HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • IMG_2267(1711532247534).jpg
  • 3(1711532247488).jpg
  • IMG_2270(1711532247478).jpg
  • 2(1711532247475).jpg
  • 1(1711532247457).jpg

71F-1327DDDA2NL Compatible LINK-PP LPJG17561A47NL 10/100/1000 Base-T 8p8c Yellow&Green/Yellow&Green LED 2x1 Port Cat6 RJ45 Jack

P/N:

LPJG17561A47NL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LPJG17561A47NL

  • Number of Ports: 2X1
  • Speed: 10Base-T,100Base-TX,1000Base-T
  • PoE: Non-PoE
  • Latch: Both
  • LED Option: Yellow&Green / Yellow&Green
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJG17561A47NL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: 71F-1327DDDA2NL

Packaging Details:

N.W/pCS:

0.020kg

Package:

Tray

SPQ:

30pcs

Qty/carton:

540pcs

Carton size:

37*30*30cm

G.W/carton:

10.5kg

Product Specifications

LINK-PP Part Number: LPJG17561A47NL Part Number 71F-1327DDDA2NL
Part Status Active Connector Type Jack
Number of Positions/Contacts 8p8c (RJ45, Ethernet) Application-Lan Ethernet(NoN PoE)
Number of Ports 2x1 Port Speed 10/100/1000 Base-T
Latch Both Cores per Port 8
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs With LED Option Yellow&Green/Yellow&Green Led
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.996/25.30 Package Length (Inches/mm) 1.122/28.49
Package Width (Inches/mm) 0.677/17.20 Temperature 0℃ TO +70℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

Dual-Port Stacked 2x1 10/100/1000BASE-T RJ45 MagJack

The LINK-PP LPJG17561A47NL is a dual-port stacked 2x1 10/100/1000 Base-T Gigabit Ethernet RJ45 integrated connector module (MagJack) in a right-angle, side-entry through-hole configuration. Designed with an internal 8-core-per-port magnetic structure (16 cores total), 1CT:1CT turns ratio, integrated Bob Smith termination (BST), and AutoMDX support, the connector supports IEEE 802.3-compliant Ethernet signal isolation and common-mode noise suppression across the specified 0℃ TO +70℃ operating temperature range.

The mechanical assembly features a stacked 2-port vertical matrix, dual-latch ("Both") orientation (top port latch up, bottom port latch down), perimeter shield EMI tabs, Yellow&Green/Yellow&Green bi-color status LEDs, and molded T-Post retaining pins. With dimensions of 25.30 mm (0.996 inches) in height, 17.20 mm (0.677 inches) in width, and 28.49 mm (1.122 inches) in length, the LPJG17561A47NL provides high-density board-edge connectivity suited for dual-port network cards (NICs), optical network terminals (ONT/ONU), digital video recorders (NVR/DVR), and multimedia streaming players.

Lifecycle: Active
Ethernet Speed: 2x1 Port 10/100/1000 Base-T
Cross Reference: 71F-1327DDDA2NL
Port Matrix & Latch: Stacked 2x1 Port / Both Latch
Operating Temperature: 0℃ TO +70℃ Commercial
Qualification Support: Sample Evaluation / Second Source

Compatibility and Design Positioning

The LINK-PP LPJG17561A47NL is positioned as a cross-reference and alternative sourcing option for the 71F-1327DDDA2NL dual-port stacked 10/100/1000 Base-T RJ45 MagJack. The two devices share key characteristics including stacked 2x1 port construction, 8P8C through-hole interfaces, 1CT:1CT turns ratios across all channels, 8 cores per port, dual-latch orientation, Yellow&Green bi-color LED options, commercial 0℃ TO +70℃ operating temperature ratings, and integrated Ethernet magnetics. Engineering teams should verify pin assignments, footprint dimensions, LED circuitry, and mechanical tolerances against the applicable official drawings before approving component substitution.

Procurement and OEM Qualification

For sourcing teams and OEM engineering programs evaluating the LPJG17561A47NL as a second-source or BOM alternative, key qualification parameters include PCB mechanical footprint, pinout alignment, LED drive characteristics, electrical isolation parameters, operating temperature rating, and expected volume demand. LINK-PP can support sample evaluation, mechanical drawing review, and documentation requirements for prototype validation, AVL qualification, and volume production planning.

