HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJG27747AFNL.jpg
  • LPJG27747AFNL2.jpg
  • LPJG27747AFNL4.jpg
  • LPJG27747AFNL3.jpg
  • LPJG27747AFNL1.jpg

LPJG27747AFNL 10/100/1000 Base-T Green/Yellow LED 2x2 Port Cat6 RJ45 Modular Jack

P/N:

LPJG27747AFNL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJG27747AFNL

  • Compatible Brands: LINK-PP
  • Number of Ports: 2X2
  • Speed: 10Base-T,100Base-TX,1000Base-T
  • PoE: Non-PoE
  • Latch: Both
  • LED Option: Green / Yellow
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJG27747AFNL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LPJG27747AFNL

Packaging Details:

N.W/pCS:

0.034kg

Package:

Tray

SPQ:

18pcs

Qty/carton:

324pcs

Carton size:

37*30*30cm

G.W/carton:

10kg

Product Specifications

LINK-PP Part Number: LPJG27747AFNL Connector Type Jack
Part Status Active Mounting Type As specified in the applicable drawing
Number of Positions/Contacts 8p8c (RJ45, Ethernet) Application-Lan Ethernet(NoN PoE)
Number of Ports 2x2 Port Speed 10/100/1000 Base-T
Latch Both Cores per Port 8
Orientation 90° Angle (Right) PCB Mount Angle

SIDE ENTRY

Shield EMI Tabs With LED Option

Green/Yellow Led

PCB FR4 PCB Retaining Post

T POST

Package Height (Inches/mm) 1.005/25.52 Package Length (Inches/mm)

1.236/31.40

Package Width (Inches/mm) 1.240/31.50 Temperature 0℃ TO +70℃
Bst Circuit Yes AutomDX

YES

Diodes No Contact Mating Area Plating

GOLD 6u"/15u"/30u"

Turns Ratio RX/TX 1CT:1CT Configuration RX/TX

T,C

Quad-Port Stacked 2x2 10/100/1000BASE-T RJ45 MagJack

The LINK-PP LPJG27747AFNL is a quad-port stacked 2x2 10/100/1000BASE-T Gigabit Ethernet RJ45 MagJack in a right-angle, side-entry through-hole configuration. Each port incorporates an 8-core magnetic structure with a 1CT:1CT turns ratio and T, C configuration. The connector also includes Bob Smith termination (BST), AutoMDX support, Green/Yellow LEDs, and a specified operating temperature range of 0°C to +70°C.

The mechanical package features a housing height of 25.52 mm (1.005 inches), a length of 31.40 mm (1.236 inches), and a width of 31.50 mm (1.240 inches), arranged in a 2-high by 2-wide port matrix. Designed with dual-latch ("Both") orientation, perimeter shield EMI tabs, and molded plastic T-Posts, the LPJG27747AFNL provides a consolidated board-level interface for multi-port networking cards, optical terminals, IP surveillance equipment, and video storage appliances.

Lifecycle: Active
Ethernet Speed: 2x2 Port 10/100/1000 Base-T
Cross Reference: Pulse JXC0-0376NL
Port Matrix & Latch: Stacked 2x2 Port / Both Latch
Operating Temperature: 0℃ TO +70℃ Commercial
Sourcing Position: Cross-Reference / Second-Source Evaluation

Compatibility and Design Positioning

The LINK-PP LPJG27747AFNL is positioned as a cross-reference and alternative sourcing option for the Pulse Electronics JXC0-0376NL stacked 2x2 Gigabit RJ45 MagJack. It provides a comparable 2x2 port architecture, 10/100/1000BASE-T interface, 1CT:1CT turns ratio, 8-core-per-port configuration, Green/Yellow LEDs, and 0°C to +70°C operating range. Engineering and procurement teams should verify pin assignment, PCB footprint, LED circuitry, electrical characteristics, and mechanical dimensions against the applicable official drawings before approving a component substitution.

Procurement and OEM Qualification

For sourcing teams and OEM engineering programs evaluating the LPJG27747AFNL as a second-source or BOM alternative, key qualification parameters include PCB mechanical footprint, pinout alignment, LED drive characteristics, electrical characteristics, operating temperature rating, and expected volume demand. LINK-PP can support sample evaluation, mechanical drawing review, and documentation requirements for prototype validation, AVL qualification, and volume production planning. Sourcing teams should verify lead-time requirements, applicable packaging requirements, and contact plating selection (6µ", 15µ", or 30µ") based on project lifecycle demands.

