HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJM17061ABNL左绿右黄.jpg
  • IMG_2276(1711594094218).jpg
  • 2(1711594094202).jpg
  • IMG_2287(1711594094190).jpg
  • LPJM17061ABNL左绿右黄1.jpg

LPJM17061ABNL 2.5G Base-T 2X1 Port Magnetic RJ45 Female Connector With Green/Yellow LED

P/N:

LPJM17061ABNL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJM17061ABNL

  • Compatible Brands: LINK-PP
  • Number of Ports: 2X1
  • Speed: 2.5GBase-T
  • PoE: Non-PoE
  • Latch: Both
  • Mounting Type: THT
  • LED Option: Green / Yellow
  • Shield EMI Tabs: YES
  • Temperature: -40℃ to +85°C
  • P/N: LPJM17061ABNL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LPJM17061ABNL

Packaging Details:

N.W/pCS:

0.02kg

Package:

Tray

SPQ:

30pcs

Qty/carton:

540pcs

Carton size:

37*30*30cm

G.W/carton:

11kg

Product Specifications

LINK-PP Part Number: LPJM17061ABNL Connector Type Jack
Part Status Active Mounting Type Through Hole
Application-Lan Ethernet(NoN PoE)    
Number of Ports 2x1 Port Speed 2.5G Base-T
Latch Both Cores per Port 8
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs With LED Option Green/Yellow
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 1.015/25.79 Package Length (Inches/mm) 1.122/28.50
Package Width (Inches/mm) 0.678/17.21 Temperature -40℃ TO +85℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

Dual-Port Stacked 2x1 2.5GBASE-T Industrial RJ45 MagJack

The LINK-PP LPJM17061ABNL is an industrial-grade dual-port stacked 2x1 2.5G Base-T multi-gigabit Ethernet RJ45 integrated connector module (MagJack) in a right-angle, side-entry through-hole configuration. Designed with an internal 8-core-per-port magnetic structure (16 cores total), 1CT:1CT turns ratio, integrated Bob Smith termination (BST), and AutoMDX support, the connector supports IEEE 802.3bz-compliant Ethernet signal isolation and common-mode noise suppression across the specified -40℃ TO +85℃ operating temperature range.

The mechanical assembly features a stacked 2-port vertical matrix, dual-latch ("Both") orientation (top port latch up, bottom port latch down), perimeter shield EMI tabs, Green/Yellow status LEDs, and molded T-Post retaining pins. With dimensions of 25.79 mm (1.015 inches) in height, 17.21 mm (0.678 inches) in width, and 28.50 mm (1.122 inches) in length, the LPJM17061ABNL provides high-density multi-gigabit board-edge connectivity suited for optical network terminals (ONT/ONU), embedded main boards, intercom systems, and industrial Ethernet control controllers.

Lifecycle: Active
Ethernet Speed: 2x1 Port 2.5G Base-T
Port Configuration: Stacked 2x1 Port / Both Latch
Mounting Type: Through Hole (THT)
Operating Temperature: -40℃ TO +85℃ Industrial
Qualification Support: Sample Evaluation / Second Source

Design Positioning and Qualification

The LPJM17061ABNL is designed as an integrated dual-port multi-gigabit RJ45 MagJack for hardware platforms requiring through-hole PCB termination, 2.5G Base-T data rates, and a vertically stacked 2x1 port matrix. It can be evaluated for new hardware designs, BOM consolidation, or as an alternative sourcing option for existing 2.5GBASE-T dual-port stacked designs using comparable mechanical and electrical requirements. Engineering teams should verify pinout mapping, PCB land patterns, LED drive circuits, and mechanical clearances against the official LINK-PP technical drawing before approving production release.

Procurement and OEM Qualification

For procurement teams, sourcing specialists, and OEM hardware programs evaluating the LPJM17061ABNL, qualification activities typically center on BOM qualification, second-source risk mitigation, and production readiness. LINK-PP can support design qualification through mechanical drawing review, sample evaluation, and technical documentation required for prototype validation, approved vendor list (AVL) entry, and volume production planning. Sourcing teams should verify lead-time requirements, applicable packaging requirements, and contact plating selection (6µ", 15µ", or 30µ") based on project lifecycle demands.

