HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • AR11-4179I.jpg
  • rj45(1712029956766).jpg
  • AR11-4179I Abracon.jpg
  • 7499111446.jpg
  • 7499111446 WE.jpg

WE 7499111446 Compatible LINK-PP LPJG4820G4NL 100/1000 Base-T Tab Down G&Y/G&Y Led 1 Port Cat6 RJ45 Keystone Jack

P/N:

LPJG4820G4NL

Manufacturer:

LINK-PP

Compatible Brand:

WE

Compatible P/N:

LPJG4820G4NL

  • Compatible Brands: Wurth
  • Number of Ports: 1X1
  • Speed: 1000Base-T
  • PoE: Non-PoE
  • Latch: Down
  • LED Option: Green&Yellow / Green&Yellow
  • Shield EMI Tabs: YES
  • Temperature: -40℃ to +85°C
  • P/N: LPJG4820G4NL
  • Manufacturer: LINK-PP
  • Compatible Brand: WE
  • Compatible P/N: 7499111446

Packaging Details:

N.W/pCS:

0.008kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1200pcs

Carton size:

32*30*31cm

G.W/carton:

9kg

Product Specifications

LINK-PP Part Number LPJG4820G4NL WE Part Number 7499111446
Part Status Active Connector Type Jack
Number of Positions/Contacts 10P8C (RJ45, Ethernet) Application-LAN Ethernet (Non-PoE)
Number of Ports 1x1 Port Speed 10/100/1000BASE-T
Latch Down Cores per Port 8
Orientation 90° Angle (Right) PCB Mount Angle Side Entry
Shield EMI Tabs With LED Option Green & Yellow / Green & Yellow
PCB FR4 PCB Retaining Post T-Post
Package Height (Inches/mm) 0.524 / 13.30 Package Length (Inches/mm) 0.837 / 21.25
Package Width (Inches/mm) 0.627 / 15.93 Temperature -40°C to +85°C
BST Circuit Yes AutoMDX Yes
Diodes No Contact Mating Area Plating Gold 6µ" / 15µ" / 30µ"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T, C

WE 7499111446 Compatible Single-Port Industrial Gigabit 10/100/1000BASE-T Integrated RJ45 MagJack

The LINK-PP LPJG4820G4NL is a single-port integrated RJ45 MagJack engineered for 10/100/1000BASE-T Gigabit Ethernet applications in harsh, wide-temperature non-PoE network designs. Featuring a Tab-Down (bottom latch) orientation, an ultra-short 21.25 mm (0.837 inches) package length, and an extended operating temperature range of -40°C to +85°C, it consolidates an 8P8C modular interface, 8-core isolation magnetics, Bob Smith termination, and dual bi-color status LEDs inside a shielded through-hole housing.

The connector features a 90° right-angle, side-entry profile with perimeter EMI grounding tabs, T-Post mechanical PCB retention, and dual Green & Yellow bi-color LEDs. It is positioned as a compatible alternative to the WE 7499111446 for VoIP gateways, smart home controllers, media players, handheld instrumentation, and embedded networking hardware where board depth, thermal resilience, and upper panel clearances are primary design constraints.

Hardware designers should verify the mechanical drawing, pin assignment, PCB land pattern, and PHY manufacturer interface guidelines against product documentation before releasing PCB layouts for production.

Ethernet Speed: 10/100/1000BASE-T Gigabit
Reference Part: WE 7499111446
Operating Temperature: -40°C to +85°C Industrial
Latch Orientation: Tab-Down (Bottom Latch)
Package Depth: Compact 21.25 mm Length
LED Option: Dual Bi-Color Green & Yellow

WE 7499111446 Compatible Design Positioning

The LPJG4820G4NL is positioned as a compatible alternative to the WE 7499111446 for 10/100/1000BASE-T Gigabit Ethernet applications, providing hardware engineering and procurement teams with a potential second-source option for designs requiring comparable package and interface characteristics.

To ensure proper integration on existing or new motherboard designs, engineering teams should cross-reference the mechanical drawing, pin assignment, solder pad geometry, and electrical characteristics against original design requirements prior to volume release.

