EDFA) or dispersion compensation modules on point-to-point links up to 80km.
  • Real-Time DOM Diagnostics: Internal digital diagnostics monitoring (DOM per SFF-8636) allows live monitoring of transmit/receive optical power, laser bias current, and module temperature.
  • Hot-Pluggable QSFP28 Form Factor: Enables module insertion and replacement in active switch or router line cards without interrupting host chassis power.
  • High Extinction Ratio (>6dB): Clean optical eye diagrams and high signal-to-noise ratio ensure reliable data transmission across long single-mode fiber spans.
  • Supply Chain Continuity: Offers network engineering and procurement teams a qualified 100G QSFP28 80km optical transceiver option for long-haul infrastructure expansion.

Optical Architecture & Diagnostic Performance

The LQ-LW100-ER4C incorporates advanced electro-optical subsystems directly within a metallic QSFP28 enclosure to ensure signal integrity across four high-speed LAN-WDM lanes.

Transmitter & Receiver Subsystems

The transmitter incorporates 4 cooled LAN-WDM EML lasers (1295.56nm, 1300.05nm, 1304.58nm, and 1309.14nm) multiplexed into a single optical output with 2 to 6.5 dBm launch power. The receiver uses an optical de-multiplexer coupled to an APD photodiode array providing -28 dBm minimum sensitivity and a 2 dBm overload threshold across 100Gbps data streams.

Digital Diagnostic Monitoring (DOM)

An SFF-8636 compliant MCU control unit monitors operational parameters over a 2-wire I2C interface, reporting real-time metrics including optical TX/RX power per lane, laser bias current, module operating temperature, and internal supply voltage.

Mechanical & Interface Specifications

The LQ-LW100-ER4C is enclosed in a standard metal QSFP28 housing with a pull-tab latching release mechanism for secure port locking and removal. The optical interface uses an industry-standard Duplex LC/UPC receptacle compatible with single-mode fiber (SMF G.652) patch cables. The module operates within a commercial temperature range of 0°C to 70°C and carries a 5-year warranty.

Target Applications

  • Data Center Interconnects (DCI): Point-to-point 80km 100G optical uplinks between hyperscale data centers and regional colocation facilities.
  • Metro & Regional Optical Transport: 100GBASE-ZR4 Ethernet transport across metropolitan area networks (MAN) and telecom aggregation rings.
  • Enterprise Campus & Core Backbones: High-capacity 100 Gbps core switch interconnects over long-distance single-mode fiber infrastructure.

LINK-PP LQ-LW100-ER4C Design Verification Checklist

When evaluating the LINK-PP LQ-LW100-ER4C for optical network expansion or secondary sourcing qualification, network engineers should verify the following parameters against their system specification:

  • 80km Fiber Link Budget Verification: Confirm that single-mode fiber (SMF G.652) cable attenuation stays within the 31 dB optical power budget.
  • Receiver Overload Attenuation Check: Ensure short-distance bench testing utilizes optical attenuators (minimum 10dB) to avoid exceeding the +2 dBm APD receiver damage threshold.
  • Switch QSFP28 Port Compatibility: Confirm that target switch or router line cards support 100G QSFP28 transceivers and SFF-8636 DOM protocols.
  • Thermal Class Verification: Confirm that the 0°C to 70°C commercial temperature rating matches your indoor data center server room environment.

Frequently Asked Questions

What are the primary optical specifications of the LINK-PP LQ-LW100-ER4C transceiver?

The LQ-LW100-ER4C is a 100Gbps QSFP28 optical transceiver operating across 4 LAN-WDM wavelengths (1310nm band) with an 80km reach over duplex LC single-mode fiber (SMF), featuring cooled EML transmitters (2 to 6.5 dBm), an APD receiver (-28 dBm sensitivity), a 31 dB link budget, TX/RX CDR, and power consumption ≤3.3W.

Do I need optical attenuators when testing the 80km LQ-LW100-ER4C transceiver in a lab environment?

Yes. Because the LQ-LW100-ER4C uses a high-sensitivity Avalanche Photodiode (APD) receiver with a +2 dBm overload threshold and high-power EML lasers, optical attenuators (typically 10dB to 15dB) must be used during short-distance lab testing to prevent damaging the APD photodiode.

What engineering and compliance documentation is available for LQ-LW100-ER4C design-in?

LINK-PP provides complete technical documentation, including product datasheets, EEPROM coding compatibility tables, mechanical 2D/3D drawings, RoHS compliance certificates, and Class 1 laser safety documentation.

How can procurement and engineering teams request samples or a quotation for LINK-PP LQ-LW100-ER4C?

Procurement and engineering teams can contact LINK-PP to request LQ-LW100-ER4C evaluation samples for optical, electrical, and switch compatibility verification. After qualification, our technical sales team can provide competitive pricing, production lead-time estimates, MOQ terms, and volume-order support.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

100G QSFP28 Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify LQ-LW100-ER4C compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

100G QSFP28 Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

SFP Download