Stacked 2x2 Topology and Front-Panel High-Density Optimization

Integrating four Gigabit Ethernet ports into a 2-high by 2-wide stacked connector format provides practical packaging and mechanical layout considerations for multi-port systems:

  • High-Density 2x2 Port Matrix: Four Gigabit Ethernet ports are arranged within a 31.50 mm-wide stacked 2x2 connector assembly, consolidating board-edge connectivity compared with using four independently placed single-port connectors.
  • Dual-Latch ("Both") Orientation: The upper and lower port rows use opposing latch orientations, which can improve access to individual RJ45 release tabs in a stacked configuration when sufficient enclosure clearance is provided.
  • 25.52 mm Vertical Height Profile: The connector has a defined 25.52 mm housing height for stacked four-port implementations. Enclosure and expansion-card designers should verify the available vertical clearance and front-panel opening against the product drawing.
  • 0°C to +70°C Operating Range: The 0°C to +70°C specification defines the stated operating temperature range of the connector assembly, supporting commercial computing, video processing, and enterprise networking hardware.
  • EMI Tabs & T-Post Retention: The shield includes perimeter EMI tabs for system-level chassis contact, while molded T-Post features help locate and mechanically retain the connector on the host PCB.

Integrated 8-Core Magnetics per Port and AutoMDX Support

Each of the four Ethernet ports incorporates an internal 8-core magnetic structure with a 1CT:1CT turns ratio and T, C configuration. The integrated magnetics provide the electrical interface between the Gigabit Ethernet PHY and the cable-side RJ45 connection while reducing the need for separate discrete magnetic components on the host board.

The connector includes a Bob Smith termination (BST) circuit and supports AutoMDX-compatible Gigabit Ethernet designs. Hardware designers should evaluate the MagJack together with the selected PHY reference design, differential-pair routing, PCB grounding, and system-level EMC requirements. The LPJG27747AFNL is specified for Non-PoE Ethernet applications.

Mechanical Envelope and PCB Layout Considerations

When integrating the LPJG27747AFNL into host hardware layouts, engineering teams should observe the following structural and layout parameters:

1. Package Dimensions and Front-Panel Cutout

The connector body measures 25.52 mm (1.005 inches) in height, 31.40 mm (1.236 inches) in length, and 31.50 mm (1.240 inches) in width. Front-panel openings should provide appropriate clearance for the connector shield profile, EMI tabs, and cable plug access.

2. Dual-Latch ("Both") Headroom and Servicing

Because the upper ports latch upward and the lower ports latch downward, designers should ensure adequate clearance above and below the connector opening so field technicians can access the plug latches during cable disconnection.

3. Through-Hole T-Post Anchoring and Multi-Layer Pinout

The stacked 2x2 through-hole footprint includes multiple signal, ground, and LED pins to support all four ports. Verification of drill hole diameters, annular rings, and trace routing breakout channels between adjacent pins is essential. Designers should follow the manufacturer's recommended copper keep-out and clearance requirements on the host PCB.

4. Status LED Circuitry

The connector features Green and Yellow status indicators for each port. Hardware engineers should implement suitable series current-limiting resistors matching the host PHY LED driver polarity and target forward current specifications.

Design Consideration Comparison: Stacked 2x2 MagJack vs. Alternative Layouts

Design Consideration LPJG27747AFNL Stacked 2×2 Gigabit MagJack 4× Single-Port 1×1 Gigabit MagJacks (Side-by-Side) Discrete Gigabit Magnetics + Modular 2×2 RJ45 Jack
Horizontal Board-Edge Width 31.50 mm (Consolidated) Model-dependent (Requires spacing between individual jacks) Model-dependent
Vertical Height Envelope 25.52 mm profile Model-dependent Model-dependent
PCB Assembly Operations Single through-hole placement Four separate through-hole placements Multiple placements (SMD transformers + jack)
Latch Accessibility Dual-Latch (Both: Upper up / Lower down) Dependent on selected 1×1 orientation Dependent on selected modular jack
Front-Panel Shielding Integrated 4-port shield with perimeter EMI tabs Individual shields per port Dependent on chosen external RJ45 shield design
Primary Engineering Focus Front-panel horizontal space consolidation (4 ports) Independent single-port placement and lower-profile options, depending on selected model Custom physical placement flexibility

