HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJG27037AFNL双绿灯.jpg
  • LPJG27037AFNL双绿灯2.jpg
  • 双绿灯(1711684082634).jpg
  • LPJG27037AFNL双绿灯4.jpg
  • LPJG27037AFNL双绿灯1.jpg

Belfuse 0879-2G2R-Y4 Compatible LINK-PP LPJG27037AFNL 10/100/1000 Base-T 8p8c Green/Green LED 2x2 Port RJ45 Modular Jack

P/N:

LPJG27037AFNL

Manufacturer:

LINK-PP

Compatible Brand:

Belfuse

Compatible P/N:

LPJG27037AFNL

  • Compatible Brands: Belfuse
  • Number of Ports: 2X2
  • Speed: 10Base-T,100Base-TX,1000Base-T
  • PoE: Non-PoE
  • Latch: Both
  • LED Option: Green / Green
  • Shield EMI Tabs: YES
  • Temperature: -40℃ to +85°C
  • P/N: LPJG27037AFNL
  • Manufacturer: LINK-PP
  • Compatible Brand: Belfuse
  • Compatible P/N: 0879-2G2R-Y4

Packaging Details:

N.W/pCS:

0.034kg

Package:

Tray

SPQ:

18pcs

Qty/carton:

324pcs

Carton size:

37*30*30cm

G.W/carton:

11kg

Product Specifications

LINK-PP Part Number LPJG27037AFNL Belfuse Part Number 0879-2G2R-Y4
Part Status Active Connector Type Jack
Number of Positions/Contacts 8P8C (RJ45, Ethernet) Application-LAN Ethernet (Non-PoE)
Number of Ports 2x2 Port Speed 10/100/1000BASE-T
Latch Both Cores per Port 8
Orientation 90° Angle (Right) PCB Mount Angle Side Entry
Shield EMI Tabs With LED Option Green / Green
PCB FR4 PCB Retaining Post T-Post
Package Height (Inches/mm) 1.015 / 25.79 Package Length (Inches/mm) 1.118 / 28.40
Package Width (Inches/mm) 1.230 / 31.24 Temperature -40°C to +85°C
BST Circuit Yes AutoMDX Yes
Diodes No Contact Mating Area Plating Gold 6µ" / 15µ" / 30µ"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T, C

Belfuse 0879-2G2R-Y4 Compatible Stacked 2x2 Port Industrial Gigabit 10/100/1000BASE-T Integrated RJ45 MagJack

The LINK-PP LPJG27037AFNL is a stacked 2x2 multi-port integrated RJ45 MagJack engineered for 10/100/1000BASE-T Gigabit Ethernet applications in wide-temperature non-PoE network architectures. By arranging four 8P8C ports into a 2-over-2 matrix within a 31.24 mm horizontal board-edge width, it delivers high I/O port density while operating across an extended industrial temperature range of -40°C to +85°C.

The connector features a 90° right-angle, side-entry through-hole profile with dual latching (Tab-Up on upper ports, Tab-Down on lower ports), integrated 8-core magnetics per port, Bob Smith termination, Green/Green status LEDs for all four ports, T-Post mechanical PCB retention, and a metal shield with EMI tabs. It is positioned as a compatible alternative to the Belfuse 0879-2G2R-Y4 for network interface cards (NICs), optical network terminals (ONT), surveillance webcams, hard disk players, and embedded computing systems where board space, thermal resilience, and front-panel port density are primary design constraints.

Hardware designers should verify the mechanical drawing, pin assignment, PCB land pattern, and PHY manufacturer interface guidelines against product documentation before releasing PCB layouts for production.

Ethernet Speed: 10/100/1000BASE-T Gigabit
Reference Part: Belfuse 0879-2G2R-Y4
Port Layout: Stacked 2x2 (4 Ports Total)
Operating Temperature: -40°C to +85°C Industrial
Latching: Dual Latch (Both)
LED Option: Green / Green LEDs

Belfuse 0879-2G2R-Y4 Compatible Design Positioning

The LPJG27037AFNL is positioned as a compatible alternative to the Belfuse 0879-2G2R-Y4 for 10/100/1000BASE-T Gigabit Ethernet applications, providing hardware engineering and procurement teams with a potential second-source option for designs requiring comparable package, footprint, and interface characteristics.

