LPJG17305-1ASNL 100/1000 Base-T Single Port Gigabit RJ45 Connector Magnetics Jack Tab Up Yellow/Orange&Green Led
P/N:
LPJG17305-1ASNL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJG17305-1ASNL
- Compatible Brands: LINK-PP
- Number of Ports: 1X1
- Speed: 1000Base-T
- PoE: Non-PoE
- Latch: Up
- LED Option: Yellow / Orange&Green
- Shield EMI Tabs: YES
- Temperature: 0℃ to 70℃
- P/N: LPJG17305-1ASNL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LPJG17305-1ASNL
Packaging Details:
N.W/pCS:
0.008kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1200pcs
Carton size:
32*30*31cm
G.W/carton:
9kg
Product Specifications
| LINK-PP Part Number | LPJG17305-1ASNL | Connector Type | Jack |
| Part Status | Active | Mounting Type | Through Hole |
| Number of Positions/Contacts | 10P8C (RJ45, Ethernet) | Application-LAN | Ethernet (Non-PoE) |
| Number of Ports | 1x1 Port | Speed | 10/100/1000BASE-T |
| Latch | Up | Cores per Port | 12 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | Side Entry |
| Shield EMI Tabs | With | LED Option | Yellow / Orange & Green |
| PCB | FR4 | PCB Retaining Post | T-Post |
| Package Height (Inches/mm) | 0.531 / 13.50 | Package Length (Inches/mm) | 1.000 / 25.40 |
| Package Width (Inches/mm) | 0.640 / 16.25 | Temperature | 0°C to +70°C |
| BST Circuit | Yes | AutoMDX | Yes |
| Diodes | No | Contact Mating Area Plating | Gold 6µ" / 15µ" / 30µ" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T, C |
Single-Port Gigabit 10/100/1000BASE-T Integrated RJ45 MagJack for Commercial and Embedded Networking
The LINK-PP LPJG17305-1ASNL is a single-port integrated RJ45 MagJack designed for standard 10/100/1000BASE-T Gigabit Ethernet applications in non-PoE system architectures. It integrates an 8P8C modular interface, 12-core isolation magnetics, Bob Smith termination, and status LEDs inside a compact shielded housing, streamlining physical-layer design on the host board.
The connector features a 90° right-angle, side-entry through-hole profile with a Tab-Up latch, T-Post mechanical PCB retention, EMI grounding tabs, and a commercial operating temperature range of 0°C to +70°C. Its standardized 13.50 mm height and compact 25.40 mm package depth suit space-constrained board edges where front-panel space, component clearance, and connector depth are primary mechanical constraints.
Hardware engineers should review the mechanical drawing, pinout configuration, PCB land pattern, and electrical characteristics against the host PHY guidelines before finalizing board layouts for production.
Gigabit Signal Transmission and 12-Core Magnetics Architecture
Gigabit Ethernet (1000BASE-T) operates over four differential twisted pairs simultaneously in full-duplex mode. Maintaining signal integrity across all four channels requires symmetrical magnetic coupling, effective common-mode noise suppression, and precise isolation between the PHY and the external cable plant.
The LPJG17305-1ASNL incorporates a 12-core magnetic design that integrates isolation transformers and common-mode filtering across the four differential lines. Because this connector is engineered specifically for non-PoE architectures, the internal magnetic layout is optimized for data transmission without allocating space or winding capacity to high-current DC power paths.
Hardware designers should evaluate the MagJack in conjunction with the host Gigabit PHY transceiver, differential trace routing, ground plane design, and enclosure EMC strategy to ensure proper physical-layer performance.
Mechanical and PCB Design Considerations
Physical mounting security and layout alignment are important factors when integrating through-hole RJ45 jacks into commercial and embedded hardware:
1. 10P8C Interface and PCB Termination
The 10P8C configuration provides a standard 8-contact RJ45 mating face for Ethernet patch cables alongside a 10-pin through-hole termination layout on the PCB side. The terminal pins accommodate the differential data lines, center taps, Bob Smith termination reference, and LED connections.
Engineers should consult the official mechanical drawing to verify pin pitch, drill diameters, and trace clearance requirements before releasing board artwork.
2. Tab-Up Latch Orientation and 25.40 mm Depth
The Tab-Up configuration positions the RJ45 plug latch release toward the top surface of the connector, allowing access when the jack is mounted near the lower edge of an enclosure. With a package length of 25.40 mm (1.000 inch), this connector provides a shorter board footprint than extended PoE-rated alternatives, aiding placement in depth-limited housings.
3. T-Post Mechanical Retention
A molded T-Post locating structure provides mechanical positioning and helps anchor the connector body to the PCB. This feature assists in absorbing mechanical insertion and extraction forces, reducing strain on the soldered electrical leads.
4. Shielding and Ground Tabs
The connector is enclosed in a metal shield equipped with EMI grounding tabs. These tabs establish conductive contact with the equipment front panel or chassis cutout, contributing to the system's overall shielding and grounding architecture.
