Molex 85789-1006 Compatible LINK-PP LPJK2070AHNL 100/1000 Base-T Tab Up Green/Yellow Led 1x1 Port POE+ RJ45 Modular Socket
P/N:
LPJK2070AHNL
Manufacturer:
LINK-PP
Compatible Brand:
Molex
Compatible P/N:
LPJK2070AHNL
- Compatible Brands: Molex
- Number of Ports: 1X1
- Speed: 1000Base-T
- PoE: PoE+
- Latch: Up
- LED Option: Green / Yellow
- Shield EMI Tabs: YES
- Temperature: 0℃ to 70℃
- P/N: LPJK2070AHNL
- Manufacturer: LINK-PP
- Compatible Brand: Molex
- Compatible P/N: 85789-1006
Packaging Details:
N.W/pCS:
0.011kg
Package:
Tray
SPQ:
60pcs
Qty/carton:
840pcs
Carton size:
37*30*30cm
G.W/carton:
9kg
Product Specifications
| LINK-PP Part Number: | LPJK2070AHNL | Molex Part Number | 85789-1006 |
| Part Status | Active | Connector Type | Jack |
| Number of Positions/Contacts | 12p8c (RJ45, Ethernet) | Application-Lan | Ethernet( PoE+ ) |
| Number of Ports | 1x1 Port | Speed | 10/100/1000 Base-T |
| Latch | UP | Cores per Port | 8 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | SIDE ENTRY |
| Shield EMI Tabs | With | LED Option | Green/Yellow Leds |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.531/13.50 | Package Length (Inches/mm) | 1.28/32.50 |
| Package Width (Inches) | 0.654/16.60 | Temperature | 0℃ TO 70℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
Molex 85789-1006 Compatible LINK-PP LPJK2070AHNL Gigabit PoE+ RJ45 Magjack Technical Overview
The LINK-PP LPJK2070AHNL (engineered as a direct 100% pin-to-pin drop-in replacement for Molex 85789-1006) is a single-port (1x1) Tab-Up female RJ45 Integrated Connector Module (ICM) with built-in IEEE 802.3at PoE+ (30W) Gigabit 1000Base-T magnetics, Green/Yellow status LEDs, and a Bob Smith Termination (BST) circuit. Featuring an 8-core magnetic matrix (1CT:1CT turns ratio) calibrated to withstand 600mA DC current bias per pair, it delivers 1 Gbps full-duplex data transmission, 30W Power over Ethernet Plus delivery, 1500Vrms isolation, and 360-degree panel grounding for IP media players, game controllers, new energy gateways, and Ethernet control units.
- IEEE 802.3at PoE+ (30W) Power Delivery: Engineered to carry up to 30W DC supply current alongside 1000BASE-T Gigabit data over Cat5e/Cat6 wiring without magnetic core saturation or signal degradation.
- Gigabit Ethernet Magnetics Architecture: 12p8c RJ45 connector integrated with an 8-core magnetic matrix (1CT:1CT turns ratio) supporting 10/100/1000 Base-T full-duplex communication over 4 differential pairs.
- Extended 32.50mm Package Length Footprint: Designed with a 32.50mm (1.28 in) extended package length to match legacy Molex 85789 series mounting dimensions, ensuring exact mechanical pin alignment on existing PCB layouts.
- Direct Cross-Reference Replacement: Fully qualified footprint and electrical drop-in replacement for Molex 85789-1006 for BOM cost optimization and secondary sourcing.
LINK-PP LPJK2070AHNL Gigabit PoE+ RJ45 Magjack Connector Overview
LINK-PP LPJK2070AHNL is a right-angle side-entry 1x1 Tab-Up female RJ45 integrated connector module (ICM) designed for PoE+ (IEEE 802.3at 30W) Gigabit Ethernet networking platforms. Housing signal transformers, common-mode chokes, Green/Yellow visual status LEDs, and Bob Smith Termination directly inside a metal-shielded jack with EMI spring tabs, this connector simplifies motherboard layout by replacing discrete PHY magnetics and external power injectors. It provides a highly reliable, pin-compatible secondary-source alternative to Molex 85789-1006 in HD IP media players, interactive game controllers, EV charging gateways, and industrial Ethernet automation.
Key Benefits of LINK-PP LPJK2070AHNL / Molex 85789-1006 Compatible Magjack
- IEEE 802.3at Power over Ethernet Plus (PoE+ 30W) Capability: Delivers up to 30W of DC power to connected Powered Devices (PDs) such as PTZ IP cameras and digital signage players, eliminating external AC power adapters.
- Full Gigabit 1000BASE-T Speed (IEEE 802.3ab): Embeds an 8-core transformer and common-mode choke matrix that isolates and filters 4 differential pairs, ensuring clean 1 Gbps eye diagrams under continuous DC bias current.
- 32.50mm Package Length Matches Legacy Molex Footprints: Designed with an extended 32.50mm package depth to match Molex 85789-1006 mounting dimensions, guaranteeing exact mechanical alignment on existing PCB land patterns.
- Integrated Bob Smith Termination (BST) & Auto-MDIX: Built-in 75-ohm BST circuit routes common-mode EMI noise and ESD transients safely to ground, while Auto-MDIX logic supports automatic straight-through or crossover cable detection.
- EMI Shield Tabs for Enhanced Panel Grounding: Outfitted with external EMI spring tabs on the metal shield frame that press tightly against chassis front panel cutouts, forming a low-impedance grounding loop to suppress radiated emissions.
