LPJG27501CNL 1000 Base-T 2x2 Port RJ45 Connector Jack
P/N:
LPJG27501CNL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJG27501CNL
- Compatible Brands: LINK-PP
- Number of Ports: 2X2
- Speed: 10Base-T,100Base-TX,1000Base-T
- PoE: Non-PoE
- Latch: Both
- Mounting Type: THT
- LED Option: No LEDs
- Shield EMI Tabs: YES
- Temperature: 0℃ to 70℃
- P/N: LPJG27501CNL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LPJG27501CNL
Packaging Details:
N.W/pCS:
0.034kg
Package:
Tray
SPQ:
18pcs
Qty/carton:
324pcs
Carton size:
37*30*30cm
G.W/carton:
11kg
Product Specifications
| LINK-PP Part Number | LPJG27501CNL | Connector Type | Jack |
| Part Status | Active | Mounting Type | Through Hole |
| Number of Positions/Contacts | 8P8C (RJ45, Ethernet) | Application-LAN | Ethernet (Non-PoE) |
| Number of Ports | 2x2 Port | Speed | 10/100/1000BASE-T |
| Latch | Both | Cores per Port | 8 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | Side Entry |
| Shield EMI Tabs | With | LED Option | Without LEDs |
| PCB | FR4 | PCB Retaining Post | T-Post |
| Package Height (Inches/mm) | 1.015 / 25.79 | Package Length (Inches/mm) | 1.118 / 28.40 |
| Package Width (Inches/mm) | 1.230 / 31.24 | Temperature | 0°C to +70°C |
| BST Circuit | Yes | AutoMDX | Yes |
| Diodes | No | Contact Mating Area Plating | Gold 6µ" / 15µ" / 30µ" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T, C |
Stacked 2x2 Port Gigabit 10/100/1000BASE-T Integrated RJ45 MagJack for High-Density Networking Hardware
The LINK-PP LPJG27501CNL is a stacked 2x2 multi-port integrated RJ45 MagJack designed for high-density 10/100/1000BASE-T Gigabit Ethernet applications in non-PoE system architectures. By arranging four 8P8C ports into a dual-row (2-over-2) matrix, it delivers high I/O port density while consuming only 31.24 mm of horizontal board-edge space.
The connector features a 90° right-angle, side-entry through-hole profile with dual latching (Tab-Up on upper ports, Tab-Down on lower ports), integrated 8-core magnetics per port, Bob Smith termination, T-Post mechanical PCB retention, and metal shielding with EMI tabs. Specified for an operating temperature range of 0°C to +70°C in a without-LED configuration, it is suited for enterprise switches, multi-port routers, rackmount appliances, and embedded communication systems.
Hardware engineers should review the mechanical drawing, pin assignment, PCB land pattern, and PHY manufacturer interface guidelines against system requirements before releasing board layouts for production.
Stacked 2x2 Multi-Port Topology and Front-Panel Space Optimization
In space-constrained networking hardware such as 1U rackmount switches and multi-port server adapters, horizontal PCB edge space is often the primary physical bottleneck. Comparing port geometries highlights the structural advantages of a stacked 2x2 arrangement:
- 50% Horizontal Board-Edge Savings: A conventional 1x4 horizontal ganged connector requires approximately 63.75 mm of board-edge width, whereas the stacked 2x2 LPJG27501CNL occupies only 31.24 mm, freeing critical horizontal perimeter space for power inputs, serial interfaces, or additional optical cages.
- Consolidated Multi-Port Assembly: Solder-mounting a single 2x2 connector replaces four discrete single-port jacks, eliminating component placement variance and ensuring uniform front-panel cutout alignment.
- Unified Metal Shielding: The shared metal shield encloses all four internal port cavities, providing a low-impedance ground path to the chassis through perimeter grounding tabs.
Integrated 8-Core Magnetics per Port and Non-PoE Layout
Each of the four ports in the LPJG27501CNL incorporates an internal 8-core magnetic structure with a 1CT:1CT turns ratio (T, C configuration). This integrates the isolation transformers and common-mode chokes directly into the connector assembly, eliminating the need for large discrete magnetic modules on the motherboard.
Because the connector is engineered specifically for non-PoE architectures, the internal magnetic layout is dedicated entirely to differential data transmission without allocating space or thermal margins to high-current DC power paths. This helps keep the internal cavity temperature balanced under heavy four-port traffic loads.
Hardware designers should evaluate the MagJack in conjunction with the host Gigabit PHY transceivers, controlled-impedance differential trace routing, ground plane design, and enclosure EMC strategy to ensure proper physical-layer performance.
Mechanical Design and Stacked Stress Distribution
Stacked 2x2 connectors introduce specific mechanical considerations due to their vertical height and multi-cable insertion profile:
1. 2x2 Package Envelope
The connector body measures 25.79 mm (1.015 inches) in height, 28.40 mm (1.118 inches) in length, and 31.24 mm (1.230 inches) in width. Mechanical designers must verify vertical clearance within 1U enclosure envelopes (44.45 mm total height) including motherboard standoff heights.
2. Dual Latch Configuration (Latch: Both)
To ensure easy cable release in stacked configurations, the connector utilizes an opposing latch orientation: the upper two ports feature Tab-Up latches, while the lower two ports feature Tab-Down latches. This allows users to access the release tabs of both upper and lower patch cables without mechanical interference.
3. T-Post Mechanical Retention
Molded T-Post retention posts anchor the 25.79 mm tall connector housing into the FR4 PCB. These locating posts help absorb the cumulative axial and shear forces generated when multiple network cables are inserted, extracted, or flexed, protecting through-hole solder terminals from mechanical fatigue.