System-level EMC performance depends on the complete design, including board grounding, chassis bonding, cable shielding, and differential layout symmetry. Connector-level shielding should be validated as part of the overall equipment compliance testing.
Integrated MagJack Architecture: Magnetics, BST, and LED Functions
The LPJG17305-1ASNL integrates several interface functions within a single component body:
- 12-Core Integrated Magnetics: Houses an internal 12-core magnetic structure with a 1CT:1CT turns ratio (T, C configuration) supporting 10/100/1000BASE-T physical layer transceivers.
- BST Termination: Integrates Bob Smith termination networks to provide common-mode line termination directly inside the connector body.
- Status LED Indicators: Features a Yellow LED on one side and an Orange & Green bi-color LED on the other for visual link and network activity indication. Host drive circuitry and current-limiting resistors must be implemented on the PCB according to PHY requirements.
- AutoMDX Support: Specified for AutoMDX-compatible Ethernet PHY implementations.
- Metal Shield: Provides an external metal shielding structure with integrated EMI tabs to support system-level grounding and shielding requirements.
Architecture Comparison: Gigabit Non-PoE MagJack vs. Alternative Implementations
| Evaluation Metric | LPJG17305-1ASNL Gigabit Non-PoE MagJack | Discrete Gigabit Magnetics + Non-Magnetic Jack | Gigabit PoE+ Integrated MagJack |
|---|---|---|---|
| Ethernet Speed | 10/100/1000BASE-T | Dependent on discrete transformer and PHY selection | 10/100/1000BASE-T |
| PoE Support | Non-PoE (Optimized for data-only links) | Depends on discrete transformer specification | Integrated PoE / PoE+ capability |
| Magnetics Architecture | 12-Core integrated magnetics | Separate discrete magnetic module on PCB | Typically 8-core or PoE-optimized magnetics |
| Package Depth | Compact (25.40 mm / 1.000 in) | Requires space for connector plus discrete IC | Often longer (up to 32.50 mm) to accommodate PoE isolation |
| PCB Component Count | Reduced — consolidates magnetics, BST, and LEDs | Higher — multiple discrete placements required | Reduced |
| Primary Application | Cost-effective commercial & embedded Gigabit I/O | Custom PHY matching or specialized isolation layouts | Powered network devices (PD/PSE) |
Application Considerations for LPJG17305-1ASNL
| Target Application Profile | Potential Plating Option | Primary Engineering Consideration |
|---|---|---|
| Smart Meters & Energy Data Concentrators | Gold 6µ" / 15µ" | Reliable Gigabit connectivity, compact 25.40 mm package depth, commercial operating temperature range. |
| Digital Cameras & Networked Imaging Units | Gold 15µ" | High-speed data transfer for image offloading in space-constrained embedded enclosures. |
| Embedded Systems & Single-Board Computers | Gold 6µ" / 15µ" | Reduced component count, simplified physical-layer layout, standard commercial 0°C to +70°C operation. |
| Commercial Networked Devices & Controllers | Gold 6µ" / 15µ" / 30µ" | Integrated status LEDs, T-Post mechanical PCB retention, and reliable Gigabit Ethernet interfacing. |
Frequently Asked Questions
What are the primary specifications of the LINK-PP LPJG17305-1ASNL?
The LPJG17305-1ASNL is a single-port integrated RJ45 MagJack supporting 10/100/1000BASE-T Gigabit Ethernet. It features a 12-core magnetic structure, 10P8C pinout, Tab-Up latch, right-angle side-entry through-hole mounting, integrated Bob Smith termination, status LEDs, and a commercial temperature rating of 0°C to +70°C.
Is the LPJG17305-1ASNL suitable for Power over Ethernet (PoE) applications?
No. The LPJG17305-1ASNL is specified as a Non-PoE connector designed for standard data-only Ethernet interfaces. For applications requiring PoE or PoE+ power delivery, a MagJack with dedicated PoE-rated magnetics and power-handling capability should be selected.
What is the significance of the 12-core magnetic design?
The 12-core magnetic structure provides isolation transformer and common-mode filtering functions across all four differential pairs used in 1000BASE-T Gigabit Ethernet communication, supporting physical-layer signal performance and common-mode noise suppression.
What does the 10P8C pin configuration mean?
The 10P8C configuration identifies an 8-contact RJ45 mating interface combined with 10 through-hole pins on the PCB side. These pins provide connections for the differential data lines, termination references, and integrated LED leads as detailed in the manufacturer's pinout drawing.
What LED configuration is included on the LPJG17305-1ASNL?
The connector is equipped with a Yellow LED on one side and an Orange & Green bi-color LED on the other. Current-limiting resistors and drive circuits must be implemented on the host PCB in accordance with the PHY specifications and LED electrical ratings.
What gold plating options are available for the LPJG17305-1ASNL?
The LPJG17305-1ASNL is available with 6 micro-inch, 15 micro-inch, or 30 micro-inch gold plating options at the contact mating area. Plating selection should be evaluated based on the expected mating cycles, operating environment, and application durability requirements.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