Stacked 2x1 Topology and Board-Edge Density Optimization

Integrating two Gigabit Ethernet ports into a vertically stacked 2x1 connector format provides distinct mechanical and packaging advantages for space-constrained line cards:

  • 50% Horizontal Board-Edge Space Savings: Stacking two ports vertically in a 2x1 matrix occupies only 17.20 mm (0.677 inches) of horizontal board width, halving front-panel board-edge space requirements compared to deploying two individual single-port connectors side-by-side.
  • "Both" Latch Ergonomics: The top port features a Tab-Up latch while the bottom port features a Tab-Down latch, ensuring unobstructed thumb access to both RJ45 plug release tabs during installation and servicing.
  • 25.30 mm Vertical Height Profile: The 25.30 mm (0.996 inches) housing height matches standard dual-row chassis cutouts across full-height PCIe add-in cards, desktop network appliances, and communications gateways.
  • 0℃ TO +70℃ Commercial Operating Range: The 0℃ TO +70℃ specification defines the stated operating temperature range of the connector assembly, supporting commercial networking, broadband access, and multimedia equipment.
  • Perimeter Shield EMI Tabs & T-Post Retention: Exterior spring tabs establish multi-point grounding contact with the equipment front panel, while molded plastic T-Posts distribute mechanical insertion and extraction stresses directly into the FR4 PCB substrate.

Internal Magnetics Architecture, Gigabit Signaling, and AutoMDX

The LPJG17561A47NL incorporates an internal 8-core magnetic architecture per port (16 cores total across the 2x1 assembly) supporting the four differential pairs required for 10/100/1000 Base-T full-duplex Ethernet communication. A symmetrical 1CT:1CT turns ratio across transmit and receive stages in a T, C configuration enables broad interface compatibility with standard voltage-mode and current-mode Gigabit PHY transceivers.

The integrated magnetics include Bob Smith termination (BST) to help manage common-mode noise, while AutoMDX support enables automatic differential pair crossover detection on each port. Electrical isolation complies with IEEE 802.3 specifications as defined in the product documentation, separating PHY circuitry from line-side transients and cable common-mode noise. The non-PoE data architecture is optimized exclusively for differential high-speed data transmission without DC bias heating.

Mechanical Envelope and PCB Layout Considerations

When integrating the LPJG17561A47NL into host hardware layouts, engineering teams should account for the following structural and electrical parameters:

1. Package Dimensions and Front-Panel Cutout

The connector body measures 25.30 mm (0.996 inches) in height, 28.49 mm (1.122 inches) in length, and 17.20 mm (0.677 inches) in width. Front-panel openings must be designed with appropriate vertical and horizontal clearances to allow unhindered deflection of the perimeter EMI spring tabs.

2. Stacked Port Latch Ergonomics ("Both" Latch)

Because the top port latches upward and the bottom port latches downward, enclosure designers should confirm adequate clearance both above and below the dual-port cutout to allow unhindered finger access when disconnecting cables from either port.

3. Through-Hole T-Post Anchoring and Multi-Layer Pinout

The stacked 2x1 through-hole configuration presents a high-density pin layout to accommodate signals and LEDs for both ports. Verification of drill hole diameters, annular rings, and trace routing breakout channels between adjacent pins is essential to ensure solder joint reliability and signal integrity.

4. Bi-Color Status LED Circuitry

The connector features Yellow&Green bi-color status indicators for each port. Hardware engineers should implement suitable series current-limiting resistors matching the host PHY LED driver polarity and target forward current specifications.

Design Consideration Comparison: Stacked 2x1 MagJack vs. Alternative Layouts

Design Consideration LPJG17561A47NL
Stacked 2×1 Gigabit MagJack
2× Single-Port 1×1
Gigabit MagJacks (Side-by-Side)
Discrete Gigabit Magnetics
+ Modular 2×1 RJ45 Jack
Horizontal Board-Edge Width 17.20 mm (High board-edge density) ~32.00 mm – 34.00 mm (Requires dual footprints) ~17.00 mm – 18.00 mm
Vertical Height Envelope 25.30 mm profile ~13.50 mm profile Variable based on selected modular jack profile
PCB Assembly Operations Single through-hole placement Two separate through-hole placements Multiple placements (SMD transformers + jack)
Latch Accessibility Both (Top latch up / Bottom latch down) Dependent on selected 1×1 orientation Dependent on selected modular jack
Front-Panel Shielding Integrated dual-port shield with EMI tabs Individual shields per port Dependent on chosen external RJ45 shield design
Primary Engineering Focus Front-panel horizontal space consolidation Low vertical profile in 1U enclosures Custom physical placement flexibility