4. Shielding and Chassis Grounding Tabs
The connector is wrapped in a metal shield equipped with top and side EMI grounding tabs. These tabs establish multi-point contact with the equipment front panel, supporting the system-level shielding and grounding architecture.
5. Without-LED Configuration
The LPJG27501CNL is built in a without-LED configuration. This simplifies internal connector routing and allows equipment designers to implement custom front-panel light pipes or board-mounted surface-mount status LEDs according to system aesthetic and layout requirements.
Architecture Comparison: Stacked 2x2 MagJack vs. Alternative Implementations
| Evaluation Metric | LPJG27501CNL Stacked 2x2 MagJack |
1x4 Horizontal Ganged MagJack |
2x2 Non-Magnetic Jack + Discrete Magnetics |
|---|---|---|---|
| Horizontal Board-Edge Width | Compact (~31.24 mm) — 50% width reduction | Wide (~63.75 mm) — consumes extensive board edge | Compact (~31.24 mm) |
| Vertical Clearance Required | 25.79 mm (Suited for standard 1U/chassis) | Low (~13.10 mm) | 25.79 mm |
| Magnetics Integration | Integrated 8 cores per port (32 cores total) | Integrated magnetics inside housing | Separate discrete magnetic ICs required on PCB |
| Latch Architecture | Dual Latch (Tab-Up top / Tab-Down bottom) | Single-direction (Typically Tab-Up) | Dual Latch (Both) |
| PCB Component Count | Lowest — single component for 4 ports | Low — single component | High — requires connector plus multiple magnetic ICs |
| Primary Application | High-density 1U switches, routers, multi-port NICs | Low-profile blade systems, desktop routers | Custom PHY matching or specialized isolation layouts |
Application Considerations for LPJG27501CNL
| Target Application Profile | Potential Plating Option | Primary Engineering Consideration |
|---|---|---|
| Enterprise Multi-Port Switches & Routers | Gold 15µ" / 30µ" | High port density in 1U faceplates, 1000BASE-T Gigabit throughput, and robust multi-point EMI grounding. |
| 1U Rackmount Security & Network Appliances | Gold 15µ" | Saves horizontal panel width for power inputs and optical uplinks; dual-latch clearance for easy cabling. |
| Multi-Port PCIe Network Interface Cards (NICs) | Gold 15µ" / 30µ" | Fits four Gigabit Ethernet ports within a standard-height PCIe bracket envelope. |
| Industrial Communications & Automation Gateways | Gold 6µ" / 15µ" | T-Post mechanical anchoring against vibration; integrated magnetics simplify multi-channel physical-layer routing. |
Engineering Verification Checklist
Before releasing a PCB layout or finalizing a bill of materials (BOM) using the LPJG27501CNL, hardware engineers should confirm the following design parameters against the official product drawing:
- Package Dimensions & Vertical Clearance: Verify the 25.79 mm height, 31.24 mm width, and 28.40 mm length against enclosure height and front-panel cutout dimensions.
- PCB Land Pattern: Check through-hole pad diameters, T-Post hole locations, and shield grounding pin drill sizes on the manufacturer's footprint drawing.
- Dual Latch Clearances: Ensure adequate clearance above and below the connector faceplate cutout for both upper (Tab-Up) and lower (Tab-Down) plug latch disengagement.
- PHY Interface & Differential Routing: Verify four-port 1000BASE-T differential pair routing, trace length matching, and AutoMDX compatibility with the selected PHY transceivers.
- Operating Temperature Range: Validate that the component operating environment remains within the specified 0°C to +70°C range.
- External LED Implementation: If port status indication is required, verify placement of host-board SMT LEDs or light pipe guides on the front panel.
Frequently Asked Questions
What are the primary specifications of the LINK-PP LPJG27501CNL?
The LPJG27501CNL is a stacked 2x2 (4-port) integrated RJ45 MagJack supporting 10/100/1000BASE-T Gigabit Ethernet. It features 8-core integrated magnetics per port, dual latching (Both), 90° right-angle through-hole mounting, T-Post PCB retention, EMI shielding tabs, a without-LED configuration, and an operating temperature range of 0°C to +70°C.
What is the mechanical advantage of a stacked 2x2 connector over a 1x4 horizontal configuration?
A stacked 2x2 connector arranges four ports in a 2-over-2 matrix occupying 31.24 mm of horizontal board width, compared to approximately 63.75 mm for a 1x4 horizontal ganged jack. This provides roughly 50% horizontal board-edge space savings, enabling higher port density on 1U faceplates and PCIe cards.
What does the "Both" latch specification indicate for this connector?
The "Both" latch specification indicates that the connector uses dual-direction latching: the top row of ports features Tab-Up latches, while the bottom row features Tab-Down latches. This orientation ensures that cable release tabs can be accessed independently without interfering with adjacent plugs.
Why is the LPJG27501CNL specified in a without-LED configuration?
The without-LED design reduces through-hole pin count and internal routing complexity, giving system designers the freedom to implement custom front-panel light pipes or discrete surface-mount LEDs on the host PCB.
Is the LPJG27501CNL suitable for Power over Ethernet (PoE) applications?
No. The LPJG27501CNL is specified as a Non-PoE connector for data-only Gigabit Ethernet interfaces. For applications requiring PoE or PoE+ power delivery, a MagJack with dedicated PoE-rated magnetics and DC current capability should be selected.
What contact plating options are available for the LPJG27501CNL?
The LPJG27501CNL is available with 6 micro-inch, 15 micro-inch, or 30 micro-inch gold plating options at the contact mating area. Selection should be evaluated based on the expected mating cycles, operating environment, and application durability requirements.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































