LPJG0915HGNL 100/1000 Base-T Integrated RJ45 Connector With Magnetics Tab Down Yellow/Green LED
P/N:
LPJG0915HGNL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJG0915HGNL
- Compatible Brands: LINK-PP
- Number of Ports: 1X1
- Speed: 1000Base-T
- PoE: Non-PoE
- Latch: Down
- Mounting Type: THT
- LED Option: Yellow / Green
- Shield EMI Tabs: NO
- Temperature: 0℃ to 70℃
- P/N: LPJG0915HGNL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LPJG0915HGNL
Packaging Details:
N.W/pCS:
0.008kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1200pcs
Carton size:
32*30*31cm
G.W/carton:
9kg
Product Specifications
| LINK-PP Part Number | LPJG0915HGNL | Connector Type | Jack |
| Part Status | Active | Mounting Type | Through Hole |
| Number of Positions/Contacts | 10P8C (RJ45, Ethernet) | Application-LAN | Ethernet (Non-PoE) |
| Number of Ports | 1x1 Port | Speed | 10/100/1000BASE-T |
| Latch | Down | Cores per Port | 8 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | Side Entry |
| Shield EMI Tabs | Without | LED Option | Yellow / Green |
| PCB | FR4 | PCB Retaining Post | T-Post |
| Package Height (Inches/mm) | 0.524 / 13.30 | Package Length (Inches/mm) | 0.837 / 21.25 |
| Package Width (Inches/mm) | 0.627 / 15.93 | Temperature | 0°C to +70°C |
| BST Circuit | Yes | AutoMDX | Yes |
| Diodes | No | Contact Mating Area Plating | Gold 6µ" / 15µ" / 30µ" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T, C |
Single-Port Gigabit 10/100/1000BASE-T Integrated RJ45 MagJack for Embedded and Network Hardware
The LINK-PP LPJG0915HGNL is a single-port integrated RJ45 MagJack engineered for 10/100/1000BASE-T Gigabit Ethernet applications in non-PoE network architectures. Featuring a Tab-Down (bottom latch) orientation and an ultra-short package length of 21.25 mm (0.837 inches), it consolidates an 8P8C modular interface, 8-core isolation magnetics, Bob Smith termination, and Yellow/Green status LEDs inside a compact through-hole housing.
The connector features a 90° right-angle, side-entry profile with a smooth metal shield (without external EMI tabs), T-Post mechanical PCB retention, and a commercial operating temperature range of 0°C to +70°C. Its shortened body depth and bottom-latch geometry make it suited for space-constrained enclosures, industrial automation controllers, fieldbus gateways, digital cameras, network firewalls, and embedded single-board computers where board depth and upper panel clearances are primary design constraints.
Hardware designers should verify the mechanical drawing, pin assignment, PCB land pattern, and PHY manufacturer interface guidelines against product documentation before releasing PCB layouts for production.
Tab-Down Latch Geometry and Short-Depth Enclosure Integration
Mechanical layout constraints often dictate the required latch orientation and component depth of front-panel RJ45 jacks:
- Tab-Down Accessibility: In systems where the connector is positioned near the upper edge of an enclosure, under an overhang, or beneath an LCD display bezel, a standard Tab-Up latch can be difficult to reach. The Tab-Down (bottom latch) configuration places the plug release tab on the lower side, ensuring unobstructed cable disengagement.
- Compact 21.25 mm Package Length: Standard Gigabit MagJacks commonly feature package lengths ranging from 25.40 mm to 32.50 mm. The LPJG0915HGNL's compact 21.25 mm depth frees valuable PCB space directly behind the connector, facilitating shorter trace routing to PHY transceivers, decoupling capacitors, and power management circuits.
- Smooth Tabless Shield Exterior: The absence of external spring-finger tabs allows the connector to pass smoothly into tight-clearance panel openings without tab snagging or mechanical interference during enclosure assembly.
1000BASE-T Signal Transmission and Integrated 8-Core Magnetics
Gigabit Ethernet (1000BASE-T) transmits full-duplex differential signals across four twisted pairs simultaneously. The LPJG0915HGNL incorporates an internal 8-core magnetic structure with a 1CT:1CT turns ratio (T, C configuration), providing galvanic isolation and common-mode filtering across all active channels.
Because the connector is engineered specifically for non-PoE architectures, the internal magnetic layout is dedicated to differential data transmission without allocating space or thermal margins to high-current DC power paths. This contributes to the connector's compact 21.25 mm package length while maintaining physical-layer signal coupling.
Hardware designers should evaluate the MagJack in conjunction with the host Gigabit PHY transceiver, differential trace layout, ground plane design, and enclosure EMC strategy to ensure proper physical-layer performance.
Mechanical and PCB Design Considerations
Physical mounting orientation and board anchoring are key considerations when integrating short-body RJ45 jacks:
1. 10P8C Interface and PCB Termination
The 10P8C configuration features an 8-contact RJ45 mating face alongside 10 through-hole termination pins on the PCB side. The terminal pins accommodate differential data lines, common-mode termination references, and integrated LED connections.
Engineers should consult the official mechanical drawing to verify pin pitch, drill diameters, and trace clearance requirements before releasing board artwork.
2. Shield Construction Without External EMI Tabs
The LPJG0915HGNL is built with a smooth outer metal shield without external spring-finger tabs. Shield grounding continuity is maintained through the soldered through-hole shield pins connected directly to the PCB chassis/ground plane.