Application Considerations for LPJG17561A47NL

Target Application Profile Primary Engineering Consideration
Dual-Port Network Interface Cards (NICs) Stacked 2x1 layout fits standard full-height PCIe bracket widths, providing two Gigabit ports on a single card slot.
Optical Network Terminals (ONT/ONU) Consolidates local LAN Ethernet interfaces in compact broadband customer-premises equipment (CPE).
Digital Video Recorders (NVR/DVR) Provides dual Gigabit uplinks for separate management and camera streaming networks in video security appliances.
Commercial Media Players & Signage Units Yellow&Green bi-color LEDs provide visual diagnostic feedback for network link speed and data traffic.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials using the LPJG17561A47NL, hardware engineers should confirm the following design parameters against official documentation:

  • Footprint and Pinout Verification: Verify the stacked through-hole pinout, LED pin locations, and T-Post drill sizes against the official LINK-PP LPJG17561A47NL drawing.
  • Bezel Cutout & Dual-Latch Clearance: Confirm that the enclosure front panel provides adequate clearance above and below the port openings for unhindered operation of both latches.
  • LED Drive Polarity and Resistors: Check the host PHY LED driver configuration and select appropriate series resistors for the Yellow&Green bi-color LEDs on both ports.
  • Chassis Grounding Path: Verify that the PCB shield pins connect to a low-impedance chassis ground plane to support front-panel EMI tab performance.
  • PHY Magnetics Compatibility: Confirm that the 1CT:1CT turns ratio and BST termination topology align with the dual-channel transceiver manufacturer's reference schematic.
  • Thermal Environment: Ensure that the operating environment inside the equipment chassis remains within the specified 0℃ TO +70℃ commercial temperature range.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LPJG17561A47NL?

The LPJG17561A47NL is a dual-port stacked 2x1 10/100/1000 Base-T Gigabit Ethernet(NoN PoE) RJ45 MagJack. It features an 8P8C contact configuration per port, 8-core internal magnetics per port, 1CT:1CT turns ratio, dual-latch ("Both") orientation, side-entry through-hole mounting, Yellow&Green bi-color LEDs, integrated BST circuit, AutoMDX support, and an operating temperature range of 0℃ TO +70℃.

Is the LINK-PP LPJG17561A47NL compatible with the 71F-1327DDDA2NL?

The LPJG17561A47NL is positioned as a cross-reference and alternative sourcing option for the 71F-1327DDDA2NL. Both devices share matching stacked 2x1 port footprints, 1CT:1CT turns ratios, 8 cores per port, dual-latch profiles, Yellow&Green bi-color LED configurations, and through-hole PCB footprints. Engineering teams should cross-reference official product drawings before volume changeovers.

What does the "Both" latch orientation mean on a stacked 2x1 connector?

On a stacked 2x1 connector, the "Both" latch orientation indicates that the top RJ45 port features a Tab-Up latch (release tab on top) while the bottom port features a Tab-Down latch (release tab on bottom). This arrangement ensures that latch tabs point outward, giving technicians unobstructed access to disconnect either cable without interference from the adjacent port.

What are the board-level advantages of a stacked 2x1 MagJack over two separate 1x1 jacks?

A stacked 2x1 MagJack positions two ports vertically within a single 17.20 mm (0.677 inches) horizontal board-edge footprint. Compared to placing two 1x1 jacks side-by-side, this reduces horizontal front-panel consumption by roughly 50%, frees up board-edge real estate, and cuts SMT/THT component placement operations in half.

How are the Yellow&Green bi-color LEDs driven on the host PCB?

The connector includes Yellow&Green bi-color status indicators for each port. The LED functions should be configured according to the host PHY reference design and the connector's electrical specifications. Depending on the selected LED control scheme, the indicators may be used for link speed, link status, or activity indication.

Is the LPJG17561A47NL suitable for Power over Ethernet (PoE) applications?

No. The LPJG17561A47NL is specified as an Ethernet(NoN PoE) connector for data-only Gigabit interfaces. For applications requiring PoE power delivery, a connector and magnetics solution specifically rated for the required PoE standard and DC current conditions should be selected.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.