To ensure proper integration on existing or new motherboard designs, engineering teams should cross-reference the mechanical drawing, pin assignment, solder pad geometry, and electrical characteristics against original design requirements prior to volume release.

Stacked 2x2 Density and Industrial Thermal Range (-40°C to +85°C)

High-density multi-port hardware deployed across commercial and industrial environments requires connector assemblies that balance space efficiency with thermal operating requirements:

  • Compact 2x2 Port Arrangement: The 31.24 mm product width provides a substantially narrower board-edge footprint than a typical four-port horizontal arrangement. Actual space savings depend on the selected 1x4 connector geometry.
  • -40°C to +85°C Operating Range: Specified for industrial temperature ranges, the connector assembly is rated for operation across wider ambient temperature conditions.
  • Non-PoE Data Architecture: By dedicating the internal magnetics solely to differential data transmission, the connector avoids additional thermal buildup associated with high DC power injection.

Integrated 8-Core Magnetics per Port and AutoMDX Support

Each of the four ports incorporates an internal 8-core magnetic structure with a 1CT:1CT turns ratio and T, C configuration. The integrated magnetics provide the electrical interface between the Gigabit Ethernet PHY and the cable-side RJ45 connection while reducing the need for separate discrete magnetic components on the host board.

The connector includes a Bob Smith termination (BST) circuit and supports AutoMDX-compatible Gigabit Ethernet designs. Hardware designers should evaluate the MagJack together with the selected PHY, differential-pair routing, PCB grounding, and system-level EMC requirements.

Mechanical Design and Stacked Enclosure Considerations

Stacked 2x2 connectors introduce specific mechanical and interface considerations due to their vertical height and multi-cable layout:

1. 2x2 Package Envelope

The connector body measures 25.79 mm (1.015 inches) in height, 28.40 mm (1.118 inches) in length, and 31.24 mm (1.230 inches) in width. Mechanical designers must verify vertical clearance within enclosure envelopes including motherboard standoff heights.

2. Dual Latch Configuration (Latch: Both)

The connector uses opposing latch orientations, with Tab-Up latches on the upper ports and Tab-Down latches on the lower ports. This arrangement can improve access to individual plug-release tabs in a stacked four-port configuration, subject to the surrounding enclosure geometry.

3. T-Post Mechanical Retention

Molded T-Post retention features help position and mechanically retain the 25.79 mm tall connector housing on the FR4 PCB. The host PCB design should be evaluated together with the connector solder joints to provide adequate mechanical support during repeated cable insertion, extraction, and handling.

4. Shielding and Chassis Grounding Tabs

The connector is wrapped in a metal shield equipped with top and side EMI grounding tabs. These tabs establish contact with the equipment front panel, supporting the system-level shielding and grounding architecture.

5. Status LED Indicators

Each port is equipped with Green LEDs on both the left and right positions for visual link and network activity indication. Current-limiting resistors and drive circuits must be implemented on the host PCB in accordance with PHY specifications.

Architecture Comparison: Stacked 2x2 MagJack vs. Alternative Layouts

Evaluation Metric LPJG27037AFNL
Industrial Stacked 2x2
Stacked 2x2
Commercial (0°C to +70°C)
1x4 Horizontal
Ganged MagJack
Port Configuration 2x2 (4 Ports Total) 2x2 (4 Ports Total) 1x4 (4 Ports Total)
Operating Temperature -40°C to +85°C Model-dependent Model-dependent
Horizontal Width 31.24 mm Model-dependent Typically wider
Latch Architecture Tab-Up (Top) / Tab-Down (Bottom) Model-dependent Model-dependent
LED Indication Green / Green per port Model-dependent Model-dependent
Primary Design Focus Extended thermal range & compact dual-row I/O Standard commercial applications Low-profile single-row enclosures

