LPJG17561A30NL 100/1000 Base-T Tab Both Green/Green&Yellow LED 2X1 Port 10P8C RJ45 Connector
P/N:
LPJG17561A30NL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJG17561A30NL
- Compatible Brands: LINK-PP
- Number of Ports: 2X1
- Speed: 10Base-T,100Base-TX,1000Base-T
- PoE: Non-PoE
- Latch: Both
- Mounting Type: THT
- Shield EMI Tabs: YES
- Temperature: -40℃ to +85°C
- P/N: LPJG17561A30NL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LPJG17561A30NL
Packaging Details:
N.W/pCS:
0.02kg
Package:
Tray
SPQ:
30pcs
Qty/carton:
540pcs
Carton size:
37*30*30cm
G.W/carton:
11kg
Product Specifications
| LINK-PP Part Number: | LPJG17561A30NL | Connector Type | Jack |
| Part Status | Active | Mounting Type | Through Hole |
| Number of Positions/Contacts | 10p8c (RJ45, Ethernet) | Application-Lan | Ethernet(NoN PoE) |
| Number of Ports | 2x1 Port | Speed | 10/100/1000 Base-T |
| Latch | Both | Cores per Port | 8 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | SIDE ENTRY |
| Shield EMI Tabs | With | LED Option | Green/Green&Yellow Led |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.996/25.30 | Package Length (Inches/mm) | 1.122/28.49 |
| Package Width (Inches/mm) | 0.677/17.20 | Temperature | -40℃ TO +85℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
LINK-PP LPJG17561A30NL 2x1 Dual-Port Gigabit 100/1000 Base-T RJ45 Magjack Technical Overview
The LINK-PP LPJG17561A30NL is an industrial-grade dual-port (2x1) side-by-side RJ45 Integrated Connector Module (ICM) with built-in Gigabit 100/1000 Base-T magnetics, Green & Green/Yellow status LEDs, EMI shield tabs, and a Bob Smith Termination (BST) circuit per port. Compliant with IEEE 802.3ab standards, it integrates an 8-core transformer/choke matrix per channel (1CT:1CT turns ratio), delivering dual-channel 1 Gbps full-duplex transmission, 1500Vrms isolation, ESD protection, and extended operating temperature reliability from -40°C to +85°C for intercom systems, optical terminals, embedded mainboards, and Ethernet control units.
- 2x1 Dual-Port Integrated Architecture: Consolidates two Gigabit Ethernet RJ45 ports into a single metal-shielded 2x1 housing, saving SMT placement cycles and PCB real estate compared to two discrete single-port connectors.
- Gigabit Ethernet Magnetics per Channel: 10p8c RJ45 connector per port integrated with an independent 8-core magnetic matrix (1CT:1CT turns ratio) supporting 1000BASE-T full-duplex communication across 4 differential pairs per channel.
- Built-In Circuit Protection & Noise Rejection: Features an integrated Bob Smith Termination (BST) network and Auto-MDIX logic per port for enhanced common-mode EMI suppression and automatic cable crossover detection.
- Industrial Temperature Endurance: Certified for an extended operating temperature range of -40°C to +85°C with optional 6u", 15u", or 30u" gold contact plating for harsh outdoor and factory environments.
LINK-PP LPJG17561A30NL Dual-Port Gigabit RJ45 Magjack Connector Overview
LINK-PP LPJG17561A30NL is a right-angle side-entry 2x1 dual-port RJ45 integrated connector module (ICM) designed for non-PoE Gigabit Ethernet networking platforms. Housing two independent sets of signal transformers, common-mode chokes, visual status LEDs (Green & Green/Yellow), and Bob Smith Termination directly inside a metal-shielded jack with EMI spring tabs, this connector simplifies motherboard layout by replacing discrete PHY magnetics. It provides a highly reliable, dual-port solution for commercial intercoms, optical network terminals (ONT), embedded mainboards, and industrial Ethernet control gateways.
Key Benefits of LINK-PP LPJG17561A30NL Dual-Port Gigabit RJ45 Connector
- 2x1 Dual-Port Consolidation Saves PCB Real Estate: Combines two Gigabit RJ45 ports side-by-side into a single 28.49mm long package, reducing motherboard trace routing complexity and component placement costs.
- Full Gigabit 1000BASE-T Speed (IEEE 802.3ab): Embeds an 8-core transformer and common-mode choke matrix per port that isolates and filters 4 differential pairs per channel, ensuring clean 1 Gbps eye diagrams with minimal differential insertion loss.
- Integrated Bob Smith Termination (BST) & Auto-MDIX per Port: Built-in 75-ohm BST circuits route common-mode EMI noise and ESD transients safely to ground, while Auto-MDIX logic supports automatic straight-through or crossover cable detection.
- EMI Shield Tabs for Enhanced Panel Grounding: Outfitted with external EMI spring tabs on the metal shield frame that press tightly against chassis front panel cutouts, forming a low-impedance grounding loop to suppress radiated emissions.
- Industrial Operating Temperature Range (-40°C to +85°C): Constructed with high-grade FR4 substrate and durable housing to withstand severe thermal fluctuations in unconditioned outdoor cabinets.
- Customizable Gold Contact Plating: Available in Gold 6u", 15u", or 30u" plating thickness options to ensure low contact resistance and corrosion protection across 750+ mating cycles per port.
