LPJG16402AQNL 1000 Base-T RJ45 Yellow/Green&Orange 10P8c Modular Connector
P/N:
LPJG16402AQNL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJG16402AQNL
- Compatible Brands: LINK-PP
- Number of Ports: 1X1
- Speed: 1000Base-T
- PoE: Non-PoE
- Latch: Up
- Mounting Type: THT
- LED Option: Yellow / Green&Orange
- Shield EMI Tabs: YES
- Temperature: -40℃ to +85°C
- P/N: LPJG16402AQNL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LPJG16402AQNL
Packaging Details:
N.W/pCS:
0.007kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1200pcs
Carton size:
32*30*31cm
G.W/carton:
8.5kg
Product Specifications
| LINK-PP Part Number | LPJG16402AQNL | Connector Type | RJ45 MagJack (Integrated Magnetics) |
| Part Status | Active | Mounting Type | Through Hole (THT) |
| Number of Positions/Contacts | 10P8C (RJ45, Ethernet) | Application-LAN | Ethernet (Non-PoE) |
| Number of Ports | Single Port (1×1) | Speed | 10/100/1000BASE-T (Gigabit) |
| Latch Orientation | Up (Tab-Up) | Cores per Port | 8 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | Side Entry (Through Hole) |
| Shield EMI Tabs | With EMI Tabs | LED Option | Yellow / Green & Orange (Bi-Color) |
| PCB Material | FR4 | PCB Retaining Post | T-Post |
| Package Height (Inches/mm) | 0.530 / 13.45 | Package Length (Inches/mm) | 0.837 / 21.25 |
| Package Width (Inches/mm) | 0.628 / 15.95 | Operating Temperature | -40°C to +85°C (Industrial) |
| BST Circuit | Yes | AutoMDX | Yes |
| Diodes | No | Contact Mating Area Plating | Gold 6µ" / 15µ" / 30µ" |
| Turns Ratio (RX/TX) | 1CT:1CT | Configuration (RX/TX) | T, C |
Industrial 10/100/1000BASE-T RJ45 MagJack
The LINK-PP LPJG16402AQNL is an industrial-grade single-port 10/100/1000BASE-T Gigabit Ethernet RJ45 integrated connector module (MagJack) in a right-angle, side-entry through-hole configuration. Designed with an internal 8-core magnetic structure, 1CT:1CT turns ratio, integrated Bob Smith termination (BST), and AutoMDX support, the connector supports IEEE 802.3-compliant Ethernet signal isolation and common-mode noise suppression across the specified -40°C to +85°C operating temperature range.
The mechanical assembly incorporates a Tab-Up latch orientation, perimeter shield EMI tabs, Yellow and bi-color Green&Orange status LEDs, and molded T-Post retaining pins. With a housing height of 13.45 mm, the LPJG16402AQNL provides a standardized physical interface suited for industrial PCs (IPCs), embedded single-board computers (SBCs), edge IoT gateways, and commercial networking hardware.
Compatibility and Design Positioning
The LPJG16402AQNL can be evaluated as an alternative sourcing option for standard 10P8C single-port Gigabit Tab-Up RJ45 MagJack applications. It provides direct design relevance for hardware designs requiring through-hole mounting, an 8-core magnetic architecture with a 1CT:1CT turns ratio across all four differential pairs, integrated BST termination, and an industrial -40°C to +85°C temperature range. Engineering teams should cross-reference terminal pin assignments, T-Post hole locations, LED drive circuits, and mechanical clearances against the official LINK-PP technical drawing before production release.
Procurement and OEM Qualification
For sourcing teams and OEM engineering programs evaluating the LPJG16402AQNL as a second-source or BOM alternative, key qualification parameters include PCB mechanical footprint, pinout alignment, LED drive characteristics, electrical isolation parameters, operating temperature rating, and expected volume demand. LINK-PP can support sample evaluation, mechanical drawing review, and documentation requirements for prototype validation, AVL qualification, and volume production planning.