Application Considerations for LPJG27747AFNL

Target Application Profile Primary Engineering Consideration
Multi-Port Network Interface Cards (NICs) Stacked 2x2 architecture consolidates four Gigabit Ethernet interfaces where board-edge width and front-panel port density are design priorities.
Optical Network Terminals (ONT) & Gateways Provides a compact four-port Ethernet interface for local LAN distribution in broadband customer-premises equipment (CPE).
IP Surveillance & NVR Equipment Stacked four-port Gigabit Ethernet connectivity can consolidate multiple network interfaces where front-panel space is limited.
Video & Network Storage Equipment Integrated Green/Yellow LEDs can be configured through the host PHY for supported link, speed, or activity indication functions.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials using the LPJG27747AFNL, hardware engineers should confirm the following design parameters against official documentation:

  • Footprint and Pinout Verification: Verify the stacked 2x2 through-hole pinout, LED pin locations, and T-Post drill sizes against the official LINK-PP LPJG27747AFNL drawing.
  • Bezel Cutout & Dual-Latch Clearance: Confirm that the enclosure front panel provides adequate clearance above and below the port openings for cable plug latch engagement and release.
  • LED Drive Polarity and Resistors: Check the host PHY LED driver configuration (active-high or active-low) and select appropriate series resistors for the Green/Yellow LEDs on all four channels.
  • Chassis Grounding Path: Verify that the PCB shield pins connect to a low-impedance chassis ground plane according to the host system grounding plan.
  • PHY Magnetics Compatibility: Confirm that the 1CT:1CT turns ratio and BST termination topology align with the multi-channel transceiver manufacturer's reference schematic.
  • Thermal Environment: Ensure that the operating environment inside the equipment chassis remains within the specified 0°C to +70°C commercial temperature range.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LPJG27747AFNL?

The LPJG27747AFNL is a quad-port stacked 2x2 10/100/1000BASE-T non-PoE Gigabit Ethernet RJ45 MagJack. It features an 8P8C interface per port, 8-core integrated magnetics per port, a 1CT:1CT turns ratio, dual-latch ("Both") orientation, side-entry through-hole mounting, Green/Yellow LEDs, an integrated BST circuit, AutoMDX support, and a specified operating temperature range of 0°C to +70°C.

Is the LINK-PP LPJG27747AFNL compatible with the Pulse JXC0-0376NL?

The LPJG27747AFNL is positioned as a cross-reference and alternative sourcing option for the Pulse Electronics JXC0-0376NL stacked 2x2 Gigabit RJ45 MagJack. It provides a comparable 2x2 port architecture, 10/100/1000BASE-T interface, 1CT:1CT turns ratio, 8-core-per-port configuration, Green/Yellow LEDs, and 0°C to +70°C operating range. Engineering and procurement teams should verify pin assignment, PCB footprint, LED circuitry, electrical characteristics, and mechanical dimensions against the applicable official drawings before approving a component substitution.

What does the "Both" latch orientation mean on a stacked 2x2 connector?

On a stacked 2x2 connector, the "Both" latch orientation indicates that the upper row of RJ45 ports uses Tab-Up latches while the lower row uses Both latches. This opposing arrangement can improve access to individual release tabs in stacked configurations when sufficient enclosure clearance is provided above and below the port openings.

What are the design considerations of a stacked 2x2 MagJack compared to single-port connectors?

A stacked 2x2 MagJack integrates four Gigabit Ethernet ports into a single housing measuring 31.50 mm (1.240 inches) in width. This consolidates board-edge footprint consumption, simplifies through-hole placement by using a single connector assembly, and reduces the number of separate front-panel cutouts required.

How are the Green and Yellow LEDs driven on the host PCB?

The connector includes separate Green and Yellow status indicators for each of the four ports. The LED functions should be configured according to the host PHY reference design and the connector's electrical specifications. Depending on the selected LED control scheme, the indicators may be used for link speed, link status, or activity indication.

Does the LPJG27747AFNL support Power over Ethernet (PoE)?

No. The LPJG27747AFNL is specified as an Ethernet (Non-PoE) connector for data-only Gigabit interfaces. For applications requiring PoE power delivery, a connector and magnetics solution specifically rated for the required IEEE 802.3 PoE standard and DC current conditions should be selected.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.