HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJG17305-1ASNL不带弹梅花脚左黄右白带弹10p1.jpg
  • LPJG17305-1ASNL不带弹梅花脚左黄右白带弹10p.jpg
  • LPJG17305-1ASNL不带弹梅花脚左黄右白带弹10p3.jpg
  • LPJG17305-1ASNL不带弹梅花脚左黄右白带弹10p2.jpg
  • 带弹梅花脚左白右黄带弹10p3(1712048119897).jpg

RTA-175AAK1A Compatible LINK-PP LPJG17305-1ASNL 100/1000 Base-T Tab Up Yellow/Orange&Green Led Single Port Ethernet FastJacks RJ45

P/N:

LPJG17305-1ASNL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJG17305-1ASNL

  • Number of Ports: 1X1
  • Speed: 1000Base-T
  • PoE: Non-PoE
  • Latch: Up
  • LED Option: Yellow / Orange&Green
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJG17305-1ASNL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: RTA-175AAK1A

Packaging Details:

N.W/pCS:

0.008kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1200pcs

Carton size:

32*30*31cm

G.W/carton:

9kg

Product Specifications

LINK-PP Part Number LPJG17305-1ASNL Other Part Number RTA-175AAK1A
Part Status Active Connector Type Jack
Number of Positions/Contacts 10P8C (RJ45, Ethernet) Application-LAN Ethernet (Non-PoE)
Number of Ports 1x1 Port Speed 10/100/1000BASE-T
Latch Up Cores per Port 12
Orientation 90° Angle (Right) PCB Mount Angle Side Entry
Shield EMI Tabs With LED Option Yellow / Orange & Green
PCB FR4 PCB Retaining Post T-Post
Package Height (Inches/mm) 0.531 / 13.50 Package Length (Inches/mm) 1.000 / 25.40
Package Width (Inches/mm) 0.640 / 16.25 Temperature 0°C to +70°C
BST Circuit Yes AutoMDX Yes
Diodes No Contact Mating Area Plating Gold 6µ" / 15µ" / 30µ"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T, C

Single-Port Gigabit 10/100/1000BASE-T Integrated RJ45 MagJack for Commercial and Embedded Networking

The LINK-PP LPJG17305-1ASNL is a single-port integrated RJ45 MagJack designed for standard 10/100/1000BASE-T Gigabit Ethernet applications in non-PoE system configurations. It consolidates the 8P8C modular interface, 12-core isolation magnetics, Bob Smith termination, and status LEDs inside a shielded connector assembly, helping reduce discrete component count and PCB routing complexity around the Ethernet PHY.

The connector features a 90° right-angle, side-entry through-hole profile with a Tab-Up latch, T-Post mechanical PCB retention, EMI grounding tabs, and a commercial operating temperature range of 0°C to +70°C. Its standardized 13.50 mm height and compact 25.40 mm package depth suit space-constrained board edges where front-panel space, connector depth, and component clearance are primary mechanical constraints.

The LPJG17305-1ASNL is designed as a compatible alternative to the RTA-175AAK1A. Hardware engineers should verify the mechanical drawing, pin assignment, PCB footprint, and electrical parameters against system requirements before finalizing board layouts for production.

Ethernet Interface: 10/100/1000BASE-T Gigabit
Reference Part: RTA-175AAK1A
Power Architecture: Non-PoE Design
Magnetics Architecture: 12-Core Integrated Design
Operating Temperature: 0°C to +70°C Commercial
Mechanical Configuration: 1x1, Right-Angle, Tab-Up

Gigabit Signal Transmission and 12-Core Magnetics Architecture

Gigabit Ethernet (1000BASE-T) transmits full-duplex data simultaneously across four differential twisted pairs. Maintaining signal integrity across all four channels requires symmetrical magnetic coupling, effective common-mode noise filtering, and galvanic isolation between the PHY transceiver and the external cabling.

The LPJG17305-1ASNL incorporates a 12-core magnetic structure that integrates isolation transformers and common-mode chokes across all differential lines. Because this connector is engineered specifically for non-PoE architectures, the internal magnetic layout is dedicated to data transmission and signal isolation without the added thermal or winding constraints associated with high-current DC power injection.

Hardware designers should evaluate the MagJack in conjunction with the host Gigabit PHY transceiver, differential trace layout, ground plane design, and enclosure EMC strategy to ensure reliable physical-layer performance.

Mechanical and PCB Design Considerations

Physical mounting security and layout alignment are critical factors when integrating through-hole RJ45 jacks into commercial and embedded systems:

1. 10P8C Interface and PCB Termination

The 10P8C configuration features a standard 8-contact RJ45 mating face for Ethernet patch cables alongside a 10-pin through-hole footprint on the PCB side. The additional PCB terminals accommodate the integrated magnetic center taps, Bob Smith termination reference, and LED connections.

Because pinout assignments can vary across manufacturers, designers should compare the complete pinout and mechanical drawing against the board layout before treating alternative parts as direct drop-in replacements.

2. Tab-Up Latch Orientation and 25.40 mm Depth

The Tab-Up configuration positions the RJ45 plug latch release toward the upper side of the connector, facilitating latch access when mounted along the lower edge of an enclosure. With a package length of 25.40 mm (1.000 inch), this connector provides a shorter depth than extended PoE-rated alternatives, aiding placement in depth-limited housings.

