HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJG27037A4NL双白灯.jpg
  • LPJG27037A4NL双白灯1.jpg
  • 双白灯(1711684434596).jpg
  • LPJG27037A4NL双白灯5.jpg
  • LPJG27037A4NL3双白灯.jpg

Belfuse 0879-2C2R-DA Compatible LINK-PP LPJG27037A4NL 10/100/1000 Base-T 8p8c Green&Yellow/Green&Yellow LED 2x2 Port Cat6 Modular Jack

P/N:

Manufacturer:

LINK-PP

Compatible Brand:

Belfuse

Compatible P/N:

  • Compatible Brands: Belfuse
  • Number of Ports: 2X2
  • Speed: 10Base-T,100Base-TX,1000Base-T
  • PoE: Non-PoE
  • LED Option: Green&Yellow / Green&Yellow
  • Shield EMI Tabs: YES
  • Temperature: -40℃ to +85°C
  • Manufacturer: LINK-PP
  • Compatible Brand: Belfuse
  • Compatible P/N: 0879-2C2R-DA

Packaging Details:

N.W/pCS:

0.034kg

Package:

Tray

SPQ:

18pcs

Qty/carton:

324pcs

Carton size:

37*30*30cm

G.W/carton:

11kg

Product Specifications

LINK-PP Part Number LPJG27037A4NL Belfuse Part Number 0879-2C2R-DA
Part Status Active Connector Type Jack
Number of Positions/Contacts 8P8C (RJ45, Ethernet) Application-LAN Ethernet (Non-PoE)
Number of Ports 2x2 Port Speed 10/100/1000BASE-T
Latch Both Cores per Port 8
Orientation 90° Angle (Right) PCB Mount Angle Side Entry
Shield EMI Tabs With LED Option Green & Yellow / Green & Yellow
PCB FR4 PCB Retaining Post T-Post
Package Height (Inches/mm) 1.015 / 25.79 Package Length (Inches/mm) 1.118 / 28.40
Package Width (Inches/mm) 1.230 / 31.24 Temperature -40°C to +85°C
BST Circuit Yes AutoMDX Yes
Diodes No Contact Mating Area Plating Gold 6µ" / 15µ" / 30µ"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T, C

Belfuse 0879-2C2R-DA Compatible Stacked 2x2 Port Industrial Gigabit 10/100/1000BASE-T Integrated RJ45 MagJack

The LINK-PP LPJG27037A4NL is a stacked 2x2 multi-port integrated RJ45 MagJack engineered for high-density 10/100/1000BASE-T Gigabit Ethernet applications in wide-temperature non-PoE network architectures. By arranging four 8P8C ports into a 2-over-2 matrix within a 31.24 mm horizontal board-edge width, it delivers high I/O density while operating reliably across an extended industrial temperature range of -40°C to +85°C.

The connector features a 90° right-angle, side-entry through-hole profile with dual latching (Tab-Up on upper ports, Tab-Down on lower ports), integrated 8-core magnetics per port, Bob Smith termination, dual Green & Yellow bi-color LEDs for all four ports, T-Post mechanical PCB retention, and a metal shield with EMI tabs. It is positioned as a compatible alternative to the Belfuse 0879-2C2R-DA for multi-port network interface cards (NICs), optical network terminals (ONT), surveillance webcams, hard disk players, and embedded computing systems.

Hardware designers should verify the mechanical drawing, pin assignment, PCB land pattern, and PHY manufacturer interface guidelines against product documentation before releasing PCB layouts for production.

Ethernet Speed: 10/100/1000BASE-T Gigabit
Reference Part: Belfuse 0879-2C2R-DA
Port Layout: Stacked 2x2 (4 Ports Total)
Operating Temperature: -40°C to +85°C Industrial
Latching: Dual Latch (Both)
LED Option: Dual Bi-Color Green & Yellow

Belfuse 0879-2C2R-DA Compatible Design Positioning

The LPJG27037A4NL is positioned as a compatible alternative to the Belfuse 0879-2C2R-DA for 10/100/1000BASE-T Gigabit Ethernet applications, providing hardware engineering and procurement teams with a potential second-source option for designs requiring comparable package, footprint, and interface characteristics.

To ensure proper integration on existing or new motherboard designs, engineering teams should cross-reference the mechanical drawing, pin assignment, solder pad geometry, and electrical characteristics against original design requirements prior to volume release.