Application Considerations for LPJG27037AFNL

Potential Application Profile Potential Plating Option Primary Engineering Consideration
Multi-Port Network Interface Cards (NICs) Gold 15µ" / 30µ" High-density four-port Gigabit Ethernet connectivity for network interface and expansion-board designs where connector height and front-panel geometry must be controlled.
Optical Network Terminals (ONT/ONU) & Gateways Gold 15µ" Compact four-port Gigabit Ethernet interface for gateway and optical-terminal designs where board-edge density and front-panel space are important.
Multi-Port Video & Surveillance Hardware Gold 15µ" / 30µ" -40°C to +85°C operating temperature range, compact 31.24 mm width, and dual Green status LEDs.
Hard Disk Players & Network Storage Appliances Gold 6µ" / 15µ" Gigabit throughput, multi-port board footprint, perimeter EMI shielding tabs for panel bonding.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials (BOM) using the LPJG27037AFNL, hardware engineers should confirm the following design parameters against the official product drawing:

  • Package Dimensions & Vertical Clearance: Verify the 25.79 mm height, 31.24 mm width, and 28.40 mm length against enclosure height and front-panel cutout dimensions.
  • PCB Land Pattern: Check through-hole pad diameters, T-Post hole locations, and shield grounding pin drill sizes on the manufacturer's footprint drawing.
  • Dual Latch Clearances: Ensure adequate clearance above and below the connector faceplate cutout for both upper (Tab-Up) and lower (Tab-Down) plug latch disengagement.
  • Green/Green LED Drive Circuitry: Implement suitable series current-limiting resistors and drive circuits on the host PCB matched to the LED channels for all four ports.
  • PHY Interface & Differential Routing: Verify four-port 1000BASE-T differential pair routing, trace length matching, and AutoMDX compatibility with the selected PHY transceivers.
  • Thermal Operating Environment: Confirm that the operating environment remains within the specified -40°C to +85°C industrial temperature range.

Frequently Asked Questions

Is the LINK-PP LPJG27037AFNL a compatible alternative to the Belfuse 0879-2G2R-Y4?

The LPJG27037AFNL is designed as a compatible alternative to the Belfuse 0879-2G2R-Y4 with a stacked 2x2 (4-port) Gigabit MagJack configuration, dual latching (Both), Green/Green LEDs, 90° right-angle through-hole mounting, T-Post PCB retention, EMI shielding tabs, and an industrial operating temperature range of -40°C to +85°C. Engineers should verify the mechanical drawing, pin assignments, and PCB land pattern before production use.

What is the mechanical benefit of a stacked 2x2 connector over a horizontal 1x4 configuration?

A stacked 2x2 connector arranges four ports in a 2-over-2 matrix occupying 31.24 mm of horizontal board width, providing a substantially narrower board-edge footprint than horizontal four-port arrangements. This supports higher port density on front panels where horizontal space is constrained.

What does the "Both" latch specification indicate?

The "Both" latch specification indicates that the connector uses dual-direction latching: the top row of ports features Tab-Up latches, while the bottom row features Tab-Down latches. This orientation can improve access to individual release tabs in a stacked four-port configuration, subject to surrounding enclosure geometry.

What is the significance of the -40°C to +85°C operating temperature rating?

The -40°C to +85°C specification defines the stated operating temperature range of the LPJG27037AFNL. This extended range makes the device relevant to network equipment exposed to wider ambient temperature conditions. Final system qualification should also consider the host PHY, PCB, enclosure, airflow, and other components in the complete assembly.

How are the Green/Green LEDs configured on this 2x2 MagJack?

Each of the four ports features Green LEDs on both the left and right positions for visual link and activity status. The host PCB must provide suitable current-limiting resistors and drive circuitry connected to the PHY LED outputs.

Is the LPJG27037AFNL suitable for Power over Ethernet (PoE)?

No. The LPJG27037AFNL is specified as a Non-PoE connector for data-only Gigabit Ethernet interfaces. For systems requiring PoE or PoE+ power delivery, a MagJack with dedicated PoE-rated magnetics and DC current paths should be selected.

What contact plating options are available for the LPJG27037AFNL?

The LPJG27037AFNL is available with 6 micro-inch, 15 micro-inch, or 30 micro-inch gold plating options at the contact mating area. Selection should be evaluated based on the expected mating cycles, operating environment, and application durability requirements.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.