Industrial Operating Temperature (-40°C to +85°C) and Magnetic Stability

Deploying networking hardware across varied commercial and industrial environments requires magnetic components that maintain consistent electrical performance across wide thermal excursions:

  • Thermal Range Stability: The LPJG4820G4NL is specified for operation from -40°C to +85°C. Magnetic core materials and winding insulation are structured to maintain open-circuit inductance (OCL) and baseline wander compensation across both sub-zero and elevated ambient temperatures.
  • Non-PoE Data Architecture: By dedicating the internal magnetics solely to high-speed differential signal transmission, the connector avoids additional thermal buildup associated with high DC power injection, supporting stable operation near the upper +85°C limit.
  • Signal Coupling Integrity: Symmetrical 1CT:1CT transformer coupling (T, C configuration) ensures balanced transmission and common-mode filtering across all four Gigabit differential pairs.

Tab-Down Latch Geometry and Short-Depth Enclosure Integration

Mechanical layout constraints often dictate the required latch orientation and component depth of front-panel RJ45 jacks:

  • Tab-Down Accessibility: In systems where the connector is positioned near the upper edge of an enclosure, under an overhang, or beneath an LCD display bezel, a standard Tab-Up latch can be difficult to reach. The Tab-Down (bottom latch) configuration places the plug release tab on the lower side, ensuring unobstructed cable disengagement.
  • Compact 21.25 mm Package Length: Standard Gigabit MagJacks commonly feature package lengths ranging from 25.40 mm to 32.50 mm. The LPJG4820G4NL's compact 21.25 mm depth frees valuable PCB space directly behind the connector, facilitating shorter trace routing to PHY transceivers, decoupling capacitors, and power management circuits.
  • Metal Shielding with EMI Tabs: Spring-finger grounding tabs around the perimeter of the metal shell establish multi-point contact with the equipment front panel or bezel cutout, supporting the system-level shielding and grounding architecture.

Mechanical and PCB Design Considerations

Physical mounting orientation and board anchoring are key considerations when integrating short-body RJ45 jacks:

1. 10P8C Interface and PCB Termination

The 10P8C configuration features an 8-contact RJ45 mating face alongside 10 through-hole termination pins on the PCB side. The terminal pins accommodate differential data lines, common-mode termination references, and dual bi-color LED connections.

Engineers should consult the official mechanical drawing to verify pin pitch, drill diameters, and trace clearance requirements before releasing board artwork.

2. T-Post Mechanical Retention

A molded T-Post locating peg anchors the connector body securely to the FR4 PCB. It assists in absorbing lateral and axial forces during cable insertion and extraction, supporting solder-joint reliability under mechanical stress.

3. Dual Bi-Color Status LEDs

The connector incorporates Green & Yellow bi-color LEDs on both the left and right port positions. This enables flexible multi-state visual indication (such as link speed, activity, or fault status). Current-limiting resistors and drive circuits must be implemented on the host PCB in accordance with PHY specifications and LED electrical ratings.

Architecture Comparison: Industrial Short-Body MagJack vs. Alternative Implementations

Evaluation Metric LPJG4820G4NL
Industrial Tab-Down MagJack
Standard Commercial
Tab-Up MagJack
Discrete Gigabit Magnetics
+ Non-Magnetic Jack
Operating Temperature -40°C to +85°C (Industrial) 0°C to +70°C (Commercial) Depends on discrete transformer rating
Package Length (Depth) Compact (21.25 mm / 0.837 in) Standard (25.40 mm / 1.000 in) Requires space for connector + discrete IC
Latch Orientation Tab-Down (Bottom Latch) Tab-Up (Top Latch) Depends on selected connector
LED Indication Dual Bi-Color (Green & Yellow x2) Single color or single bi-color Separate LEDs on board
Shielding Style Metal shield with EMI tabs Typically with EMI tabs Varies by connector selection
Primary Advantage Wide thermal range & compact depth for industrial I/O Standard commercial applications Independent layout of transformer module

