HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • IMG_2267(1711592374537).jpg
  • 2(1711592374584).jpg
  • IMG_2276(1711592374567).jpg
  • IMG_2287(1711592374550).jpg
  • IMG_2270(1711592374543).jpg

RM3-168A9V1F Compatible LINK-PP LPJG17512AONL 10/100/1000 Base-T 8p8c Orange&Green/Yellow LED 2x1 Port Cat6 RJ45 Jack

P/N:

LPJG17512AONL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJG17512AONL

  • Compatible Brands: LINK-PP
  • Number of Ports: 2X1
  • Speed: 10Base-T,1000Base-T,100Base-TX
  • PoE: Non-PoE
  • Latch: Both
  • LED Option: Orange&Green / Yellow
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJG17512AONL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LPJG17512AONL

Packaging Details:

N.W/pCS:

0.020kg

Package:

Tray

SPQ:

30pcs

Qty/carton:

540pcs

Carton size:

37*30*30cm

G.W/carton:

10.5kg

Product Specifications

LINK-PP Part Number: LPJG17512AONL Other Part Number RM3-168A9V1F
Part Status Active Connector Type Jack
Number of Positions/Contacts 8p8c (RJ45, Ethernet) Application-Lan Ethernet(NoN PoE)
Number of Ports 2x1 Port Speed 10/100/1000 Base-T
Latch Both Cores per Port 12
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs With LED Option Orange&Green/Yellow Led
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.996/25.30 Package Length (Inches/mm) 1.122/28.49
Package Width (Inches/mm) 0.677/17.20 Temperature 0℃ TO +70℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

RM3-168A9V1F Compatible LINK-PP LPJG17512AONL 10/100/1000Base-T 2x1 RJ45 Jack

Engineered to maximize faceplate I/O density and deliver uncompromising signal integrity in enterprise data centers, the LINK-PP LPJG17512AONL is a high-performance 2x1 (stacked) Gigabit RJ45 modular jack with integrated magnetics. Designed to support robust full-duplex 10/100/1000Base-T (Gigabit Ethernet) throughput, this dual-port MagJack consolidates physical networking interfaces and an advanced 12-core magnetic isolation circuitry into a single shielded block. Operating flawlessly within a commercial temperature envelope of 0°C to +70°C, it provides an exceptionally stable, non-PoE physical layer interface for high-density Network Interface Cards (NICs), optical terminals, and high-bandwidth media players.

Manufactured under stringent ISO9001 and ISO14001 quality management protocols, the LPJG17512AONL guarantees full adherence to IEEE 802.3, UL, REACH, and RoHS regulatory standards. By integrating active signal conditioning and galvanic isolation into a space-saving 2x1 ganged form factor, hardware architects can drastically optimize printed circuit board (PCB) real estate and streamline automated chassis assembly workflows.

RM3-168A9V1F Cross-Reference & BOM Optimization

Developed as an exact form-fit-function compatible replacement for the RM3-168A9V1F, the LPJG17512AONL empowers hardware architects and procurement teams to secure their component supply chains and mitigate shortages. Delivering an identical PCB footprint, matched electrical impedance, and equivalent magnetic characteristics, it serves as a seamless drop-in alternative. It integrates flawlessly into existing motherboard layouts without requiring costly printed circuit board (PCB) redesigns or recertification delays.

High-Density 2x1 Stacked Architecture & EMI Shielding

The mechanical envelope of the LPJG17512AONL is meticulously optimized for spatial efficiency, structural rigidity, and superior electromagnetic compatibility (EMC) in densely packed networking environments.

  • 2x1 Port Matrix: Stacking two Gigabit ports vertically cuts the horizontal PCB footprint in half, making it an essential mechanical configuration for high-density PCIe expansion cards and optical network terminals.
  • Ergonomic Latching (Both): Features a dual-latching orientation (Top port latch up, Bottom port latch down). This ergonomic "belly-to-belly" latch design maximizes finger clearance between the stacked cables, ensuring smooth insertion and extraction by network technicians.
  • Mounting Profile: 90-degree right-angle (side entry) utilizing robust Through-Hole Technology (THT) soldering. Reinforced with heavy-duty T-post retaining structures designed to absorb the significant mechanical insertion forces applied to stacked port blocks.
  • EMI Containment: Enclosed in a continuous, heavy-duty metal shield equipped with active EMI grounding tabs. These tabs make direct electrical contact with the metallic chassis bezel, aggressively containing internal high-frequency emissions and blocking external Radio Frequency Interference (RFI).
  • Visual Diagnostics: Each port is equipped with Bi-color (Orange & Green) and Yellow LEDs, delivering immediate, highly customized visual feedback for Gigabit link speed and network activity directly at the faceplate.

Advanced 12-Core Gigabit Magnetics & Signal Integrity

Embedding the Ethernet isolation circuitry directly within the shielded 2x1 housing delivers vital board-level signal integrity benefits. The LPJG17512AONL stands out by utilizing a premium magnetic topology.

  • 12-Core Magnetic Topology: Unlike standard 8-core Gigabit jacks, the internal transformers and common-mode chokes in this connector utilize an advanced 12-core topology per port. This provides superior common-mode noise suppression, exceptional return loss margins, and enhanced signal fidelity across all four twisted pairs in electrically noisy environments.
  • Galvanic Isolation: Delivers standard-compliant high-voltage electrical isolation between the external network cables and the sensitive internal Gigabit PHY transceivers, guarding against ground loops and electrostatic discharge (ESD).
  • AutoMDIX Support: The internal 1CT:1CT transformer architecture fully supports AutoMDIX protocols, allowing the physical layer to automatically negotiate and correct straight-through or crossover cable configurations without manual intervention.

Hardware Layout & Routing Considerations

To extract optimal Gigabit performance from the LPJG17512AONL, PCB layout engineers must meticulously route the 100-ohm differential pairs between the multi-channel Ethernet PHYs and the RJ45 pins. Because this is a stacked configuration, precise attention must be paid to trace length matching across both the upper and lower port rows to prevent phase skew and near-end crosstalk (NEXT). Ensure that the chassis ground (tied to the connector’s EMI tabs) is physically isolated from the motherboard's digital ground plane to prevent capacitive noise coupling along the faceplate.

Typical Applications

Combining a highly efficient 2x1 stacked architecture, robust 12-core signal conditioning, and active EMI shielding, the LPJG17512AONL is purpose-built for high-capacity, bandwidth-intensive electronic equipment:

  • Networking Infrastructure: High-density Network Interface Cards (NICs), server motherboards, and local area network (LAN) aggregation devices.
  • Telecommunications & Fiber: Optical Network Terminals (ONTs), broadband access hubs, and high-capacity communication gateways.
  • Security & Vision Systems: Multi-channel Networked Video Recorders (NVRs) and centralized IP camera distribution hubs requiring simultaneous Gigabit links.
  • Media & Broadcasting: High-bandwidth digital media players, broadcasting stations, and interactive A/V control centers.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.