Integrated Magnetics & Dual-Port 1000BASE-T Signal Architecture
The LINK-PP LPJG17561A30NL utilizes an advanced 2x1 Dual-Port Gigabit Integrated Connector Module (ICM) architecture that embeds 10/100/1000 Base-T magnetics directly behind each RJ45 port pin array, eliminating high-frequency noise radiation caused by long trace runs on the motherboard.
8-Core Per-Port Gigabit Transformer & Choke Configuration
Featuring a 1CT:1CT transmit and receive turns ratio with 8 magnetic cores per channel, the LPJG17561A30NL establishes 1500Vrms galvanic isolation between the Ethernet PHY transceiver chip and the external network cable. The dual 8-core layout provides precise impedance matching across all differential pairs, suppressing inter-pair crosstalk and inter-port channel interference.
Bob Smith Termination (BST) & ESD Rejection
The integrated Bob Smith Termination (BST) networks utilize high-voltage capacitors and precision resistors to balance line impedance on unused cable pairs. This prevents common-mode noise reflection, reduces radiated EMI emissions, and enhances system ESD immunity during cable plugging.
PCB Mounting & Mechanical Specifications
Designed for automated Through-Hole Technology (THT) assembly, the LPJG17561A30NL incorporates robust mechanical features to ensure structural integrity on FR4 substrates.
2x1 Dual-Port Package Geometry & EMI Shield Tabs
With package dimensions of 25.30mm H x 28.49mm L x 17.20mm W, the LPJG17561A30NL provides a compact dual-port footprint. Integrated Green and Green/Yellow LEDs provide clear visual link status and data activity diagnostics per channel, while T-Post mechanical pegs anchor the housing firmly to the motherboard during cable plugging.
Target Applications: Intercom Systems, Optical Terminals, and Ethernet Control
Combining IEEE 802.3ab Gigabit speed, 2x1 dual-port density, BST noise suppression, EMI shield tabs, and industrial thermal endurance (-40°C to +85°C), the LINK-PP LPJG17561A30NL supports diverse embedded systems:
- Commercial & Industrial Intercom Systems: Ideal for IP door intercoms, emergency call stations, and multi-channel audio communication terminals requiring dual Ethernet ports.
- Optical Network Terminals (ONT/ONU) & Fiber Gateways: Deployed in optical network units, FTTH gateways, and fiber-to-the-building distribution nodes.
- Embedded Mainboards & Industrial Automation Controllers: Suitable for dual-LAN industrial computers, DIN-rail automation controllers, and fieldbus interfaces.
How to Select and Verify LINK-PP LPJG17561A30NL RJ45 Magjack
Hardware design engineers and procurement specialists evaluating the LINK-PP LPJG17561A30NL for new designs or second-source qualification should verify the following core parameters:
- 2x1 Dual-Port Footprint Alignment: Confirm that the 2x1 dual-port 10p8c through-hole pin arrangement and T-Post peg locations match your motherboard Gerber layout.
- 8-Core Per-Port Magnetics Compatibility: Confirm that an 8-core magnetic matrix per port (4 differential pairs) and a 1CT:1CT turns ratio match your dual Gigabit Ethernet PHY transceiver reference design.
- LED Option & Driving Polarity: Confirm that the Green & Green/Yellow LED configuration and pin polarity match your host SMT LED driving circuit per channel.
- Package Height & EMI Tab Clearance: Ensure that the 25.30mm package height and external EMI spring tabs fit within your front-panel bezel cutout.
Frequently Asked Questions
What is LINK-PP LPJG17561A30NL?
LINK-PP LPJG17561A30NL is a dual-port (2x1) side-by-side RJ45 Magjack featuring integrated Gigabit 10/100/1000 Base-T magnetics per port, Green & Green/Yellow LEDs, EMI shield tabs, an integrated Bob Smith Termination circuit, and an operating temperature range of -40°C to +85°C.
Does LINK-PP LPJG17561A30NL support Gigabit Ethernet (1000BASE-T)?
Yes. LPJG17561A30NL is equipped with an 8-core magnetic matrix per port supporting 10/100/1000 Base-T full-duplex Gigabit Ethernet data rates compliant with IEEE 802.3ab standards.
What is the port configuration of LPJG17561A30NL?
LPJG17561A30NL features a 2x1 dual-port side-by-side configuration, providing two independent RJ45 Ethernet ports in a single 28.49mm long package.
What is the operating temperature range of LPJG17561A30NL?
LINK-PP LPJG17561A30NL is rated for an industrial operating temperature range of -40°C to +85°C (-40°F to +185°F), making it suitable for unconditioned outdoor equipment and factory automation systems.
What is the function of the integrated Bob Smith Termination (BST) circuit in LPJG17561A30NL?
The integrated Bob Smith Termination (BST) circuit utilizes built-in resistors and capacitors per port to balance line impedance on unused cable pairs, suppressing common-mode EMI noise and protecting the Ethernet PHY against ESD transients.
Is LPJG17561A30NL a Power over Ethernet (PoE) connector?
No. LPJG17561A30NL is a Non-PoE Gigabit RJ45 Magjack designed strictly for Ethernet signal transmission and isolation without DC power delivery.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































