HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJG17305-1AONL带弹梅花脚左白右黄带弹10p1.jpg
  • LPJG17305-1AONL带弹梅花脚左白右黄带弹10p4.jpg
  • LPJG17305-1AONL带弹梅花脚左白右黄带弹10p.jpg
  • LPJG17305-1AONL带弹梅花脚左白右黄带弹10p3.jpg
  • LPJG17305-1AONL带弹梅花脚左白右黄带弹10p2.jpg

RTA-164AAK1A Compatible LINK-PP LPJG17305-1AONL 100/1000 Base-T Tab Up Orange&Green/Yellow Led Single Port Ethernet Lan RJ45 Jack

P/N:

LPJG17305-1AONL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJG17305-1AONL

  • Number of Ports: 1X1
  • Speed: 1000Base-T
  • PoE: Non-PoE
  • Latch: Up
  • LED Option: Orange&Green / Yellow
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJG17305-1AONL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: RTA-164AAK1A

Packaging Details:

N.W/pCS:

0.008kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1200pcs

Carton size:

32*30*31cm

G.W/carton:

9kg

Product Specifications

LINK-PP Part Number LPJG17305-1AONL Other Part Number RTA-164AAK1A
Part Status Active Connector Type Jack
Number of Positions/Contacts 10p8c (RJ45, Ethernet) Application-Lan Ethernet( NoN PoE )
Number of Ports 1x1 Port Speed 10/100/1000 Base-T
Latch UP Cores per Port 12
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs With LED Option Orange&Green/Yellow Leds
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.531/13.50 Package Length (Inches/mm) 1.00/25.4
Package Width (Inches) 0.640/16.25 Temperature 0℃ TO 70℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

RTA-164AAK1A Compatible LINK-PP LPJG17305-1AONL 100/1000Base-T Gigabit RJ45 Jack

Engineered to deliver exceptional signal integrity and reliable physical connectivity in commercial networking devices, the LINK-PP LPJG17305-1AONL is a premium, single-port 100/1000Base-T (Gigabit Ethernet) RJ45 MagJack. Designed to consolidate the physical data interface and advanced 12-core magnetic isolation circuitry into a single shielded housing, this component streamlines printed circuit board (PCB) layouts and reduces overall component count. Operating securely within a standard commercial temperature envelope of 0°C to +70°C, it provides an exceptionally stable, non-PoE physical layer interface tailored for smart meters, high-definition digital cameras, and sensitive patient care monitors.

Manufactured under rigorous ISO9001 and ISO14001 quality management protocols, the LPJG17305-1AONL guarantees full compliance with IEEE 802.3, UL, REACH, and RoHS regulatory standards. This ensures that hardware architects are integrating a globally compliant, safe, and environmentally conscious component capable of sustaining dependable Gigabit data delivery.

RTA-164AAK1A Cross-Reference & BOM Optimization

Developed as an exact form-fit-function compatible replacement for the RTA-164AAK1A, the LPJG17305-1AONL empowers procurement teams and hardware engineers to secure their component supply chains and optimize their Bill of Materials (BOM). Delivering an identical PCB footprint, matched electrical impedance, and a precise 10P8C pin-out configuration, this cross-reference component acts as a seamless drop-in solution. This facilitates rapid integration into existing motherboard layouts, completely bypassing the costly engineering overhead and delays associated with board respins or recertification.

Mechanical Architecture & EMI Shielding

The mechanical envelope of the LPJG17305-1AONL is meticulously optimized for structural rigidity and superior electromagnetic compatibility (EMC) in compact electronic enclosures.

  • Port Configuration: Single-port 1x1, extended 10P8C RJ45 interface, Tab-Up orientation providing positive, tactile cable latching to prevent accidental disconnections in active environments.
  • Mounting Profile: 90-degree right-angle (side entry) utilizing highly durable Through-Hole Technology (THT) soldering. Reinforced with a dedicated T-post retaining structure designed to absorb the mechanical stress of frequent cable insertions and extractions.
  • EMI Containment: Enclosed in a heavy-duty metal shield equipped with active EMI grounding tabs. These tabs make direct electrical contact with the metallic chassis bezel, aggressively containing high-frequency electromagnetic interference (EMI) inherent to Gigabit transmission, while safely shunting electrostatic discharge (ESD) to ground.
  • Visual Diagnostics: Equipped with sophisticated Bi-color (Orange & Green) and Yellow LEDs, delivering immediate, localized visual feedback for Gigabit link speed and network activity directly at the faceplate.

Advanced 12-Core Gigabit Magnetics & Signal Integrity

Embedding the Ethernet isolation circuitry directly within the shielded RJ45 housing provides vital board-level benefits. The LPJG17305-1AONL stands out by utilizing a premium magnetic topology to ensure optimal signal integrity.

  • 12-Core Magnetic Topology: Unlike standard 8-core Gigabit jacks, the internal transformers and common-mode chokes in this connector utilize an advanced 12-core topology. This provides superior common-mode noise suppression, exceptional return loss margins, and enhanced signal fidelity across all four twisted pairs in electrically noisy environments.
  • Galvanic Isolation: Delivers standard-compliant high-voltage electrical isolation between the external twisted-pair network and the sensitive internal Gigabit PHY transceiver, guarding against destructive ground loops and voltage transients.
  • AutoMDIX Support: The internal 1CT:1CT transformer architecture fully supports AutoMDIX protocols, allowing the physical layer to automatically detect and correct straight-through or crossover cable configurations without manual intervention.

Hardware Layout & Routing Considerations

To extract maximum Gigabit performance from the LPJG17305-1AONL, PCB layout engineers must meticulously route the 100-ohm differential pairs between the Ethernet PHY and the RJ45 pins, keeping trace lengths perfectly matched to prevent phase skew. Verify that the chassis ground (tied to the connector’s EMI shield tabs) is physically isolated from the motherboard's digital ground plane to prevent capacitive noise coupling and safeguard the galvanic isolation barrier.

Typical Applications

Fusing robust EMI shielding with advanced 12-core Gigabit magnetic isolation, the LPJG17305-1AONL is the optimal interconnect solution for high-performance commercial and edge electronics:

  • Smart Energy & Utility: High-bandwidth smart meters, localized energy data loggers, and environmental monitoring gateways requiring stable data transmission.
  • Consumer & Commercial Electronics: High-end digital cameras, advanced interactive game controllers, and handheld diagnostic devices.
  • Medical & Health: Non-critical patient care monitoring devices and bedside telemetry units requiring safe electrical isolation.
  • Networking Infrastructure: Small Office/Home Office (SOHO) edge routers, network bridges, and multimedia set-top boxes.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.