3. T-Post Mechanical Retention

A molded T-Post locating structure provides mechanical positioning and helps anchor the connector body to the PCB. It assists in distributing lateral and axial forces during cable insertion and extraction, supporting solder-joint reliability under mechanical stress.

4. Shielding Structure and Chassis Integration

The connector is enclosed in a metal shield equipped with EMI grounding tabs. These tabs provide a conductive contact interface to the front panel or enclosure cutout, supporting the system-level shielding and grounding design.

Overall EMC performance depends on the complete implementation, including PCB grounding, chassis bonding, cable shielding, and differential layout symmetry. Connector-level shielding should be validated as part of system-level EMC testing.

Integrated MagJack Architecture: Magnetics, BST, and LED Functions

An integrated MagJack consolidates several physical-layer interface functions into a single housing:

  • 12-Core Integrated Magnetics: Houses an internal 12-core magnetic structure with a 1CT:1CT turns ratio (T, C configuration) specified for 10/100/1000BASE-T physical-layer implementations.
  • BST Termination: Integrates Bob Smith termination networks to provide common-mode line termination directly inside the connector body.
  • Port Status LEDs: Features a Yellow LED on one side and an Orange & Green bi-color LED on the other for visual link and network activity indication. Host drive circuitry and current-limiting resistors must be placed on the PCB according to PHY requirements.
  • AutoMDX Support: Specified for AutoMDX-compatible Ethernet PHY implementations.
  • Metal Shield: Provides an external metal shielding structure with integrated EMI tabs to support the equipment's grounding and shielding design.

Architecture Comparison: Gigabit Non-PoE MagJack vs. Alternative Implementations

Evaluation Metric LPJG17305-1ASNL Gigabit Non-PoE MagJack Discrete Gigabit Magnetics + Non-Magnetic Jack Gigabit PoE+ Integrated MagJack
Ethernet Speed 10/100/1000BASE-T Dependent on discrete transformer and PHY selection 10/100/1000BASE-T
PoE Support Non-PoE (Dedicated data-only architecture) Depends on discrete transformer specification Integrated PoE / PoE+ capability
Magnetics Architecture 12-Core integrated magnetics Separate discrete magnetic module on PCB Typically 8-core or PoE-optimized magnetics
Package Depth Compact (25.40 mm / 1.000 in) Requires space for connector plus discrete IC Often longer (up to 32.50 mm) to accommodate PoE isolation
PCB Component Count Reduced — consolidates magnetics, BST, and LEDs Higher — multiple discrete placements required Reduced
Primary Advantage Cost-effective commercial & embedded Gigabit I/O Maximum freedom for custom PHY layout or isolation Powered network devices (PD/PSE)

Application Considerations for LPJG17305-1ASNL

Target Application Profile Potential Plating Option Primary Engineering Consideration
Smart Meters & Energy Data Concentrators Gold 6µ" / 15µ" Reliable Gigabit connectivity, compact 25.40 mm package depth, commercial operating temperature range.
Digital Cameras & Networked Imaging Units Gold 15µ" High-speed data transfer for image offloading in space-constrained embedded enclosures.
Handheld Devices & Portable Instrumentation Gold 6µ" / 15µ" Reduced component count, compact board footprint, standard 0°C to +70°C commercial operation.
Commercial Networked Controllers & Game Hardware Gold 6µ" / 15µ" / 30µ" Integrated status LEDs, T-Post mechanical PCB retention, and reliable Gigabit Ethernet interfacing.

Frequently Asked Questions

Is the LINK-PP LPJG17305-1ASNL a compatible alternative to the RTA-175AAK1A?

The LPJG17305-1ASNL is designed as a compatible alternative to the RTA-175AAK1A with a single-port Gigabit MagJack configuration, 10P8C pinout, Tab-Up latch, right-angle side-entry mounting, integrated 12-core magnetics, and status LEDs. Engineers should verify the mechanical drawing, pin assignment, PCB footprint, and electrical parameters before production use.

Is the LPJG17305-1ASNL suitable for Power over Ethernet (PoE) applications?

No. The LPJG17305-1ASNL is specified as a Non-PoE connector designed for standard data-only Gigabit Ethernet interfaces. For systems requiring PoE or PoE+ power delivery, an RJ45 MagJack with dedicated PoE-rated magnetics and DC current paths should be selected.

What is the significance of the 12-core magnetic design?

The 12-core magnetic structure provides isolation transformer and common-mode filtering functions across all four differential pairs used in 1000BASE-T Gigabit Ethernet communication, supporting physical-layer signal performance and common-mode noise suppression.

What does the 10P8C pin configuration mean?

The 10P8C configuration identifies an 8-contact RJ45 mating interface combined with 10 through-hole pins on the PCB side. These pins provide connections for the differential data lines, termination references, and integrated LED leads as detailed in the manufacturer's pinout drawing.

What LED configuration is integrated into the LPJG17305-1ASNL?

The connector is equipped with a Yellow LED on one side and an Orange & Green bi-color LED on the other. Current-limiting resistors and drive circuits must be implemented on the host PCB in accordance with PHY specifications and LED electrical ratings.

What gold plating options are available for the LPJG17305-1ASNL?

The LPJG17305-1ASNL is available with 6 micro-inch, 15 micro-inch, or 30 micro-inch gold plating options at the contact mating area. Plating selection should be evaluated based on the expected mating cycles, operating environment, and application durability requirements.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.