Stacked 2x2 Density and Industrial Thermal Envelope (-40°C to +85°C)

High-density multi-port hardware deployed across commercial and industrial environments requires connector assemblies that combine space efficiency with thermal resilience:

  • 50% Horizontal Board-Edge Savings: A conventional 1x4 horizontal ganged connector requires approximately 63.75 mm of board-edge width, whereas the stacked 2x2 LPJG27037A4NL occupies only 31.24 mm. This frees critical front-panel perimeter space for optical cages, power inputs, or auxiliary I/O.
  • -40°C to +85°C Operating Stability: Specified for industrial temperature ranges, the internal magnetic core materials and winding insulation maintain open-circuit inductance (OCL) and signal isolation across harsh sub-zero and elevated temperature conditions.
  • Non-PoE Data Architecture: By dedicating the magnetics solely to high-speed differential data transmission, the connector avoids localized internal heating from high DC power injection, supporting stable operation near the upper +85°C thermal limit.

Integrated 8-Core Magnetics per Port and AutoMDX Support

Each of the four ports incorporates an internal 8-core magnetic structure with a symmetrical 1CT:1CT turns ratio (T, C configuration). This integrates isolation transformers and common-mode filtering directly into the connector housing, eliminating large discrete magnetic modules on the motherboard.

The connector includes integrated Bob Smith termination (BST) networks for line-side common-mode termination and is specified for AutoMDX-compatible Gigabit PHY implementations. Hardware designers should evaluate the MagJack in conjunction with the host PHY transceivers, controlled-impedance differential PCB trace routing, ground plane design, and enclosure EMC strategy to ensure proper physical-layer performance.

Mechanical Design and Stacked Stress Distribution

Stacked 2x2 connectors introduce specific mechanical and interface considerations due to their vertical height and multi-cable layout:

1. 2x2 Package Envelope

The connector body measures 25.79 mm (1.015 inches) in height, 28.40 mm (1.118 inches) in length, and 31.24 mm (1.230 inches) in width. Mechanical designers must verify vertical clearance within enclosure envelopes including motherboard standoff heights.

2. Dual Latch Configuration (Latch: Both)

To ensure easy cable release in stacked configurations, the connector utilizes an opposing latch orientation: the upper two ports feature Tab-Up latches, while the lower two ports feature Tab-Down latches. This allows users to access the release tabs of both upper and lower patch cables without mechanical interference.

3. T-Post Mechanical Retention

Molded T-Post retention posts anchor the 25.79 mm tall connector housing into the FR4 PCB. These locating posts help absorb cumulative axial and shear forces generated when multiple network cables are inserted, extracted, or flexed, protecting through-hole solder terminals from mechanical fatigue.

4. Shielding and Chassis Grounding Tabs

The connector is wrapped in a metal shield equipped with top and side EMI grounding tabs. These tabs establish multi-point contact with the equipment front panel, supporting the system-level shielding and grounding architecture.

5. Dual Bi-Color Status LEDs

Each port is equipped with Green & Yellow bi-color LEDs on both the left and right positions, enabling multi-state visual indication (such as link speed, activity, or port diagnostics). Current-limiting resistors and drive circuits must be implemented on the host PCB in accordance with PHY specifications.

Architecture Comparison: Industrial Stacked 2x2 MagJack vs. Alternative Implementations

Evaluation Metric LPJG27037A4NL
Industrial Stacked 2x2 MagJack
Commercial Stacked 2x2
MagJack (0°C to +70°C)
1x4 Horizontal
Ganged MagJack
Operating Temperature -40°C to +85°C (Industrial) 0°C to +70°C (Commercial) Model-dependent
Horizontal Board-Edge Width Compact (~31.24 mm) — 50% width reduction Compact (~31.24 mm) Wide (~63.75 mm) — consumes extensive board edge
LED Indication Dual Bi-Color (Green & Yellow per port) Without LEDs or single color Single color or bi-color
Magnetics Integration Integrated 8 cores per port (32 cores total) Integrated 8 cores per port Integrated 8 cores per port
Latch Architecture Dual Latch (Tab-Up top / Tab-Down bottom) Dual Latch (Both) Single-direction (Typically Tab-Up)
Primary Advantage High port density with wide thermal range & dual LEDs Standard commercial environments Low-profile blade systems