Tab-Up Latch Topology and Industrial Board-Edge Optimization
Integrating Gigabit magnetics into a standardized Tab-Up connector format provides practical packaging and mechanical advantages for embedded systems:
- Board-Edge Ergonomics: The Tab-Up latch positions the RJ45 plug release latch on the upper face, facilitating natural finger access from the top of the chassis without interference from the host PCB surface or bottom enclosure edges.
- -40°C to +85°C Industrial Operating Range: The -40°C to +85°C specification defines the stated operating temperature range of the connector assembly, supporting systems deployed in unconditioned industrial cabinets and outdoor housings.
- 13.45 mm Vertical Height: The specified housing height supports space-constrained board-edge and embedded hardware designs where enclosure clearance is limited.
- Perimeter Shield EMI Tabs: Exterior spring tabs establish multi-point contact with the equipment front panel, assisting with chassis-level grounding and shielding continuity.
- Mechanical T-Post Retention: Molded plastic posts help align the connector during assembly and distribute mechanical insertion and extraction stresses directly into the FR4 PCB substrate.
Internal Magnetics Architecture, 1CT:1CT Turns Ratio, and AutoMDX
The LPJG16402AQNL incorporates an internal 8-core magnetic architecture supporting the four differential pairs required for 10/100/1000BASE-T full-duplex Ethernet communication. A symmetrical 1CT:1CT turns ratio across transmit and receive stages in a T, C configuration enables broad interface compatibility with standard voltage-mode and current-mode Gigabit PHY transceivers.
The integrated circuit includes Bob Smith termination (BST) to help manage common-mode resonances and supports AutoMDX for automatic differential pair crossover detection. Electrical isolation complies with IEEE 802.3 specifications as defined in the product documentation, separating PHY circuitry from line-side transients and cable common-mode noise.
Mechanical Envelope and PCB Layout Considerations
When integrating the LPJG16402AQNL into host hardware layouts, engineering teams should account for the following structural and electrical parameters:
1. Package Dimensions and Front-Panel Cutout
The connector body measures 13.45 mm (0.530 inches) in height, 21.25 mm (0.837 inches) in length, and 15.95 mm (0.628 inches) in width. Front-panel openings must be designed with appropriate clearances to allow unhindered deflection of the perimeter EMI spring tabs.
2. Tab-Up Latch Headroom
Because the release latch is oriented on the top face, designers should provide adequate vertical clearance above the connector port to ensure field technicians can easily depress the plug latch during servicing.
3. Through-Hole T-Post Anchoring
Molded T-Posts position the component securely on the PCB. Verification of drill hole diameters and tolerance spacing against the official footprint drawing is essential to ensure proper mechanical seating and solder joint reliability.
4. Multi-State Status LED Circuitry
The connector features a Yellow indicator on one side and a bi-color Green&Orange LED on the other. Hardware engineers should implement suitable series current-limiting resistors matching the host PHY LED driver polarity and target forward current specifications.
Design Consideration Comparison: Integrated MagJack vs. Discrete Solution
| Design Consideration | LPJG16402AQNL Integrated Tab-Up MagJack |
Discrete Gigabit Magnetics + Modular RJ45 Jack |
|---|---|---|
| Component Integration | Magnetics and RJ45 connector integrated in one housing | Separate magnetic transformer and modular RJ45 jack |
| PCB Assembly Operations | Single through-hole placement | Multiple placements (SMD transformer + through-hole jack) |
| Board-Edge Layout | Consolidated footprint at board edge | Requires trace routing between discrete magnetics and connector |
| Vertical Height Envelope | Fixed 13.45 mm profile | Variable based on selected modular jack profile |
| Front-Panel Shielding | Integrated metal shield with perimeter EMI tabs | Dependent on chosen external RJ45 shield design |
| Primary Engineering Focus | Compact layout, unified assembly, standard Gigabit I/O | Custom physical placement flexibility across board zones |
Application Considerations for LPJG16402AQNL
| Target Application Profile | Primary Engineering Consideration |
|---|---|
| Industrial PCs (IPCs) & Embedded Computing | Supports Gigabit Ethernet operation across the specified -40°C to +85°C operating range on dense I/O edge layouts. |
| Edge IoT Gateways & Factory Automation | Standard Tab-Up latch aligns with front-panel cutouts; perimeter shield tabs support chassis grounding and EMI control. |
| Managed Network Switches & Routers | Integrated Bob Smith termination and 8-core magnetics streamline high-density multi-channel port layouts. |
| Test & Measurement Instrumentation | Yellow and bi-color Green&Orange LEDs provide versatile visual indication for link status, speed, and network activity. |
Engineering Verification Checklist
Before releasing a PCB layout or finalizing a bill of materials using the LPJG16402AQNL, hardware engineers should confirm the following design parameters against official documentation:
- Footprint and Pinout Verification: Verify 10P8C pinout, LED pin locations, and T-Post drill sizes against the official LINK-PP LPJG16402AQNL drawing.