- Customizable Gold Contact Plating: Available in Gold 6u", 15u", or 30u" plating thickness options to ensure low contact resistance and corrosion protection across 750+ mating cycles.
PoE+ IEEE 802.3at Magnetics & 1000BASE-T Signal Architecture
The LINK-PP LPJK2070AHNL utilizes an advanced Gigabit PoE+ Integrated Connector Module (ICM) architecture that embeds 1000BASE-T magnetics and DC power injection paths directly behind the 12p8c contact pins, eliminating high-frequency noise radiation caused by long trace runs on the motherboard.
8-Core Gigabit PoE+ Transformer Configuration
Featuring a 1CT:1CT transmit and receive turns ratio with 8 magnetic cores per port, the LPJK2070AHNL establishes 1500Vrms galvanic isolation between the Ethernet PHY transceiver chip and the external network cable. The internal transformer windings are specially wound with heavy-gauge wire to handle up to 600mA DC current per pair (30W total) without magnetic core saturation, maintaining low insertion loss and high return loss across 1000BASE-T frequencies.
Bob Smith Termination (BST) & ESD Rejection
The integrated Bob Smith Termination (BST) network utilizes high-voltage capacitors and precision resistors to balance line impedance on unused cable pairs. This prevents common-mode noise reflection, reduces radiated EMI emissions, and enhances system ESD immunity during cable plugging.
PCB Mounting & Mechanical Specifications
Designed for automated Through-Hole Technology (THT) assembly on FR4 substrates, the LPJK2070AHNL incorporates robust mechanical features for industrial environments.
32.50mm Package Length & EMI Shield Tabs
With package dimensions of 13.50mm H x 32.50mm L x 16.60mm W, the LPJK2070AHNL provides a 12p8c footprint tailored for specific chassis cutouts. Integrated Green/Yellow LEDs provide clear visual link status and data activity diagnostics, while T-Post mechanical pegs anchor the housing firmly to the motherboard during cable plugging.
Target Applications: IP Media Players, Game Controllers, and New Energy Gateways
Combining IEEE 802.3at PoE+ 30W power delivery, 1000BASE-T Gigabit speed, BST noise suppression, EMI shield tabs, and Molex 85789-1006 compatibility, the LINK-PP LPJK2070AHNL supports diverse embedded systems:
- High-Definition IP Media Players & Digital Signage: Ideal for PoE+ powered digital signage displays, media players, and streaming video gateways.
- Interactive Game Controllers & Arcade Terminals: Deployed in commercial gaming consoles, interactive kiosks, and arcade controllers requiring high-speed Ethernet and power delivery.
- New Energy Systems & EV Charging Gateways: Suitable for electric vehicle (EV) charging station controllers, solar power data loggers, and smart grid communication gateways.
How to Select and Verify LPJK2070AHNL vs. Molex 85789-1006
Hardware design engineers and procurement specialists evaluating the LINK-PP LPJK2070AHNL as a second-source replacement for Molex 85789-1006 should verify the following core parameters:
- IEEE 802.3at PoE+ (30W) Power Budget: Confirm that a 30W PoE+ power budget and 8-core 1000BASE-T magnetics layout match your Powered Device (PD) power supply schematic.
- 32.50mm Package Length & 12p8c Footprint Alignment: Confirm that the 12p8c through-hole pin arrangement, 32.50mm package depth, and T-Post peg locations match the Molex 85789-1006 PCB land pattern.
- Mechanical Latch & LED Driving Polarity: Verify that the Tab-Up latch direction and Green/Yellow LED driving polarity match your front-panel bezel window and LED driver circuit.
- Package Height Clearance: Ensure that the 13.50mm package height fits within your front-panel bezel window.
Frequently Asked Questions
Is LINK-PP LPJK2070AHNL compatible with Molex 85789-1006?
Yes. LINK-PP LPJK2070AHNL is a direct functional, electrical, and footprint drop-in replacement for Molex 85789-1006, featuring the same 1x1 Tab-Up 1000BASE-T Gigabit PoE+ (30W) Magjack layout, 32.50mm package length, and Green/Yellow LEDs.
What is the PoE rating supported by LINK-PP LPJK2070AHNL?
LPJK2070AHNL is fully compliant with IEEE 802.3at Power over Ethernet Plus (PoE+) standards, supporting DC power delivery up to 30W (600mA/pair) alongside 1 Gbps Gigabit Ethernet data.
What data rate is supported by LPJK2070AHNL?
LPJK2070AHNL is equipped with an 8-core magnetic matrix supporting 10/100/1000 Base-T full-duplex Gigabit Ethernet data rates compliant with IEEE 802.3ab standards.
What is the purpose of the 12p8c pin layout on LPJK2070AHNL?
The 12p8c through-hole layout accommodates 8 pins for 4-pair 1000BASE-T Gigabit Ethernet data transmission, 2 dedicated pins for PoE+ DC power injection, and 2 pins for the integrated Green/Yellow status LEDs.
What is the function of the integrated Bob Smith Termination (BST) circuit in LPJK2070AHNL?
The integrated Bob Smith Termination (BST) circuit utilizes built-in resistors and capacitors to balance line impedance on unused cable pairs, suppressing common-mode EMI noise and protecting the Ethernet PHY against ESD transients.
Does LINK-PP LPJK2070AHNL include EMI shielding tabs?
Yes. LPJK2070AHNL is equipped with external EMI shield spring tabs on the metal housing that press against chassis panel bezel cutouts to establish a low-impedance ground loop and minimize RF radiation.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