Application Considerations for LPJG4820G4NL

Target Application Profile Potential Plating Option Primary Engineering Consideration
VoIP Gateways & Communication Platforms Gold 15µ" / 30µ" -40°C to +85°C operating range, compact 21.25 mm length, and dual bi-color status LEDs for diagnostics.
Smart Home Controllers & IoT Gateways Gold 6µ" / 15µ" Reliable Gigabit connectivity, space-saving board footprint, and perimeter EMI shielding tabs.
Hard Disk Players & Set-Top Boxes Gold 6µ" / 15µ" High-speed Gigabit streaming throughput; short body depth facilitates low-profile consumer housing layouts.
Handheld Devices & Test Instrumentation Gold 15µ" / 30µ" T-Post PCB anchoring against shock/vibration; Tab-Down latch eases maintenance access.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials (BOM) using the LPJG4820G4NL, hardware engineers should confirm the following design parameters against the official product drawing:

  • Package Dimensions & Clearances: Verify the 13.30 mm height, 21.25 mm length, and 15.93 mm width against internal enclosure clearances.
  • Pinout and Schematic Alignment: Verify the 10P8C terminal numbering, center-tap connections, and differential-pair assignments against the official product drawing and selected PHY reference design.
  • Tab-Down Latch Clearance: Ensure adequate clearance below the front-panel cutout for RJ45 plug latch disengagement during maintenance.
  • PCB Land Pattern: Check through-hole pad diameters, T-Post hole locations, and shield ground pin drill sizes on the manufacturer's footprint drawing.
  • Dual Bi-Color LED Drive Circuitry: Implement suitable series current-limiting resistors and drive circuits on the host PCB matched to both bi-color LED channels.
  • Thermal Operating Environment: Confirm the operating environment remains within the specified -40°C to +85°C industrial temperature range.

Frequently Asked Questions

Is the LINK-PP LPJG4820G4NL a compatible alternative to the WE 7499111446?

The LPJG4820G4NL is designed as a compatible alternative to the WE 7499111446 with a single-port Gigabit MagJack configuration, Tab-Down latch, short 21.25 mm package length, 10P8C pinout, dual bi-color Green & Yellow LEDs, T-Post PCB retention, metal shield with EMI tabs, and an industrial operating temperature range of -40°C to +85°C. Engineers should verify the mechanical drawing, pin assignments, and PCB land pattern before production use.

What is the significance of the -40°C to +85°C operating temperature rating?

The -40°C to +85°C rating indicates that the internal magnetics, winding insulation, and housing materials are designed to maintain required electrical isolation and signal coupling across industrial temperature extremes, making the connector suitable for outdoor smart gateways, commercial hardware, and factory automation deployments.

What is the mechanical advantage of the Tab-Down latch and 21.25 mm package length?

The Tab-Down latch places the release tab on the bottom of the connector, facilitating plug removal when mounted near the upper edge of an enclosure or under a display bezel. The compact 21.25 mm length reduces board depth requirements, freeing space behind the connector for host-board routing.

How do the dual bi-color LEDs operate on the LPJG4820G4NL?

The connector features Green & Yellow bi-color LEDs on both the left and right positions, allowing multi-state port status indication (such as speed, link activity, or system diagnostics). The host PCB must provide suitable current-limiting resistors and drive circuitry matched to the selected Ethernet PHY.

Is the LPJG4820G4NL suitable for Power over Ethernet (PoE) applications?

No. The LPJG4820G4NL is specified as a Non-PoE connector for data-only Gigabit Ethernet interfaces. For systems requiring PoE or PoE+ power delivery, a MagJack with dedicated PoE-rated magnetics and DC current paths should be selected.

Does the LPJG4820G4NL support AutoMDX?

Yes. The product specification lists AutoMDX as supported. Engineers should verify the selected Ethernet PHY interface and reference design guidelines before finalizing production layouts.

What contact plating options are available for the LPJG4820G4NL?

The LPJG4820G4NL is available with 6 micro-inch, 15 micro-inch, or 30 micro-inch gold plating options at the contact mating area. Selection should be evaluated based on the expected mating cycles, operating environment, and application durability requirements.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.