- Tab-Up Headroom Clearance: Confirm that the enclosure cutout provides sufficient vertical clearance above the port for cable plug latch engagement and release.
- LED Drive Polarity and Resistors: Check the host PHY LED driver configuration (active-high, active-low, or bidirectional) and select appropriate series resistors for the Yellow and Green&Orange LEDs.
- Chassis Grounding Path: Verify that the PCB shield pins connect to a low-impedance chassis ground plane to support front-panel EMI tab performance.
- PHY Magnetics Compatibility: Confirm that the 1CT:1CT turns ratio and BST termination topology align with the transceiver manufacturer's reference schematic.
- Thermal Environment: Ensure that the operating environment inside the equipment chassis remains within the specified -40°C to +85°C industrial temperature range.
Frequently Asked Questions
What are the primary specifications of the LINK-PP LPJG16402AQNL?
The LPJG16402AQNL is an industrial-grade single-port 10/100/1000BASE-T Gigabit RJ45 MagJack. It features a 10P8C contact configuration, 8-core internal magnetics, 1CT:1CT turns ratio, Tab-Up latch orientation, side-entry through-hole mounting, Yellow and bi-color Green&Orange LEDs, integrated BST circuit, AutoMDX support, and an operating temperature range of -40°C to +85°C.
Can the LPJG16402AQNL be evaluated as an alternative sourcing option in existing designs?
Yes. The LPJG16402AQNL can be evaluated as a second-source or BOM alternative for industrial 10P8C 10/100/1000BASE-T Tab-Up RJ45 MagJacks. Engineering teams should cross-reference pinout mapping, LED forward drive requirements, T-Post hole locations, and mechanical clearances against the manufacturer's drawing before approving component substitution.
What is the significance of the -40°C to +85°C industrial temperature rating?
The -40°C to +85°C specification defines the verified operating temperature range for the LPJG16402AQNL assembly. This extended rating makes the component suitable for industrial embedded computers, automation controllers, and roadside enclosures subject to broad ambient temperature variations.
How does the Tab-Up latch orientation affect board-edge mechanical design?
A Tab-Up latch positions the RJ45 plug release latch on the upper face of the connector. This orientation is standard for motherboard and daughtercard designs where the PCB is mounted close to the enclosure floor, allowing users to press the latch from above without interference from the chassis lip.
How are the Yellow and Green&Orange LEDs driven on the host PCB?
The connector includes a Yellow indicator on one side and a bi-color Green&Orange LED on the other. The LED functions should be configured according to the host PHY reference design and the connector's electrical specifications. Depending on the selected LED control scheme, the indicators may be used for link speed, link status, or activity indication.
Is the LPJG16402AQNL suitable for Power over Ethernet (PoE) applications?
No. The LPJG16402AQNL is specified as a Non-PoE connector for data-only Gigabit Ethernet interfaces. For applications requiring PoE power delivery, a connector and magnetics solution specifically rated for the required PoE standard and DC current conditions should be selected.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































