HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LQ-CW40-LR4C-1.jpg
  • LQ-CW40-LR4C.jpg
  • LQ-CW40-LR4C-2.jpg
  • LQ-CW40-LR4C-3.jpg
  • LQ-CW40-LR4C-4.jpg

FS QSFP-LR4-40G SMF Optical Transceiver Module 40Gbps LR4 QSFP+ 1310nm 10km DOM Duplex LC

P/N:

LQ-CW40-LR4C

Manufacturer:

LINK-PP

Classification:

Compatible Brand:

FS

Compatible P/N:

QSFP-LR4-40G

  • Compatible Brands: FS
  • Form Factor: QSFP+
  • Data Rate: 40G
  • Distance: ≤10km
  • Type: Single Mode
  • Connector: Duplex LC
  • Model: LR4
  • Wavelength: 1310nm
  • P/N: LQ-CW40-LR4C
  • Manufacture: LINK-PP
  • Compatible Brand: FS
  • Compatible P/N: QSFP-LR4-40G

Product Specifications

LINK-PP Part Number LQ-CW40-LR4C FS Part Number QSFP-LR4-40G
Form Factor QSFP+ Max Data Rate 40Gbps
Wavelength 1310nm Max Cable Distance 10km
Connector Duplex LC Media SMF
Transmitter Type DFB CWDM Receiver Type PIN
Power Consumption ≤3.3W Protocols OTN OTU3, 40G Ethernet, Fiber Channel, SATA/SAS3, MSA Compliant
Host FEC Supported Case Temperature range 0°C to +70°C

FS QSFP-LR4-40G Compatible LINK-PP LQ-CW40-LR4C 40GBASE-LR4 QSFP+ Transceiver Technical Overview

The LINK-PP LQ-CW40-LR4C (engineered as a direct optical and EEPROM drop-in replacement for FS.com QSFP-LR4-40G) is a high-density 40GBASE-LR4 QSFP+ optical transceiver module delivering 40 Gbps aggregate throughput over 10 km on standard Single-Mode Fiber (SMF, G.652) via Duplex LC connectors. Utilizing a 4-channel CWDM DFB laser array (1271nm, 1291nm, 1311nm, 1331nm) with integrated optical MUX/DEMUX optics, a PIN photodiode receiver, and SFF-8436 Digital Optical Monitoring (DOM), it delivers an energy-efficient (≤3.3W) solution for data center spine-leaf backbones, enterprise core switches, and OTN OTU3 optical transport systems.

  • 4-Lane CWDM Wavelength Multiplexing: Multiplexes four 10.3125 Gbps optical lanes across the 1310nm CWDM grid (1271nm to 1331nm) onto a single duplex LC SMF fiber pair, replacing bulky 12-fiber MTP/MPO trunks.
  • Energy-Efficient ≤3.3W Thermal Design: Low power consumption profile protects switch port thermal density, reducing rack cooling overhead in dense 40G/100G data center switches.
  • Real-Time Digital Optical Monitoring (DOM): SFF-8436 compliant I2C telemetry interface tracking per-lane optical TX power, per-lane RX power, laser bias current, supply voltage, and internal operating temperature.
  • Multi-Vendor Compatibility & Standards Compliance: Fully compliant with IEEE 802.3ba 40GBASE-LR4, OTN OTU3 (C4S1-2D1), and SFF-8436 QSFP+ MSA specifications, fully pre-coded for FS.com and multi-vendor platforms.

LINK-PP LQ-CW40-LR4C 40GBASE-LR4 QSFP+ Optical Transceiver Overview

LINK-PP LQ-CW40-LR4C is a hot-pluggable 40Gbps QSFP+ optical transceiver module engineered for long-reach single-mode fiber interconnects up to 10 kilometers. Featuring four uncooled 10G CWDM DFB laser channels, an optical multiplexer/demultiplexer, Duplex LC optical interfaces, and full Digital Optical Monitoring (DOM) capabilities, this transceiver ensures clean optical eye diagrams and ultra-low bit error rates (BER < 10^-12). Pre-coded for seamless plug-and-play operation in FS.com compatible hardware, it serves as a fully qualified secondary-source replacement for FS QSFP-LR4-40G OEM transceivers.

Key Benefits of LINK-PP LQ-CW40-LR4C / FS QSFP-LR4-40G Compatible Transceiver

  • Full 40G Speed over Single Duplex LC Cable Pair: Eliminates the need for costly 12-fiber MTP/MPO ribbon cabling by multiplexing 4 optical lanes into a standard Duplex LC SMF connection, dramatically reducing fiber patch panel cabling costs.
  • Low Power Consumption (≤3.3W) for Dense Switches: Optimized optical and electrical driver architecture draws ≤3.3W under full load, minimizing heat dissipation in high-density 32-port 40G switch chassis.
  • SFF-8436 Compliant Per-Lane DOM Telemetry: Features real-time optical diagnostics providing granular lane-by-lane visibility into transmitter bias currents, optical input power, output power, and module temperature.
  • Multi-Protocol Support (40GbE, OTN OTU3, Fibre Channel): Supports data rates from 10.3125 Gbps per lane up to 11.18 Gbps aggregate OTU3 rate, catering to cloud data center networks, OTN transport, and storage backbones.
  • Seamless Secondary Sourcing for FS.com QSFP-LR4-40G: Pre-programmed EEPROM firmware guarantees instant recognition in FS.com, Cisco, Arista, Juniper, and Dell switches without throwing optical vendor alarms.