Stacked 2x1 Topology and Board-Edge Density Optimization

Integrating two 2.5G Base-T multi-gigabit Ethernet ports into a vertically stacked 2x1 connector format provides distinct mechanical and packaging advantages for space-constrained line cards:

  • 50% Horizontal Board-Edge Space Savings: Stacking two 2.5G ports vertically occupies only 17.21 mm (0.678 inches) of horizontal board width, halving front-panel board-edge space requirements compared to deploying two individual single-port connectors side-by-side.
  • "Both" Latch Ergonomics: The top port features a Tab-Up latch while the bottom port features a Tab-Down latch, ensuring unobstructed thumb access to both RJ45 plug release tabs during installation and servicing.
  • 25.79 mm Vertical Height Profile: The 25.79 mm (1.015 inches) housing height matches standard dual-row chassis cutouts across full-height PCIe add-in cards, network appliances, and desktop terminals.
  • -40℃ TO +85℃ Industrial Operating Range: The -40℃ TO +85℃ specification defines the stated operating temperature range of the connector assembly, supporting equipment deployed in unconditioned industrial cabinets and outdoor housings.
  • Perimeter Shield EMI Tabs & T-Post Retention: Exterior spring tabs establish multi-point contact with the equipment front panel, while molded plastic T-Posts distribute mechanical insertion and extraction stresses directly into the FR4 PCB substrate.

Internal Magnetics Architecture, 2.5G Signaling, and AutoMDX

The LPJM17061ABNL incorporates an internal 8-core magnetic architecture per port (16 cores total across the 2x1 assembly) supporting the four differential pairs required for 2.5G Base-T full-duplex Ethernet communication. A symmetrical 1CT:1CT turns ratio across transmit and receive stages in a T, C configuration enables broad interface compatibility with standard voltage-mode and current-mode multi-gigabit PHY transceivers.

The internal assembly includes an integrated Bob Smith termination (BST) circuit to assist with common-mode noise management. The LPJM17061ABNL is specified for Ethernet interfaces supporting AutoMDX operation. Electrical isolation is specified according to the applicable product documentation, separating host circuitry from cable-side common-mode noise. The LPJM17061ABNL is specified for Non-PoE Ethernet applications.

Mechanical Envelope and PCB Layout Considerations

When integrating the LPJM17061ABNL into host hardware layouts, engineering teams should account for the following structural and layout parameters:

1. Package Dimensions and Front-Panel Cutout

The connector body measures 25.79 mm (1.015 inches) in height, 28.50 mm (1.122 inches) in length, and 17.21 mm (0.678 inches) in width. Front-panel openings must be designed with appropriate vertical and horizontal clearances to allow unhindered deflection of the perimeter EMI spring tabs.

2. Stacked Port Latch Headroom ("Both" Latch)

Because the top port latches upward and the bottom port latches downward, enclosure designers should confirm adequate clearance both above and below the dual-port cutout to allow unhindered finger access when disconnecting cables from either port.

3. Through-Hole T-Post Anchoring and Multi-Layer Pinout

The stacked 2x1 through-hole configuration presents a high-density pin layout to accommodate signals and LEDs for both 2.5G ports. Verification of drill hole diameters and tolerance spacing against the official footprint drawing is necessary to support mechanical seating and solder joint reliability. Designers should follow the manufacturer's recommended copper keep-out and clearance requirements on the host PCB.

4. Status LED Circuitry

The connector features Green and Yellow status indicators for each port. Hardware engineers should implement suitable series current-limiting resistors matching the host PHY LED driver polarity and target forward current specifications.

Design Consideration Comparison: Stacked 2x1 MagJack vs. Alternative Layouts

Design Consideration LPJM17061ABNL
Stacked 2×1 2.5G MagJack
2× Single-Port 1×1
2.5G MagJacks (Side-by-Side)
Discrete 2.5G Magnetics
+ Modular 2×1 RJ45 Jack
Horizontal Board-Edge Width 17.21 mm (High board-edge density) ~32.00 mm – 34.00 mm (Requires dual footprints) ~17.00 mm – 18.00 mm
Vertical Height Envelope 25.79 mm profile ~13.50 mm profile Variable based on selected modular jack profile
PCB Assembly Operations Single through-hole placement Two separate through-hole placements Multiple placements (SMD transformers + jack)
Latch Accessibility Both (Top latch up / Bottom latch down) Dependent on selected 1×1 orientation Dependent on selected modular jack
Front-Panel Shielding Integrated dual-port shield with EMI tabs Individual shields per port Dependent on chosen external RJ45 shield design
Primary Engineering Focus Front-panel horizontal space consolidation Low vertical profile in 1U enclosures Custom physical placement flexibility