3. T-Post Mechanical Retention
A molded T-Post locating peg anchors the connector body securely to the FR4 PCB. It assists in absorbing lateral and axial forces during cable insertion and extraction, supporting solder-joint reliability under mechanical stress.
4. Status LED Indicators
The connector incorporates Yellow and Green LEDs for visual link and network activity indication. Current-limiting resistors and drive circuits must be implemented on the host PCB in accordance with PHY specifications and LED electrical ratings.
Architecture Comparison: Short-Body Tab-Down MagJack vs. Alternative Implementations
| Evaluation Metric | LPJG0915HGNL Short Tab-Down MagJack |
Standard 25.4 mm Tab-Up MagJack |
Discrete Gigabit Magnetics + Non-Magnetic Jack |
|---|---|---|---|
| Package Length (Depth) | Compact (21.25 mm / 0.837 in) | Standard (25.40 mm / 1.000 in) | Requires space for connector + discrete IC |
| Latch Orientation | Tab-Down (Bottom Latch) | Tab-Up (Top Latch) | Depends on selected connector |
| Shielding Style | Smooth shield (Without EMI tabs) | Typically with EMI tabs | Varies by connector selection |
| Magnetics Architecture | Integrated 8-Core Magnetics | Integrated 8-Core or 12-Core | Separate discrete magnetic module on PCB |
| PCB Component Count | Reduced — consolidates jack, magnetics, LEDs | Reduced | Higher — multiple discrete placements required |
| Primary Advantage | Compact depth & tabless fit for shallow I/O | Standard front-panel edge placement | Independent selection of transformer module |
Application Considerations for LPJG0915HGNL
| Target Application Profile | Potential Plating Option | Primary Engineering Consideration |
|---|---|---|
| Industrial Automation & Fieldbus Modules | Gold 15µ" / 30µ" | Compact 21.25 mm length fits shallow DIN-rail enclosures; Tab-Down latch eases maintenance access. |
| Digital Cameras & Vision Sensors | Gold 15µ" | Short body depth allows placement in compact optical and sensor housings with restricted rear clearance. |
| Network Firewalls & Security Routers | Gold 15µ" | High-speed Gigabit throughput, space-saving board footprint, integrated link/activity LEDs. |
| Embedded Single-Board Computers & Mainboards | Gold 6µ" / 15µ" | Consolidates physical-layer magnetics and termination into a small footprint, operating across 0°C to +70°C. |
Engineering Verification Checklist
Before releasing a PCB layout or finalizing a bill of materials (BOM) using the LPJG0915HGNL, hardware engineers should confirm the following design parameters against the official product drawing:
- Package Dimensions & Clearances: Verify the 13.30 mm height, 21.25 mm length, and 15.93 mm width against internal enclosure clearances.
- Pinout and Schematic Alignment: Verify the 10P8C terminal numbering, center-tap connections, and differential-pair assignments against the official product drawing and selected PHY reference design.
- Tab-Down Latch Clearance: Ensure adequate clearance below the front-panel cutout for RJ45 plug latch disengagement during maintenance.
- PCB Land Pattern: Check through-hole pad diameters, T-Post hole locations, and shield ground pin drill sizes on the manufacturer's footprint drawing.
- Smooth Shield Panel Cutout: Confirm that the enclosure opening accommodates the tabless shield without requiring spring-finger contact.
- LED Drive Circuitry: Implement suitable series current-limiting resistors and drive circuits on the host PCB matched to the selected PHY.
- Thermal Operating Environment: Validate that the component operating environment remains within the specified 0°C to +70°C range.
Frequently Asked Questions
What are the primary specifications of the LINK-PP LPJG0915HGNL?
The LPJG0915HGNL is a single-port integrated RJ45 MagJack supporting 10/100/1000BASE-T Gigabit Ethernet. It features an 8-core magnetic structure, Tab-Down latch, short 21.25 mm package length, 10P8C pinout, Yellow and Green LEDs, T-Post PCB retention, a smooth metal shield without EMI tabs, and an operating temperature range of 0°C to +70°C.
What is the mechanical advantage of the Tab-Down latch and 21.25 mm package length?
The Tab-Down latch places the release tab on the bottom of the connector, facilitating plug removal when mounted near the upper edge of an enclosure or under a display bezel. The compact 21.25 mm length reduces board depth requirements, freeing space behind the connector for host-board routing.
Why does the LPJG0915HGNL feature a shield without external EMI tabs?
The smooth tabless shield design allows the connector to pass through close-tolerance front-panel openings without snagging or deforming external spring fingers. Chassis grounding continuity is maintained through the soldered through-hole shield pins connected to the PCB ground plane.
Is the LPJG0915HGNL suitable for Power over Ethernet (PoE)?
No. The LPJG0915HGNL is specified as a Non-PoE connector for data-only Gigabit Ethernet interfaces. For systems requiring PoE or PoE+ power delivery, a MagJack with dedicated PoE-rated magnetics and DC current paths should be selected.
Does the LPJG0915HGNL support AutoMDX?
Yes. The product specification lists AutoMDX as supported. Engineers should verify the selected Ethernet PHY interface and reference design guidelines before finalizing production layouts.
What contact plating options are available for the LPJG0915HGNL?
The LPJG0915HGNL is available with 6 micro-inch, 15 micro-inch, or 30 micro-inch gold plating options at the contact mating area. Selection should be evaluated based on the expected mating cycles, operating environment, and application durability requirements.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