40GBASE-LR4 CWDM Optical Multiplexing & Link Architecture

The LINK-PP LQ-CW40-LR4C operates under the 40GBASE-LR4 protocol defined in IEEE 802.3ba and SFF-8436 QSFP+ MSA specifications, converting 4 electrical input channels of 10 Gbps into 4 CWDM optical signals.

1310nm CWDM Grid & Optical MUX/DEMUX Engine

The transmitter array utilizes four uncooled DFB lasers centered on the ITU-T G.694.2 CWDM grid: 1271nm, 1291nm, 1311nm, and 1331nm. These four optical signals are combined via an integrated optical multiplexer into a single SMF fiber. On the receive end, an optical demultiplexer separates the composite 40G signal into four discrete channels, directing them to a 4-channel PIN photodiode array with TIA preamplifiers. This optical budget provides 10 km transmission over standard G.652 SMF with ample link margin.

SFF-8436 Digital Optical Monitoring (DOM) Diagnostics

Using a 2-wire I2C serial interface mapped per SFF-8436, the module provides digital optical telemetry. Network operations teams can query real-time optical parameters per channel—including RX input power in dBm and TX bias currents—allowing proactive link budget monitoring and rapid fault isolation across long-distance fiber runs.

Switch Interoperability & Low Power Efficiency

High thermal density in 1RU/2RU 40G switches can cause optical degradation if module power draw is excessive. The LQ-CW40-LR4C addresses this through energy-efficient IC driver design.

≤3.3W Thermal Management & Plug-and-Play EEPROM

Operating at ≤3.3W per port, the LQ-CW40-LR4C operates cooler than unoptimized generic optics. Pre-programmed with accurate vendor EEPROM data maps, it passes host switch optics verification in FS.com, Cisco, Arista, and Juniper switches, ensuring error-free initialization without manual CLI overrides.

Target Applications: Data Center Spine-Leaf, Enterprise Core, and OTN

Combining 40Gbps aggregate bandwidth, 10km CWDM SMF reach, SFF-8436 DOM telemetry, and FS.com compatibility, the LINK-PP LQ-CW40-LR4C supports critical optical infrastructure:

  • Data Center Spine-Leaf & Core Switch Interconnects: Ideal for high-density 40GbE inter-rack spine-to-leaf connections and campus building-to-building backbones up to 10 km.
  • Enterprise Core Switch 40GbE Uplinks: Deployed in enterprise distribution and core routers requiring long-reach 40G uplinks over existing single-mode LC cabling.
  • OTN OTU3 Transport & Telecom Metro Networks: Suitable for OTN C4S1-2D1 optical transport networks, metro Ethernet aggregation, and service provider backhaul.

How to Select and Verify LQ-CW40-LR4C vs. FS QSFP-LR4-40G

Network engineers and procurement specialists evaluating the LINK-PP LQ-CW40-LR4C as a secondary-source replacement for FS QSFP-LR4-40G should verify the following core parameters:

  • Optical Cable & Connector Matching: Confirm that your installed optical fiber uses 9/125µm Single-Mode Fiber (SMF, G.652) with Duplex LC connectors, rather than 12-fiber MTP/MPO multi-mode cables used by 40GBASE-SR4 optics.
  • 10km Link Budget & Distance Verification: Ensure your fiber link distance does not exceed 10 kilometers (6.2 miles) and total optical loss remains within the 40GBASE-LR4 optical power budget.
  • Per-Lane DOM Telemetry Verification: Verify multi-channel optical power levels via switch CLI commands such as `show interfaces transceiver` to inspect individual CWDM channel TX/RX power levels.
  • Power Consumption Budget: Confirm that your host switch port power budget accommodates ≤3.3W per QSFP+ slot.

Frequently Asked Questions

Is LINK-PP LQ-CW40-LR4C compatible with FS.com QSFP-LR4-40G?

Yes. LINK-PP LQ-CW40-LR4C is a 100% optical, electrical, and EEPROM drop-in replacement for FS.com QSFP-LR4-40G, pre-programmed for seamless compatibility with FS.com, Cisco, Arista, and generic 40G switches.

What optical cable type and connector are required for LQ-CW40-LR4C?

The module operates over standard 9/125µm Single-Mode Fiber (SMF, G.652) using Duplex LC connectors, supporting maximum link distances up to 10 km (6.2 miles).

How does CWDM wavelength multiplexing work on 40GBASE-LR4?

40GBASE-LR4 multiplexes four 10.3125 Gbps optical signals over four distinct CWDM wavelengths (1271nm, 1291nm, 1311nm, 1331nm) into a single duplex LC fiber pair via integrated optical MUX/DEMUX components.

Does LINK-PP LQ-CW40-LR4C support Digital Optical Monitoring (DOM)?

Yes. The module features full DOM / DDM support per SFF-8436, providing real-time telemetry monitoring for TX power, RX power, bias current, supply voltage, and internal temperature across all four CWDM channels.

What is the maximum power consumption of LQ-CW40-LR4C?

The module features an energy-efficient power draw rated at ≤3.3W, ensuring cool operation and compatibility with dense high-port-count 40G switch chassis.

What protocols are supported by LQ-CW40-LR4C?

In addition to IEEE 802.3ba 40GBASE-LR4 Ethernet, the transceiver supports OTN OTU3 (C4S1-2D1), Fibre Channel, and SATA/SAS3 high-speed communication standards.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

40G QSFP+ Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify QSFP-LR4-40G compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

40G QSFP+ Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

SFP Download