Application Considerations for LPJM17061ABNL

Target Application Profile Primary Engineering Consideration
Optical Network Terminals (ONT/ONU) & Gateways Consolidates 2.5 Gbps multi-gigabit LAN ports within space-limited broadband customer-premises equipment (CPE).
Embedded Main Boards & Single-Board Computers Conserves horizontal board-edge space, allowing dual 2.5G Base-T ports on dense embedded computing platforms.
Industrial Ethernet Control & Automation Supports equipment designs operating within the specified -40℃ TO +85℃ operating temperature range.
Intercom Stations & Access Control Systems Vertical port stacking enables redundant network links or device daisy-chaining in flush wall boxes.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials using the LPJM17061ABNL, hardware engineers should confirm the following design parameters against official documentation:

  • Footprint and Pinout Verification: Verify the stacked through-hole pinout, LED pin locations, and T-Post drill sizes against the official LINK-PP LPJM17061ABNL drawing.
  • Bezel Cutout & Dual-Latch Clearance: Confirm that the enclosure front panel provides adequate clearance above and below the port openings for unhindered operation of both latches.
  • LED Drive Polarity and Resistors: Check the host PHY LED driver configuration (active-high or active-low) and select appropriate series resistors for the Green and Yellow LEDs on both channels.
  • Chassis Grounding Path: Verify that the PCB shield pins connect to a low-impedance chassis ground plane according to the host system grounding plan.
  • PHY Magnetics Compatibility: Confirm that the 1CT:1CT turns ratio and BST termination topology align with the dual-channel multi-gigabit transceiver manufacturer's reference schematic.
  • Thermal Environment: Ensure that the operating environment inside the equipment chassis remains within the specified -40℃ TO +85℃ industrial temperature range.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LPJM17061ABNL?

The LPJM17061ABNL is an industrial-grade dual-port stacked 2x1 2.5G Base-T Ethernet(NoN PoE) RJ45 MagJack. It features an 8-core internal magnetics structure per port, 1CT:1CT turns ratio, dual-latch ("Both") orientation, side-entry through-hole mounting, Green/Yellow LEDs, integrated BST circuit, AutoMDX support, and an operating temperature range of -40℃ TO +85℃.

Can the LPJM17061ABNL be evaluated as an alternative sourcing option in existing designs?

Yes. The LPJM17061ABNL can be evaluated as an alternative sourcing option for standard dual-port stacked 2x1 2.5G Base-T RJ45 MagJacks. Engineering teams should cross-reference pinout mapping, package dimensions (25.79 mm height, 28.50 mm length, 17.21 mm width), LED drive requirements, and mechanical clearances against official manufacturer drawings before approving component substitution.

What does the "Both" latch orientation mean on a stacked 2x1 connector?

On a stacked 2x1 connector, the "Both" latch orientation indicates that the top RJ45 port features a Tab-Up latch (release tab on top) while the bottom port features a Tab-Down latch (release tab on bottom). This arrangement ensures that latch tabs point outward, giving technicians unobstructed access to disconnect either cable without interference from the adjacent port.

What is the significance of the -40℃ TO +85℃ operating temperature range?

The -40℃ TO +85℃ specification defines the stated operating temperature range of the connector assembly. This enables the component to be specified in hardware platforms deployed in unconditioned outdoor cabinets, roadside installations, and industrial factory environments.

How are the Green and Yellow LEDs driven on the host PCB?

The connector includes separate Green and Yellow status indicators for each port. The LED functions should be configured according to the host PHY reference design and the connector's electrical specifications. Depending on the selected LED control scheme, the indicators may be used for link speed, link status, or activity indication.

Does the LPJM17061ABNL support Power over Ethernet (PoE)?

No. The LPJM17061ABNL is specified as an Ethernet(NoN PoE) connector for data-only network interfaces. For applications requiring PoE power delivery, a connector and magnetics solution specifically rated for the required IEEE 802.3 PoE standard and DC current conditions should be selected.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.