Application Considerations for LPJG27037A4NL

Target Application Profile Potential Plating Option Primary Engineering Consideration
Multi-Port Network Interface Cards (NICs) Gold 15µ" / 30µ" Fits four Gigabit Ethernet ports within a standard-height PCIe bracket envelope.
Optical Network Terminals (ONT/ONU) & Gateways Gold 15µ" Saves front-panel space for optical transceivers; provides reliable 1000BASE-T local switching.
High-Density Webcams & Surveillance Systems Gold 15µ" / 30µ" -40°C to +85°C thermal stability, compact 31.24 mm width, and dual bi-color diagnostic LEDs.
Hard Disk Media Players & Storage Appliances Gold 6µ" / 15µ" High-speed Gigabit throughput, space-saving board footprint, perimeter EMI shielding tabs for panel bonding.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials (BOM) using the LPJG27037A4NL, hardware engineers should confirm the following design parameters against the official product drawing:

  • Package Dimensions & Vertical Clearance: Verify the 25.79 mm height, 31.24 mm width, and 28.40 mm length against enclosure height and front-panel cutout dimensions.
  • PCB Land Pattern: Check through-hole pad diameters, T-Post hole locations, and shield grounding pin drill sizes on the manufacturer's footprint drawing.
  • Dual Latch Clearances: Ensure adequate clearance above and below the connector faceplate cutout for both upper (Tab-Up) and lower (Tab-Down) plug latch disengagement.
  • Dual Bi-Color LED Drive Circuitry: Implement suitable series current-limiting resistors and drive circuits on the host PCB matched to the bi-color LED channels for all four ports.
  • PHY Interface & Differential Routing: Verify four-port 1000BASE-T differential pair routing, trace length matching, and AutoMDX compatibility with the selected PHY transceivers.
  • Thermal Operating Environment: Confirm that the operating environment remains within the specified -40°C to +85°C industrial temperature range.

Frequently Asked Questions

Is the LINK-PP LPJG27037A4NL a compatible alternative to the Belfuse 0879-2C2R-DA?

The LPJG27037A4NL is designed as a compatible alternative to the Belfuse 0879-2C2R-DA with a stacked 2x2 (4-port) Gigabit MagJack configuration, dual latching (Both), dual bi-color Green & Yellow LEDs, 90° right-angle through-hole mounting, T-Post PCB retention, EMI shielding tabs, and an industrial operating temperature range of -40°C to +85°C. Engineers should verify the mechanical drawing, pin assignments, and PCB land pattern before production use.

What is the mechanical benefit of a stacked 2x2 connector over a horizontal 1x4 configuration?

A stacked 2x2 connector arranges four ports in a 2-over-2 matrix occupying 31.24 mm of horizontal board width, compared to approximately 63.75 mm for a 1x4 horizontal ganged jack. This provides roughly 50% horizontal board-edge space savings, enabling higher port density on faceplates, optical terminals, and PCIe expansion cards.

What does the "Both" latch specification indicate?

The "Both" latch specification indicates that the connector uses dual-direction latching: the top row of ports features Tab-Up latches, while the bottom row features Tab-Down latches. This orientation ensures that cable release tabs can be accessed independently without interfering with adjacent plugs.

What is the significance of the -40°C to +85°C operating temperature rating?

The -40°C to +85°C rating indicates that the internal magnetics, winding insulation, and housing materials maintain required electrical isolation, baseline wander compensation, and signal coupling across industrial temperature extremes, making the connector suitable for harsh factory automation, optical terminals, and outdoor hardware deployments.

How do the dual bi-color LEDs operate on this 2x2 MagJack?

Each of the four ports features Green & Yellow bi-color LEDs on both the left and right sides, allowing multi-state visual indication (such as link speed, activity, or diagnostics). The host PCB must provide suitable current-limiting resistors and drive circuitry connected to the PHY LED outputs.

Is the LPJG27037A4NL suitable for Power over Ethernet (PoE)?

No. The LPJG27037A4NL is specified as a Non-PoE connector for data-only Gigabit Ethernet interfaces. For systems requiring PoE or PoE+ power delivery, a MagJack with dedicated PoE-rated magnetics and DC current paths should be selected.

What contact plating options are available for the LPJG27037A4NL?

The LPJG27037A4NL is available with 6 micro-inch, 15 micro-inch, or 30 micro-inch gold plating options at the contact mating area. Selection should be evaluated based on the expected mating cycles, operating environment, and application durability requirements.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.